Revell KIT 2033 is a 1/24 scale model kit of the Ferrari F430. The kit includes over 100 pieces and features a detailed engine, interior, and exterior. The finished model measures approximately 7 inches long and is perfect for display or play.
Here are some of the features of the Revell KIT 2033:
- 1/24 scale model kit of the Ferrari F430
- Over 100 pieces
- Detailed engine, interior, and exterior
- Finished model measures approximately 7 inches long
- Perfect for display or play
Revell KIT 2033 is a 1/24 scale model kit of the Ferrari F430. The kit includes over 100 pieces and features a detailed engine, interior, and exterior. The finished model measures approximately 7 inches long and is perfect for display or play.
Here are some of the features of the Revell KIT 2033:
- 1/24 scale model kit of the Ferrari F430
- Over 100 pieces
- Detailed engine, interior, and exterior
- Finished model measures approximately 7 inches long
- Perfect for display or play
FERRARI F430
KIT 2033 85203310200
Aluminum
Flat Black
SemiGloss Black
Gloss Red
Desert Tan
Gloss Black
Flat Red
Silver
Steel
Flat Brown
Transparent Red
Turn Signal Amber
This paint guide is provided to complete this kit
as shown on the box.
Ce guide de peintures est fourni pour reproduire le modèle
réduit qui apparaît sur la boîte.
Aluminum
Noir mat
Noir satiné
Rouge brillant
Brun clair
Noir lustre
Rouge mat
Argenté
Acier
Brun mat
Rouge transparent
Ambré
DECAL PLACEMENT
7
Designated as the replacement model
to the 360 Modena, the new Ferrari
F430 has some rather large shoes to
fill. However, the folks at the Ferrari
factory will seldom disappoint. With
much of the engineering work done at
the Ferrari Formula 1 racing facility, it’s
fair to say that the F430 is a street-legal
race car.
Starting with the basics, the F430
comes equipped with a new 4.3 liter
V-8 developing 490 horsepower without
a turbocharger or supercharger. The
11.3 to 1 compression ratio requires the
use of not one, but four knock sensors.
With a curb weight of just under 3,200
pounds, you’ll see 60 mph from a
standing start in just four seconds. Top
end is north of 190 mph, if you dare.
If you have any questions or comments, call our hotline at: (800) 833-3570
or, please write to:
Revell Inc Consumer Service Department, 1850 Howard Street Unit A, Elk Grove Village, Illinois 60007
Be sure to include the plan number (85203310200), part number, description, your return address and phone number.
Visit our website: www.revell.com
Revell Inc Elk Grove Village, IL. Copyright © 2010. All rights reserved.
* Study the assembly drawings.
* Each plastic part is identified by a number.
* In the assembly drawings, some parts will be
marked by a star (H) to indicate chrome
plated plastic.
* For better paint and decal adhesion, wash
the plastic parts in a mild detergent solution.
Rinse and let air dry.
* Check the fit of each piece before cementing
in place.
* Use only cement for polystyrene plastic.
* Scrape plating and paint from areas
to be cemented.
* Allow paint to dry thoroughly before
handling parts.
* Any unused parts may be discarded.
DECAL APPLICATION INSTRUCTIONS
1. Cut desired decal from sheet.
2. Dip decal in water for a few seconds.
3. Place wet decal on paper towel.
4. Wait until decal is movable on paper backing.
5. Place decal in position on model, face up and
slide backing away.
6. Press out air bubbles with a soft damp cloth.
7. Milkiness that may appear is for better decal
adhesion and will dry clear. Wipe away any
excess adhesive.
8. Do not touch decal until fully dry.
9. Allow the decals 48 hours to dry before
applying clear coat.
NOTE: Decals are compatible with setting
solutions or solvents.
READ THIS BEFORE YOU BEGIN LIRE CE QUI SUIT AVANT DE COMMENCER
* Etudier les schémas de montage.
* Chaque pièce en plastique est identifiée par un numéro.
* Sur les schémas de montage, certaines pièces sont
marquées d'une étoile (H) pour indiquer qu'elles sont en
plastique chromé.
* Pour une meilleure prise de la peinture et des autocollants,
laver les pièces en plastique avec une solution détergente
peu concentrée. Les rincer et les laisser sécher à l'air.
* Vérifier que chaque pièce s'ajuste bien avant
de la coller en place.
* N'utiliser que de la colle pour polystyrène.
* Gratter les parties à coller pour enlever le chrome et la peinture.
* Laisser la peinture bien sécher avant de manipuler les pièces.
* Toute pièce inutilisée peut être jetée.
DIRECTIVES D'APPLICATION DES AUTOCOLLANTS
1. Découper l'autocollant désiré de la feuille.
2. Tremper l'autocollant dans de l'eau pendant quelques secondes.
3. Placer l'autocollant mouillé sur une serviette en papier.
4. Attendez que l'autocollant puisse être déplacé sur son support
en papier.
5. Mettre l'autocollant en position sur le modèle face sur
le dessus et faire glisser le support pour l'enlever.
6. Appuyer avec un chiffon doux humide pour éliminer les bulles d'air.
7. La substance laiteuse qui peut apparaître est destinée à
améliorer l'adhésion de l'autocollant et devient incolore au
séchage. Essuyer pour enlever tout excédent d'adhésif.
8. Ne pas toucher l'autocollant tant qu'il n'est pas bien sec.
9. Laisser l'autocollant sécher pendant 48 heures avant
d'appliquer une couche transparente.
REMARQUE: Les autocollants sont compatibles avec les
solutions de fixage ou les solvants.
* REPEAT SEVERAL TIMES
* A REPETER PLUSIEURS FOIS
* CEMENT TOGETHER
* A COLLER
* REMOVE AND THROW AWAY
* A RETIRER ET JETER
* DO NOT CEMENT
* NE PAS COLLER
* DECAL
* DECAL COMANIE
* ASSEMBLY CAUTION
*ATTENTION D ASSEMBLEE
* OPTIONAL PARTS
* PIECES EN OPTION
* REPEAT PROCEDURE
* REPETEZ LE PROCEDE
``` ```
Kit 2033 - Page 8
ENGINE ASSEMBLY
1EXTERIOR ASSEMBLY
6
B
A
C D
B
C
A
D
18
ENGINE BOTTOM
ALUMINUM
20
REAR AXLE
SEMIGLOSS BLACK
STEEL
SEMIGLOSS
BLACK
21
RIGHT EXHAUST
HEADER
SILVER
23
EXHAUST
SILVER
22
LEFT EXHAUST
HEADER
SILVER
ALUMINUM
24
RIGHT VALVE COVER
FLAT RED
25
LEFT VALVE COVER
FLAT RED
19
PULLEY
ASSEMBLY
SEMIGLOSS
BLACK
SILVER
SEMIGLOSS BLACK
FLAT BLACKSILVERSEMIGLOSS BLACK
FLAT BLACK
27
ENGINE TOP
26
ENGINE
BRACE
ALUMINUM
SEMIGLOSS BLACK
SILVER
FLAT RED
FLAT BLACK
SILVER
FLAT BLACK
SILVER
SEMIGLOSS
BLACK
49
TAILLIGHT
CLEAR
FLAT BLACK
TRANSPARENT RED
47
RIGHT MIRROR
HOUSING
GLOSS RED
19
DECAL
H28
EXHAUST TIP
CHROME
TRANSPARENT AMBER
CLEAR
45
LEFT MIRROR
HOUSING
GLOSS RED
H46
LEFT MIRROR
CHROME
H48
RIGHT MIRROR
CHROME
44
DECAL
43
LEFT HEADLIGHT
COVER
CLEAR
44
RIGHT
HEADLIGHT
COVER
CLEAR
REAR LICENSE
PLATE
18
DECAL
16
DECAL
15
DECAL
19
DECAL
Kit 2033 - Page 7Kit 2033 - Page 2
17
REAR VENT
SEMIGLOSS BLACK
WINDOW / BODY ASSEMBLYCONT.
5BODY / CHASSIS ASSEMBLY
2
B
A
C
D E
GF
H I
13
CHASSIS
SEMIGLOSS BLACK SILVER
4
PEDALS
SEMIGLOSS BLACK
3
DASHBOARD
SEMIGLOSS BLACK
1
STEERING
WHEEL
2
STEERING COLUMN
SEMIGLOSS BLACK
SEMIGLOSS
BLACK
ALUMINUM
SEMIGLOSS BLACK SILVER
GLOSS BLACKSILVER
GLOSS BLACKSILVER
GLOSS BLACK
SILVER
6
BRAKE HANDLE
SEMIGLOSS BLACK
DESERT TAN
SEMIGLOSS BLACK
DESERT TAN
SEMIGLOSS
BLACK
SILVER
9
REAR WALL
DESERT TAN
12
LEFT DOOR PANEL
DESERT TAN
7
INTERIOR
FLAT BROWN
11
RIGHT DOOR
PANEL
DESERT TAN
FLAT BLACK
10
REAR WINDOW
DESERT TAN
42
ENGINE
COMPARTMENT
SEMIGLOSS BLACK
29
FRONT PAN
GLOSS RED
SEMIGLOSS BLACK
SEMIGLOSS BLACK
SEMIGLOSS BLACK
SILVER
SILVER
36
LEFT WIPER
SEMIGLOSS BLACK
37
RIGHT WIPER
SEMIGLOSS BLACK
35
WINDSHIELD
CLEAR
38
VISORS
DESERT TAN
SEMIGLOSS BLACK
SEMIGLOSS BLACK
3
DECAL
4
DECAL
5
DECAL
DECAL
1
DECAL
2
DECAL
12
DECAL
11
DECAL
13
DECAL
69
DECAL
H5
CENTER CONSOLE
CHROME
7
DECAL
9
DECAL
6
DECAL
10
DECAL
17
DECAL
H30
LEFT HEADLIGHT
CHROME
H31
RIGHT HEADLIGHT
CHROME
TRANSPARENT
AMBER
47
DECAL
14
DECAL
53
DECAL
TRANSPARENT
AMBER
8
DECAL 17
DECAL
66
DECAL
67
DECAL
68
DECAL
46
DECAL
SEMIGLOSS BLACK
Kit 2033 - Page 3Kit 2033 - Page 6
INTERIOR ASSEMBLY
3WINDOW / BODY ASSEMBLY
5
WHEEL ASSEMBLY
4
BA
A B
BA
DC
E
8
SEAT
DESERT TAN
8
SEAT
DESERT TAN
14
RIGHT FRONT
AXLE
15
LEFT FRONT
AXLE
SEMIGLOSS
BLACK
STEEL
SEMIGLOSS
BLACK
GLOSS RED
SEMIGLOSS
BLACK
STEEL
SEMIGLOSS
BLACK
50
FRONT INNER
WHEEL
ALUMINUM
52
RIGHT FRONT
DISC BRAKE
STEEL
GLOSS RED
FRONT
TIRE
54
REAR INNER
WHEEL
ALUMINUM
55
LEFT REAR
DISC BRAKE
STEEL
GLOSS RED
REAR
TIRE
SEMIGLOSS BLACK
SEMIGLOSS BLACK
DESERT TAN
39
ENGINE
COVER
PANEL
GLOSS RED
SEMIGLOSS BLACK GLOSS RED
40
ENGINE COVER
CLEAR
39
ENGINE COVER PANEL
GLOSS RED
SEMIGLOSS BLACK
SEMIGLOSS
BLACK
41
HINGE RETAINER
DESERT TAN
20
DECAL
H16
TIE ROD
CHROME
51
LEFT FRONT
DISC BRAKE
STEEL
H53
WHEEL
CHROME
23
DECAL
56
RIGHT REAR
DISC BRAKE
STEEL
H53
WHEEL
CHROME
32
BODY
GLOSS RED
34
RIGHT SIDE
WINDOW
CLEAR
33
LEFT SIDE
WINDOW
CLEAR
32
DECAL
36
DECAL
35
DECAL
34
DECAL
33
DECAL
48
DECAL
20
DECAL
23
DECAL
27
DECAL
31
DECAL
30
DECAL
29
DECAL
28
DECAL
55
DECAL
54
DECAL
39,
40 (OTHER SIDE)
DECAL
41,
42 (OTHER SIDE)
DECAL
Kit 2033 - Page 5Kit 2033 - Page 4
INTERIOR ASSEMBLY
3WINDOW / BODY ASSEMBLY
5
WHEEL ASSEMBLY
4
BA
A B
BA
DC
E
8
SEAT
DESERT TAN
8
SEAT
DESERT TAN
14
RIGHT FRONT
AXLE
15
LEFT FRONT
AXLE
SEMIGLOSS
BLACK
STEEL
SEMIGLOSS
BLACK
GLOSS RED
SEMIGLOSS
BLACK
STEEL
SEMIGLOSS
BLACK
50
FRONT INNER
WHEEL
ALUMINUM
52
RIGHT FRONT
DISC BRAKE
STEEL
GLOSS RED
FRONT
TIRE
54
REAR INNER
WHEEL
ALUMINUM
55
LEFT REAR
DISC BRAKE
STEEL
GLOSS RED
REAR
TIRE
SEMIGLOSS BLACK
SEMIGLOSS BLACK
DESERT TAN
39
ENGINE
COVER
PANEL
GLOSS RED
SEMIGLOSS BLACK GLOSS RED
40
ENGINE COVER
CLEAR
39
ENGINE COVER PANEL
GLOSS RED
SEMIGLOSS BLACK
SEMIGLOSS
BLACK
41
HINGE RETAINER
DESERT TAN
20
DECAL
H16
TIE ROD
CHROME
51
LEFT FRONT
DISC BRAKE
STEEL
H53
WHEEL
CHROME
23
DECAL
56
RIGHT REAR
DISC BRAKE
STEEL
H53
WHEEL
CHROME
32
BODY
GLOSS RED
34
RIGHT SIDE
WINDOW
CLEAR
33
LEFT SIDE
WINDOW
CLEAR
32
DECAL
36
DECAL
35
DECAL
34
DECAL
33
DECAL
48
DECAL
20
DECAL
23
DECAL
27
DECAL
31
DECAL
30
DECAL
29
DECAL
28
DECAL
55
DECAL
54
DECAL
39,
40 (OTHER SIDE)
DECAL
41,
42 (OTHER SIDE)
DECAL
Kit 2033 - Page 5Kit 2033 - Page 4
17
REAR VENT
SEMIGLOSS BLACK
WINDOW / BODY ASSEMBLYCONT.
5BODY / CHASSIS ASSEMBLY
2
B
A
C
D E
GF
H I
13
CHASSIS
SEMIGLOSS BLACK SILVER
4
PEDALS
SEMIGLOSS BLACK
3
DASHBOARD
SEMIGLOSS BLACK
1
STEERING
WHEEL
2
STEERING COLUMN
SEMIGLOSS BLACK
SEMIGLOSS
BLACK
ALUMINUM
SEMIGLOSS BLACK SILVER
GLOSS BLACKSILVER
GLOSS BLACKSILVER
GLOSS BLACK
SILVER
6
BRAKE HANDLE
SEMIGLOSS BLACK
DESERT TAN
SEMIGLOSS BLACK
DESERT TAN
SEMIGLOSS
BLACK
SILVER
9
REAR WALL
DESERT TAN
12
LEFT DOOR PANEL
DESERT TAN
7
INTERIOR
FLAT BROWN
11
RIGHT DOOR
PANEL
DESERT TAN
FLAT BLACK
10
REAR WINDOW
DESERT TAN
42
ENGINE
COMPARTMENT
SEMIGLOSS BLACK
29
FRONT PAN
GLOSS RED
SEMIGLOSS BLACK
SEMIGLOSS BLACK
SEMIGLOSS BLACK
SILVER
SILVER
36
LEFT WIPER
SEMIGLOSS BLACK
37
RIGHT WIPER
SEMIGLOSS BLACK
35
WINDSHIELD
CLEAR
38
VISORS
DESERT TAN
SEMIGLOSS BLACK
SEMIGLOSS BLACK
3
DECAL
4
DECAL
5
DECAL
DECAL
1
DECAL
2
DECAL
12
DECAL
11
DECAL
13
DECAL
69
DECAL
H5
CENTER CONSOLE
CHROME
7
DECAL
9
DECAL
6
DECAL
10
DECAL
17
DECAL
H30
LEFT HEADLIGHT
CHROME
H31
RIGHT HEADLIGHT
CHROME
TRANSPARENT
AMBER
47
DECAL
14
DECAL
53
DECAL
TRANSPARENT
AMBER
8
DECAL 17
DECAL
66
DECAL
67
DECAL
68
DECAL
46
DECAL
SEMIGLOSS BLACK
Kit 2033 - Page 3Kit 2033 - Page 6
ENGINE ASSEMBLY
1EXTERIOR ASSEMBLY
6
B
A
C D
B
C
A
D
18
ENGINE BOTTOM
ALUMINUM
20
REAR AXLE
SEMIGLOSS BLACK
STEEL
SEMIGLOSS
BLACK
21
RIGHT EXHAUST
HEADER
SILVER
23
EXHAUST
SILVER
22
LEFT EXHAUST
HEADER
SILVER
ALUMINUM
24
RIGHT VALVE COVER
FLAT RED
25
LEFT VALVE COVER
FLAT RED
19
PULLEY
ASSEMBLY
SEMIGLOSS
BLACK
SILVER
SEMIGLOSS BLACK
FLAT BLACKSILVERSEMIGLOSS BLACK
FLAT BLACK
27
ENGINE TOP
26
ENGINE
BRACE
ALUMINUM
SEMIGLOSS BLACK
SILVER
FLAT RED
FLAT BLACK
SILVER
FLAT BLACK
SILVER
SEMIGLOSS
BLACK
49
TAILLIGHT
CLEAR
FLAT BLACK
TRANSPARENT RED
47
RIGHT MIRROR
HOUSING
GLOSS RED
19
DECAL
H28
EXHAUST TIP
CHROME
TRANSPARENT AMBER
CLEAR
45
LEFT MIRROR
HOUSING
GLOSS RED
H46
LEFT MIRROR
CHROME
H48
RIGHT MIRROR
CHROME
44
DECAL
43
LEFT HEADLIGHT
COVER
CLEAR
44
RIGHT
HEADLIGHT
COVER
CLEAR
REAR LICENSE
PLATE
18
DECAL
16
DECAL
15
DECAL
19
DECAL
Kit 2033 - Page 7Kit 2033 - Page 2
FERRARI F430
KIT 2033 85203310200
Aluminum
Flat Black
SemiGloss Black
Gloss Red
Desert Tan
Gloss Black
Flat Red
Silver
Steel
Flat Brown
Transparent Red
Turn Signal Amber
This paint guide is provided to complete this kit
as shown on the box.
Ce guide de peintures est fourni pour reproduire le modèle
réduit qui apparaît sur la boîte.
Aluminum
Noir mat
Noir satiné
Rouge brillant
Brun clair
Noir lustre
Rouge mat
Argenté
Acier
Brun mat
Rouge transparent
Ambré
DECAL PLACEMENT
7
Designated as the replacement model
to the 360 Modena, the new Ferrari
F430 has some rather large shoes to
fill. However, the folks at the Ferrari
factory will seldom disappoint. With
much of the engineering work done at
the Ferrari Formula 1 racing facility, it’s
fair to say that the F430 is a street-legal
race car.
Starting with the basics, the F430
comes equipped with a new 4.3 liter
V-8 developing 490 horsepower without
a turbocharger or supercharger. The
11.3 to 1 compression ratio requires the
use of not one, but four knock sensors.
With a curb weight of just under 3,200
pounds, you’ll see 60 mph from a
standing start in just four seconds. Top
end is north of 190 mph, if you dare.
If you have any questions or comments, call our hotline at: (800) 833-3570
or, please write to:
Revell Inc Consumer Service Department, 1850 Howard Street Unit A, Elk Grove Village, Illinois 60007
Be sure to include the plan number (85203310200), part number, description, your return address and phone number.
Visit our website: www.revell.com
Revell Inc Elk Grove Village, IL. Copyright © 2010. All rights reserved.
* Study the assembly drawings.
* Each plastic part is identified by a number.
* In the assembly drawings, some parts will be
marked by a star (H) to indicate chrome
plated plastic.
* For better paint and decal adhesion, wash
the plastic parts in a mild detergent solution.
Rinse and let air dry.
* Check the fit of each piece before cementing
in place.
* Use only cement for polystyrene plastic.
* Scrape plating and paint from areas
to be cemented.
* Allow paint to dry thoroughly before
handling parts.
* Any unused parts may be discarded.
DECAL APPLICATION INSTRUCTIONS
1. Cut desired decal from sheet.
2. Dip decal in water for a few seconds.
3. Place wet decal on paper towel.
4. Wait until decal is movable on paper backing.
5. Place decal in position on model, face up and
slide backing away.
6. Press out air bubbles with a soft damp cloth.
7. Milkiness that may appear is for better decal
adhesion and will dry clear. Wipe away any
excess adhesive.
8. Do not touch decal until fully dry.
9. Allow the decals 48 hours to dry before
applying clear coat.
NOTE: Decals are compatible with setting
solutions or solvents.
READ THIS BEFORE YOU BEGIN LIRE CE QUI SUIT AVANT DE COMMENCER
* Etudier les schémas de montage.
* Chaque pièce en plastique est identifiée par un numéro.
* Sur les schémas de montage, certaines pièces sont
marquées d'une étoile (H) pour indiquer qu'elles sont en
plastique chromé.
* Pour une meilleure prise de la peinture et des autocollants,
laver les pièces en plastique avec une solution détergente
peu concentrée. Les rincer et les laisser sécher à l'air.
* Vérifier que chaque pièce s'ajuste bien avant
de la coller en place.
* N'utiliser que de la colle pour polystyrène.
* Gratter les parties à coller pour enlever le chrome et la peinture.
* Laisser la peinture bien sécher avant de manipuler les pièces.
* Toute pièce inutilisée peut être jetée.
DIRECTIVES D'APPLICATION DES AUTOCOLLANTS
1. Découper l'autocollant désiré de la feuille.
2. Tremper l'autocollant dans de l'eau pendant quelques secondes.
3. Placer l'autocollant mouillé sur une serviette en papier.
4. Attendez que l'autocollant puisse être déplacé sur son support
en papier.
5. Mettre l'autocollant en position sur le modèle face sur
le dessus et faire glisser le support pour l'enlever.
6. Appuyer avec un chiffon doux humide pour éliminer les bulles d'air.
7. La substance laiteuse qui peut apparaître est destinée à
améliorer l'adhésion de l'autocollant et devient incolore au
séchage. Essuyer pour enlever tout excédent d'adhésif.
8. Ne pas toucher l'autocollant tant qu'il n'est pas bien sec.
9. Laisser l'autocollant sécher pendant 48 heures avant
d'appliquer une couche transparente.
REMARQUE: Les autocollants sont compatibles avec les
solutions de fixage ou les solvants.
* REPEAT SEVERAL TIMES
* A REPETER PLUSIEURS FOIS
* CEMENT TOGETHER
* A COLLER
* REMOVE AND THROW AWAY
* A RETIRER ET JETER
* DO NOT CEMENT
* NE PAS COLLER
* DECAL
* DECAL COMANIE
* ASSEMBLY CAUTION
*ATTENTION D ASSEMBLEE
* OPTIONAL PARTS
* PIECES EN OPTION
* REPEAT PROCEDURE
* REPETEZ LE PROCEDE
``` ```
Kit 2033 - Page 8
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
Revell KIT 2033 is a 1/24 scale model kit of the Ferrari F430. The kit includes over 100 pieces and features a detailed engine, interior, and exterior. The finished model measures approximately 7 inches long and is perfect for display or play.
Here are some of the features of the Revell KIT 2033:
- 1/24 scale model kit of the Ferrari F430
- Over 100 pieces
- Detailed engine, interior, and exterior
- Finished model measures approximately 7 inches long
- Perfect for display or play
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
in other languages
- français: Revell KIT 2033
Related papers
-
Revell 2867 User manual
-
-
-
-
-
-
-
-
-
Other documents
-
Epson Equity 4 User manual
-
-
-
-
-
Epson Stylus Photo R1900 Operating instructions
-
Xerox iGen3 User guide
-
-
-
Epson 4880 User manual