2. Portatree
  3. Eliminator Next Gen & Pocket

Portatree Eliminator Next Gen & Pocket Operating instructions

  • Hello! I've reviewed the user manual for the Portatree Eliminator Next Gen and Pocket pedals. This document provides detailed instructions on how to configure these pedals for throttle and clutch/brake functions, including information about accessing setup menus, selecting button motion, staging, and capturing reaction times. I can assist you further by answering your questions about the content of the document and the pedals themselves.
  • How do I access the setup menu for the left lane on the Eliminator Next Gen?
    What option should I select for button motion when setting up a throttle pedal on the Eliminator Next Gen?
    How do I stage with a clutch or brake pedal on the Eliminator Next Gen?
    How do I access the setup menu on the Portatree Pocket?
    What option I should select for button motion when setting up a clutch or brake pedal on Portatree Pocket?
Next Gen Pedal
Eliminator Next Gen - Throttle Pedal Configuration:
Setup:
1.) Turn on the Eliminator Next Gen
2.) Press the “Practice” icon to enter practice mode
3.) Enter the setup menu for the lane where the pedal is to be used
a. Arrow button on left of screen for Left Lane Settings
b. Arrow button on right of screen for Right Lane Settings
4.) Touch the white box next to “Button Motion”
5.) Select “Press”
6.) Press the arrow button to close the lane setup menu
Use:
1.) Press and release throttle pedal to stage (stage light will turn on in pedal’s lane)
2.) Wait for tree sequence
3.) Press throttle pedal to capture reaction time
Eliminator Next Gen - Clutch or Brake Pedal Configuration:
Setup:
1.) Perform Steps 1 through 4 from throttle pedal setup
2.) Select “Release”
3.) Press the arrow button to close the lane setup menu
Use:
4.) Press and hold the pedal to stage (stage light will turn on in pedal’s lane)
5.) Wait for tree sequence
6.) Release pedal to capture reaction time
Left Lane
Settings
Right Lane
Settings
Portatree Pocket -Throttle Pedal Configuration:
Setup:
1.) Turn on the Portatree Pocket
2.) Press the Tree button to enter practice mode
3.) Press the Tree button followed by the Up/Down Arrow keys until “SETUP” is highlighted
4.) Press the Tree button to enter the setup menu
5.) Continue to press the Tree button until “Button Motion” is displayed
6.) Use the Up/Down Arrow keys until “Press” is selected
7.) Press the Tree button followed by the Up/Down Arrow keys until “EXIT” is highlighted
8.) Press the Tree button to exit the setup menu
Use:
1.) Press and release throttle pedal to stage (stage light will turn on)
2.) Wait for tree sequence
3.) Press throttle pedal to capture reaction time
Portatree Pocket - Clutch or Brake Pedal Configuration:
Setup:
1.) Perform Steps 1 through 5 from throttle pedal setup
2.) Use the Up/Down Arrow keys until “Release” is selected
4.) Press the Tree button followed by the Up/Down Arrow keys until “EXIT” is highlighted
5.) Press the Tree button to exit the setup menu
Use:
1.) Press and hold the pedal to stage (stage light will turn on)
2.) Wait for tree sequence
3.) Release pedal to capture reaction time
/