Axis 24607R1 Power Manual

Axis
Brand
Axis
Model
24607R1
Category
Security camera accessories
Type
Power Manual

This manual is also suitable for

Camera Housing
This document is an addendum to the Camera
Housing & Accessories Operating Instructions and
describes how to connect power to the AXIS 221
installed in the outdoor housing. Please read
through both instructions carefully before
proceeding with the installation.
Camera housing with AXIS 221 installed
Follow the instructions in the Camera Housing &
Accessories Operating Instructions to install the
Axis network camera.
Follow these instructions to connect power to the
camera:
Connect the supplied cable from the power connector
in the camera housing (1,3) to the connector on the
back of the camera (2,4).
No. Color Description
1
Black Power connector GND (-)
2
Black Camera GND (-)
3
Red Power connector DC Power (+)
4
Red Camera DC Power (+)
2
4
3
1
4
2
This description applies to the following articles:
Important!
Make sure that the + and - wires are connected correctly. If not,
the camera may be damaged when power is applied.
Item Part no.
VT Power Supply OHEPS19 0217-011
VT Verso Housing HPV42K1A000 0217-001
AXIS 221 Network Camera 0221-0xx
2005 Rev 1.00 Part no. 24607
Powering
the
AXIS 221 Network Camera
in a Videotec Verso
Outdoor Housing
  • Page 1 1
  • Page 2 2

Axis 24607R1 Power Manual

Axis
Brand
Axis
Model
24607R1
Category
Security camera accessories
Type
Power Manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents