Concepts In Wood LO24-PC Installation guide

Brand: Concepts In Wood

Model: LO24-PC

Type: Installation guide

Concepts In Wood LO24-PC is a literature organizer that helps you to keep tidy your documents and other paperwork at home or in the office. The organizer has 7 horizontal partitions and 2 vertical partitions, giving you plenty of space to store your files. The shelves are adjustable, so you can customize the organizer to fit your specific needs.

The organizer is made of high-quality wood and has a solid wood finished edge. It is easy to assemble, and all the necessary hardware is included in the package. The organizer also comes with 24 labels, so you can easily identify the contents of each shelf.

ASSEMBLY MANUAL

Literature Organizer

Model # LO 24 PC

CAUTION

MUST HAVE 2 PEOPLE

TO ASSEMBLE. DO NOT

LIFT OR TILT ON SIDE

OR EDGES AFTER

ASSEMBLY.

TOOLS REQ. * Screwdriver

* Rubber Mallet

* A Friend

IMPORTANT

DEAR CUSTOMER,

To ensure that you have a speedy and pleasant time assembling your unit

PLEASE READ THE INSTRUCTIONS CAREFULLY BEFORE BEGINNING ASSEMBLY.

If you need assistance, DO NOT CALL THE STORE, call us. Our Customer Service Group is

here to help you. CALL MONDAY-FRIDAY, BETWEEN 8:00 AM TO 3:00 PM PACIFIC TIME.

Please be sure to follow the construction order in the Assembly Manual and complete each

step before you proceed to the next step.

Call: USA

Plycraft Industries Inc.

2100 E. Slauson Ave.

Huntington Park, CA 90255

Email: plycraf[email protected].com

Toll Free Telephone: 1-800-765-9035 Telephone: 1-323-587-8101 Fax: 1-323-587-8220

List of Parts (Quantity per Model)

Wood Parts: HARDWARE PACK

Number Description Qty. Description Picture (not drawn to scale)

1. Right Side 1 Fastener Pins 8

2. Bottom 1

3. Top 1 Cams 8

4. Left Side 1

5. Vertical Partition 2 Screws for Back Panel 10

6. Horizontal Partition 7

7. Back Panel 1 Label Holder Channels 7

Labels 24

Step 1.

Dear Customer, please READ INSTRUCTION STEPS carefully before beginning. Assemble in general area you

want your new Literature Organizer to be placed.

Step 2. On a clean soft surface, such as a carpet or the inside of the carton, place RIGHT SIDE # 1, with pre

drilled holes

and 7 grooves facing up, and solid wood finished edge facing to you. See Figure 1.

Step 3. Insert and screw 4 fastener pins into the 4 predrilled holes of the RIGHT SIDE# 1. See Figure 1.

Step 4. On a clean soft surface, such as a carpet or the inside of the carton, place LEFT SIDE # 4, with predrilled holes

and 7 grooves facing up, and solid wood finished edge facing to you. See Figure 1.

Step 5. Insert and screw 4 fastener pins into the 4 predrilled holes of the LEFT SIDE# 4. See Figure 1.

Step 6. With your friend, install BOTTOM # 2 vertically into corresponding holes of RIGHT SIDE # 1, with the 4 large

predrilled holes facing the inside of the Literature Organizer. Press together firmly and carefully to close all

gaps. See Figure 1.

Step 7. With your friend, install TOP # 3 vertically into corresponding holes of RIGHT SIDE # 1, with the 4 large

predrilled holes facing the inside of the Literature Organizer. Press together firmly and carefully to close all

gaps. See Figure 1.

Step 8. Install 4 Cams into the large predrilled holes of the BOTTOM # 2 and TOP # 3. The large predrilled holes of

BOTTOM # 2 are located at the inside of the unit, where it is installed into the RIGHT SIDE # 1. The large

predrilled holes of TOP # 3 are located at the inside of the unit, where it is installed into the RIGHT SIDE # 1.

Point the arrow on the Cam in the direction of the fastener pin. Push the Cam into the large predrilled hole. Use

a screwdriver, to turn each Cam clock-wise ½ turn to lock it in place. DO NOT OVER TIGHTEN. See Figure 2.

Step 9. With your friend, carefully install LEFT SIDE # 4, into the dowels of TOP # 3 and BOTTOM # 2 and with 7

grooves facing the inside of the Literature Organizer and solid wood finished edge facing front of unit.

Press together firmly and carefully to close all gaps. See Figure 1.

Step 10. Install 4 Cams into the large predrilled holes of the BOTTOM # 2 and TOP # 3. The large predrilled holes of

BOTTOM # 2 are located at the inside of the unit, where it is installed into the LEFT SIDE #4. The large

predrilled holes of TOP # 3 are

located at the inside of the unit, where it is installed into the LEFT SIDE #4. Point

the arrow on the Cam in the direction of the fastener pin. Push the Cam into the large predrilled hole. Use a

screwdriver, to turn each Cam clock-wise ½ turn to lock it in place. DO NOT OVER TIGHTEN. See Figure 2.

Step 11. Dear Customer with your friend carefully rotate the unit onto its face.

Step 12. From the back of the unit slide 7 HORIZONTAL PARTITIONS into grooves of RIGHT SIDE #1 and LEFT

SIDE #4. See Figure 3.

Step 13. SLIDE 2 VERTICAL PARTITIONS into groove lines of TOP #3 and BOTTOM #2 . See Figure 4.

Step 14. Place BACK PANEL # 7 on the back of the unit with finished side towards the inside of the unit. Install

BACK PANEL # 7 with screws provided in hardware pack. See Figure 5.

Step 15. IMPORTANT: BACK PANEL # 7 must be completely aligned with RIGHT SIDE # 1, LEFT SIDE # 4,

BOTTOM # 2 and TOP # 3 as well as to ensure a square Literature Organizer. If necessary slightly move

any of the four corners to the left or right to line up with the BACK PANEL # 7. See Figure 5.

Step 16. Together with your friend carefully lift up the unit to its up right position. Attach 7 LABEL HOLDER

CHANNELS to front of 7 HORIZONTAL PARTITIONS. See Figure 6.

Step 17. Place LABELS in desired locations. See Figure 6.

Step 18. Dear customer, for better protection please leave the already attached FELT-PADS under the BOTTOM #

We sincerely hope that you enjoyed assembling your LITERATURE ORGANIZER

and that you will make good use of it.

Concepts In Wood LO24-PC Installation guide

Concepts In Wood LO24-PC Installation guide

Concepts In Wood LO24-PC Installation guide

Related papers

Other documents