1. First recommendations:
• See the
Media type functionality & features and choose the most appropriate media.
• It is essential you have the media type correctly calibrated with the printer, consult the
Calibrate my printer document.
• In order to get a correct display, it’s also essential you have the monitor calibrated, consult
the
Profile my monitor document.
2. Open the EFI Designer Edition RIP.
3. EFI Designer Edition RIP settings, Preferences:
• Select Color tab:
o Color output preset: Select Proofing.
o Image profiles:
• Select EFI profiles.
• Input RGB: Select the source profile of your file if it is RGB or have any
RGB image, press the Add profile button to add it. If you don’t have it,
select one of the list and Perceptual.
• Input/Emulation CMYK: Select the press profile you want to emulate. If
it is not there, select the Add profile button and browse to it.
Select Relative Colorimetric (Absolute Colorimetric if you want to emulate
the white of the paper).
o Media profiles (output):
• Paper name: Select the paper type that is loaded in the printer (always
calibrated).
• Print quality: 600 x 600.
2