Arlotto AR4560 series Quick Installation Manual

Type
Quick Installation Manual

This manual is also suitable for

www.arlotto.com
Quick Installation Guide
AR4260/4560 Series
Packaging contains:
1. Network camera 6. Screws and anchors
2. Bracket 7. Quick installation guide
3. Drill template 8. Warranty
4. 2x Allen key 9. Connection block
5. Power adaptor 10. CD
Camera description:
1. Focus ring 5. DC power in
2. Zoom ring 6. Audio in
3. Local storage slot 7. Audio out
4. I/O block connection 8. Ethernet / POE connection
www.arlotto.com
Locate the drill pattern in the right location to fix the camera and make the drills.
Once the drills are done locate the camera and tightly screw the camera bracket to the wall.
www.arlotto.com
Open the camera cover by unscrewing both Allen bolts at the camera side to have access to the
lens adjustment and the edge storage slot.
Adjust the camera view direction by unscrewing the 2 bracket adjustment Allen screws
www.arlotto.com
Once the camera viewing direction is adjusted with the support of a monitor adjust the lens focus
and zooming.
If you would like to use adge storage before closing the camera cover insert a memory in the micro
SD-card slot, then close the camera.
Close the camera cover tightly by pressing both Allen bolts at the camera side.
www.arlotto.com
Connect the Ethernet cable and DC or POE power input to the camera and proceed to find your
network camera in your web browser, if you would like to add audio, alarm trigger connection or
others please use included connections.
Once camera is connected to the network please open Internet Explorer and go to “tools”, then
select “internet options”, the click on “security” tag and click again on “custom level”. A new
window would be open. Scroll down the list and tick on prompt at “download signed ActiveX
controls” and “Download unsigned ActiveX controls”.
Once this is done accept the chances and the window would close. Now select “trusted sites” and
click on “sites” and at the new window low area type the network camera default IP number
“192.168.1.168”, and tick at “Require server verification for all sites in this zone” then add it and
save all the changes.
www.arlotto.com
Restart the IE web browser and type at the web address window 192.168.1.168 this would
redirect the browser to the network camera and require you to install the ActiveX. Please follow
the indications.
Once ActiveX is loaded the network camera login window would be shown, please type “admin” at
user and “123456” at password.
www.arlotto.com
Submit the access data and you would log in the network camera control interface, now you can
control and change all camera settings.
If you would like to restore network camera factory settings please open the camera and power it
on, press the reset button for 10 seconds. The camera would revert to original status.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7

Arlotto AR4560 series Quick Installation Manual

Type
Quick Installation Manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI