1. First recommendations:
• See the
Media type functionality & features and choose the most appropriate media.
• It is essential you have the media type correctly calibrated with the printer, refer to
Calibrate
my printer.
• In order to get a correct display, it’s also essential to have the monitor profiled, refer to
Profile
my monitor.
2. Open the EFI Designer Edition RIP.
3. EFI Designer Edition RIP settings, Preferences:
• Select the Color tab:
o Color output preset: Select Proofing.
o Image profiles:
• Check EFI profiles.
• Input RGB: Select the source profile of your file if it is in RGB or there are
any RGB images in the file, select the Add profile button to add it. If
you don’t have it, select one from the list and Perceptual.
• Input/Emulation CMYK: Select the Select profile you want to emulate. If
it is not there, Select the Add profile button and browse to it.
Select Relative Colorimetric (Absolute Colorimetric if you want to emulate
the white of the paper).
o Media profiles (output):
• Paper name: Select the paper type that is loaded in the printer (always
calibrated).
• Print quality: 600 x 600.
2