Arlotto AR2230 Series Quick Installation Manual

Brand
Arlotto
Model
AR2230 Series
Category
Security cameras
Type
Quick Installation Manual

This manual is also suitable for

www.arlotto.com
Quick Installation Guide
AR2230/2530 Series
Packaging contains:
1. Network camera
2. Power adaptor
3. Screws
4. Terminal block
5. Drill template
Camera description:
1. IR light sensor 2. Audio in 3. Audio out 4. Video out 5. Reset
6. Iris control 7. Ethernet 8. Not in use 9. Ethernet 10. Local storage
www.arlotto.com
11. IR DC power 12. Terminal block connection 13. IR cut 14. DC power in
15. Not in use 16. Not in use 17. Zoom adjustment 18. Focus adjustment
1. Open the camera by holding the base and turning the camera cover anticlockwise.
2. Decide the camera installation location and make the fixation holes with the help of
the drill template.
www.arlotto.com
3. Screw tightly the network camera and connect the DC power and network cable.
4. Adjust zoom ring and focus the image.
www.arlotto.com
5. Insert a micro SD card in the local memory slot if the camera would be performing
edge recording.
6. Once all initial settings are ready close the camera by placing the dome cover and
turning it clockwise.
7. To be able to access Arlotto IP cam web interface thru IP over Internet Explorer, please
set up the IP camera default level 192.168.1.168 as trusted site. For doing this, please
visit to IE “Internet Options” and select “Security” tag to open “Trust sites” dialog. For
specific to include the default IP address, please click in “sites,” and you may add the
default or future desire IP address to the trusted ones. Notice, you may need to un-tick
“https verification” request. Then apply to save the changes we just did.
www.arlotto.com
8. For being able to download Arlotto ActiveX protocol from camera and have full access to
the IP cam over IE Browser. Please visit the “custom level” at Security section in the
Internet Options. Please find “Download signed ActiveX controls” and “download
unsigned ActiveX controls” to change the security status from “Disable” to “Prompt”.
Then apply to save changes.
9. You will need to close all the browsers and restart it, not the computer, to apply the
changes. When you access the IP cam over IE Browser, you will see the dialog to have
your approval for ActiveX. Please click “Allow” and it will guide you through to login page.
10. For the 1
st
time setup, the default user name and password are required to have access to
your desire setup. Later on, you may change or setup different the user name and
password in the GUI interface.
Default User Name: admin
Default Password: 123456
www.arlotto.com
11. Once access is granted you are ready to change network camera settings.
12. Multi-lingual interface are available at the top left scroll down list in the GUI interface.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

Arlotto AR2230 Series Quick Installation Manual

Brand
Arlotto
Model
AR2230 Series
Category
Security cameras
Type
Quick Installation Manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents