KIA K200SO-A User manual

Category
Car media receivers
Type
User manual
BEFORE USE
INSTRUCTION MANUAL
K200SO-A
MP3/WMA CD PLAYER
WITH AM/FM RADIO
Before operating the unit, please read this
BEFORE USE
1. OPERATING INSTRUCTIONS ------------------------------------- Page 03
manual thoroughly and retain it for
future reference
2. GENERAL ---------------------------------------------------------------- Page 04
3. ANTI-THEFT SECURITY CODE ----------------------------------- Page 07
4. RADIO --------------------------------------------------------------------- Page 08
5. CD PLAYER ------------------------------------------------------------- Pa
g
e 09
g
6. AUX PLAYER ----------------------------------------------------------- Page 13
7. HANDLING COMPACT DISCS ------------------------------------- Page 14
8. LCD DISPLAY FOR CD PLAYER ERROR ---------------------- Page 15
9. PRODUCT AND WARRANTY SERVICE ------------------------ Page 16
10. MP3/WMA INFORMATION AND NOTICE -------------------- Page 17
11. WARNING AND PRECAUTIONS -------------------------------- Page 18
12 SPECIFICATIONS
Page 19
12
.
SPECIFICATIONS
---------------------------------------------------
Page
19
2
⑰⑱
OPERATING INSTRUCTIONS
⑪⑦⑮④
POWER (ON / OFF / Volume)
PRESET 1 MEMORY (DISP – Display Mode)
AUDIO SETTING SELECT / TUNING
PRESET 2 MEMORY (SCAN – Scan Mode)
WARNING LED
PRESET 3 MEMORY (RPT – Repeat Mode)
AUDIO MUTE BUTTON (MUTE)
PRESET 4 MEMORY (RDM Random Mode)
FM/AM BAND BUTTON (FM/AM)
PRESET 5 MEMORY (DIRECTORY DOWN)
MODE BUTTON (MODE)
PRESET 6 MEMORY (DIRECTORY UP)
AUTOMATICAL DOWN TUNING
TRACK DOWN & REVIEW
EJECT
AUTOMATICAL UP TUNING
TRACK UP & CUE
EQUALIZER (EQ)
AUX CONNECTOR (AUX)
CD SLOT
Note: Numbers inside circles e.g. are used throughout this manual, to refer to each of the buttons
shown on this page.
3
GENERAL
②①
POWER ON/OFF BUTTON
Press button momentarily to turn the set on or off. When the set is next switched on, the
previous mode and disc play position will be restored.
VOLUME UP/DOWN CONTROL
Turn button right to increase the volume level. The level will be shown as “VOLUME xx” on the
display panel. Turn button left to decrease the volume level. After 5 seconds the display will
return to the previous mode.
START-UP VOLUME LEVEL SET UP
Start-up volume is the volume level the set will play at when next turned on. To adjust the start-up
volume, press and hold button longer than 3 seconds. The current start-up volume level is
displayed as a flashing number on the display panel.
Turn button left or right to increase or decrease the volume, then press button again to set
that volume level as the start-up volume level.
SOUND SETTING SELECTION
This button is to adjust the sound. Each time you momentary press button ,LCDdisplayseach
mode as follows :
BASS MIDDLE TREBLE BAL L=R FADER F=R BEEP 2ND LOUD ON
On each setting, the level can be controlled by turning button . The display will automatically
return to the previous mode 5 seconds after the last adjustment is made.
Note: When the EQ mode is activated, the BASS, MIDDLE, TREBLE and LOUD modes are not
displayed.
BASS
CONTROL
(
1
ST
setting)
BASS
CONTROL
(
1
setting)
To adjust the bass tone level, first select the bass mode by pressing button until “BASS”
appears on the display panel. Within 5 seconds of selecting the BASS mode, turn button right
or left to adjust the bass level as desired. The bass level will be shown on the display panel from a
minimum of “BASS –10” to a maximum of “BASS+10”. The display will automatically return to the
normal indication in 5 seconds after the last adjustment, or when another function is activated.
4
MIDDLE CONTROL (2
nd
setting)
To adjust the mid tone level, first select the middle mode by pressing button until “MIDDLE”
appears on the display panel. Within 5 seconds of selecting the middle mode, turn button right
or left to adjust the mid level as desired. The mid level will be shown on the display panel from a
ii
“MIDDLE
10
t
i
“MIDDLE
+
10
Th
di l
ill
ttill
t
t
GENERAL
m
i
n
i
mum o
“MIDDLE
-
10
t
oamax
i
mum o
“MIDDLE
+
10
.
Th
e
di
sp
l
ay w
ill
au
t
oma
ti
ca
ll
yre
t
urn
t
o
the normal indication in 5 seconds after the last adjustment or, when another function is activated.
TREBLE CONTROL (3
rd
setting)
To adjust the treble tone level, first select the treble mode by pressing button until “TREBLE
appears on the display panel. Within 5 seconds of selecting the treble mode, turn button right
or left to adjust the treble level as desired. The treble level will be shown on the display panel from
a minimum of “TREBLE -10” to a maximum of “TREBLE +10”. The display will automatically return
to the normal indication in 5 seconds after the last adjustment, or when another function is
activated.
BALANCE CONTROL (4
th
setting)
To adjust the left-right speaker balance, first select the Balance mode by pressing the Select
button until the “BAL” indication appears on the display panel. Within 5 seconds of choosing the
Balance mode, turn right/left to adjust the balance as desired. The balance position will be shown
by the bars on the display panel from “BAL 10L” (full left) to “BAL 10R”(full right). When the volume
level between the left and right speakers is equal, “BAL L=R” will be shown on the display panel.
The display will automatically return to the normal indication in 5 seconds after the last adjustment
or when another function is activated.
FADER CONTROL (5
th
setting)
To adjust the front-rear speaker balance, first select the Fader mode by pressing the Select button
til
th
“FADER”
idi ti
th
di l
l
Withi
5
d
f
hi
th
un
til
th
e
“FADER”
i
n
di
ca
ti
on appears on
th
e
di
sp
l
ay pane
l
.
Withi
n
5
secon
d
so
f
c
h
oos
i
ng
th
e
Fader mode, turn right/left to adjust the front-rear speaker level as desired. The fader position will
be shown by the bars on the display panel from “FADER 10F” (full front) to “FADER 10R”(full rear).
When the volume level between the front and rear speaker is equal, “FADER F=R” will be shown
on the display panel. The display will automatically return to the normal indication in 5 seconds
after the last adjustment or when another function is activated.
BEEP CONTROL (6
th
setting)
To adjust the Beep mode, first select the Beep mode by pressing the Select button until “BEEP”
appears on the display panel. The Beep mode will be shown on the display panel from “BEEP
2ND”, “BEEP OFF” and “BEEP ON”. The display will automatically return to the normal indication in
5
seconds
after
the
last
adjustment
or
when
another
function
is
activated
Select
BEEP
ON
when
5
seconds
after
the
last
adjustment
or
when
another
function
is
activated
.
Select
BEEP
ON
when
you wish to hear the “BEEP” sound whenever any function button is pressed. Select “BEEP 2ND”
when you wish to hear the “BEEP” sound whenever any Tuner Pre-set button and/or Track cue or
review buttons are pressed. Once the desired setting is displayed, press button to save your
selected setting
.
LOUDNESS CONTROL (7
th
setting)
When listening to music at low volume levels, this feature will boost the bass and treble response.
This action will compensate for the reduction in bass and treble performance experienced at low
volume. To select the loudness feature, press button until “LOUD ON” or “LOUD OFF” is
displayed, then turn button left or right to activate or deactivate loudness.
5
GENERAL
WARNING LED
This LED lamp blinks every 1 second when the ignition is turned OFF.
AUDIO MUTE BUTTON (MUTE)
Press Mute button momentarily to mute volume and “MUTE” mark will blink on the LCD panel.
Press the button again to return to the mode in use before the Mute mode was activated.
⑥③
MODE BUTTON
Press MODE button to select
RADIO CD AUX
EQUALIZER (EQ)
You can select an equalizer curve for 4 music types (CLASSIC, POP, ROCK, JAZZ).
Press EQ button repeatedly until the desired equalizer effect is displayed. Each time you press
this button, LCD displays each mode as follows :
this
button,
LCD
displays
each
mode
as
follows
:
CLASSIC POP ROCK JAZZ EQ OFF
6
ANTI-THEFT SECURITY PIN CODE INPUT
To activate the security pin code, please follow these steps.
1. Turn on your stereo.
2. If the stereo screen indicates “1 CDE”, this is a message that you need enter your anti-theft
ANTI-THEFT SECURITY PIN CODE
security pin code.
3. Your security pin code number can be found on the card supplied with your new KIA vehicle.
4. Every KIA stereo has its own individual anti-theft security pin code. Entering an incorrect pin
code or using incorrect procedures will not activate your stereo to an operational status.
5. Your anti-theft pin code is made up of four computer-generated numbers.
6. An example pin code may be 3212.
7. To enter pin code 3212 into your stereo, always follow these steps,
a. Press Pre-set 1 button three times.
bPressPre
-
set 2 button
twice
b
.
Press
Pre
set
2
button
twice
.
c. Press Pre-set 3 button once.
d. Press Pre-set 4 button twice
e. Check that the PIN code shown on your stereo screen is “3212”.
f. Press Pre-set 5 button to activate the pin code.
Your Stereo is now readied for full operation.
8. Another example pin code number is 7963.
9. To enter pin code 7963 into your stereo, always follow these steps,
a. Press Pre-set 1 button seven (7) times.
b. Press Pre-set 2 button nine (9) times.
c. Press Pre-set 3 button six (6) times.
d. Press Pre-set 4 button three (3) times.
e. Check that the PIN code shown on your stereo screen is “7963”.
f. Press Pre-set 5 button to activate the PIN code.
10. Important : If you have entered the incorrect anti-theft pin code or used an incorrect procedure
at your first attempt, your stereo screen will exhibit the following message “2 CDE”. This means
you need enter the pin code a second time taking care to follow these instructions and enter the
correct pin code.
11. If the stereo screen show the message “3 CDE”, this means you failed to follow the correct
instructions or that you entered the incorrect pin code.
12
If
you
fail
to
succeed
to
enter
the
correct
pin
code
at
the
third
attempt
your
stereo
will
turn
off
12
.
If
you
fail
to
succeed
to
enter
the
correct
pin
code
at
the
third
attempt
,
your
stereo
will
turn
off
.
You will need to wait at least one hour before attempting to re-enter the correct anti-theft
security pin code number using the above procedures correctly.
Your KIA stereo has the anti-theft security pin code entered into it prior to you collecting your new KIA
car.
The only time your stereo will identify the message “1 CDE” in the screen is if your stereo or car
has lost battery power.
If your car battery is in good order, your stereo will accept your anti-theft security pin code number
using the above procedure.
If you experience a failure to operate your stereo after carrying out the above procedure.
Please visit a KIA Dealer for additional assistance.
Pl d t l d t i i ti
th ft it i d b i
Pl
ease
d
o no
t
l
eave your car
d
con
t
a
i
n
i
ng your an
ti
-
th
e
ft
secur
it
y p
i
n co
d
e num
b
er
i
n your car.
Keep your card featuring your pin code number in a safe secure place.
7
RADIO
FM/AM BAND SELECTOR (FM/AM)
Each time this button is pressed, the radio band is changed.
Each time this button is pressed, LCD displays each band as follows:
FM1 FM2 FM3 AM
②⑩ ⑫⑬ ⑭⑮
MANUAL TUNING
To manually tune to a radio station, turn button left or right to increase or decrease the radio
frequency.
, UP/DOWN TUNING ( , )
To automatically select a radio station, momentarily press the UP TUNE SEEK button ( ) or
DOWN TUNE SEEK button ( ) . The tuner will search for the next radio station.
~ STATION PRE-SET BUTTON
Whilst in radio mode, pressing buttons to for less than 3 seconds will recall the radio station
t
t
th t
btt
T
t
di
tti
it
f
th
6
t
i
i
ith
pre-se
t
t
o
th
a
t
b
u
tt
on memory.
T
os
t
ore ra
di
os
t
a
ti
ons
i
n
t
o any o
f
th
e
6
pre-se
t
memor
i
es,
i
ne
ith
e
r
the AM or FM bands, use the following procedure:
a. Turn the radio on and select the desired band.
b. Select the radio station to be pre-set using the manual or automatic tuning methods describer
earlier.
c. Press and hold any of the pre-set buttons for longer than 3 seconds. The pre-set number will
appear on the display panel indicating that the radio station is now set into that pre-set memory
location.
Note: By pressing any pre-set button, the radio station stored in that memory location can be
recalled at any time.
8
CD PLAYER
TRACK DOWN & REVIEW BUTTON
This button is used to select track down.
Each time the Backward Track select ( ) is pressed, track number is decreased.
Press and hold this button ( ) to advance rapidly in the backward direction.
High-speed audible search of any track on a disc can be made by this button (Backward
Direction).
TRACK UP & CUE BUTTON
⑩⑦
This button
is used to select track up.
Each time the Forward Track select ( ) is pressed, track number is increased.
Press and hold this button ( ) to advance rapidly in the forward direction.
High-speed audible search of any track on a disc can be made by this button (Forward
Direction).
Note: In case of playing MP3 disc, you can search the file in CUE and REVIEW with Audio (not
audible). Play CUE and REVIEW within a located file (song) and play sounds automatically
at the first selection of a file.
ID3 v2 (DISP)
Button is used to change the displa
y
information. While playing an MP3/WMA file, you
can change the file information shown on the
display. Each time button is pressed, the
display changes to show the information shown
at right.
Note: If the MP3/WMA file/track has no ID3
information, the display will show “NO ID3”.
Directory name / file name (normal mode)
Album name / performer / title
Track number / elapsed time
9
CD PLAYER
MP3 DIRECTORY/FILE SEARCHING
Button is used to select a particular directory and file on an MP3 disc. Press and hold button
for more than 3 seconds. Then, turn button right or left to display the available directories. Press
button momentarily when the desired directory is displayed, then turn button left or right to
display the tracks within that directory. Press button when the desired file is displayed to begin
playback.
The Directory reading method is different as follows depending on the burning software like Easy CD
or Nero Burning.
If you want to search for a file/track in the selected directory, turn button right or left.
Press button
when you find the desired wanted. The unit will then play that selected file.
For example the file search changes in Dir01 as follows
ROOT Dir01 Dir02 Dir03 Dir04 Dir05 Dir06 Dir07
Method 1 :
Method 2 :
ROOT Dir01 Dir02 Dir05 Dir03 Dir06 Dir04 Dir07
For
example
,
the
file
search
changes
in
Dir01
as
follows
.
File01 File02 File03 File04
ROOT
Directory01
10
Dir02
Dir03
Dir04File01
File02
File05 File06 Dir05
File07
File08
Dir06
File09 File10
Dir07
File03
File04
CD PLAYER
TRACK SCAN (SCAN)
During disc play, press button to play the first 10 seconds of each track on the disc. “SCN” will
appear on the display panel. When the desired track is reached, press button again to cancel
the function. The set will then play the selected track. Track scan mode can be cancelled by
activating random play, repeat play, track up/down or directory up/down button.
Note: When scan playing an MP3 disc, press and hold button longer than 3 seconds; “SCN” will
blink
on
the
display
panel
and
all
files
in
the
selected
directory
will
be
introduced
until
the
⑪⑫
blink
on
the
display
panel
and
all
files
in
the
selected
directory
will
be
introduced
until
the
scan mode is cancelled by pressing button again, or by activating the random play, repeat
play, track up/down or directory up/down button.
REPEAT PLAY SELECTOR (RPT)
During disc play, press button to play the selected track repeatedly. “RPT” will appear on the
display panel. Playback of the track will continue to repeat until the button is pressed again; “RPT”
then disappears from the display panel. Repeat Play mode will also be cancelled by activating
random play or scan play button.
Note: In case of playing MP3 disc, when button is pressed and held longer than 3 seconds,
“RPT will blink on the display panel and play all files in the selected directory. The playback
will
be
repeated
until
the
directory
repeat
mode
is
cancelled
by
pressing
the
repeat
button
will
be
repeated
until
the
directory
repeat
mode
is
cancelled
by
pressing
the
repeat
button
again, or by activating random play or scan play button. “RPT” will then disappear from the
display.
RANDOM PLAY SELECTOR (RDM)
During disc play, press button to play tracks on the disc in a random or shuffled order. “RDM”
will appear on the display panel. The track select function will also select tracks in the random
mode instead of the normal sequence. The random play mode can be cancelled by activating scan
play or repeat play button.
Note: In case of MP3 playback; when the random button is pressed and held longer than 3 seconds,
“RDM” will blink on the display panel and play all files in the current directory randomly until
th
di t
d
d
i
ll d
b
i
btt
i
b
ti ti
l
11
th
e
di
rec
t
or
y
ran
d
om mo
d
e
i
scance
ll
e
d
b
ypress
i
ng
b
u
tt
on
aga
i
no
r
b
yac
ti
va
ti
ng scan p
l
ay
or repeat play button. “RDM” will disappear from display panel.
CD PLAYER
DIRECTORY DOWN (D-)
During MP3 playback, selection of the previous directory (if available on the MP3 disc) is possible
by pressing button briefly. The previous directory is located each time button is pressed.
DIRECTORY UP (D+)
During MP3 playback, selection of the next directory (if available on the MP3 CD) is possible by
pressing button briefly. The next directory is located each time button is pressed.
⑭⑮
Note: If the MP3 disc does not contain directories, the set plays MP3 tracks at 10-file intervals
whenever button is pressed.
If the disc does not contain any MP3 files, this function does not operate.
If the directory does not contain any MP3 files, the directory will not be shown.
DISC EJECT ( )
By pressing DISC EJECT button , the disc will be ejected and the set will return to the previous
mode.
Note: When in case of Eject Error, press the Eject button for more than 5 seconds. The CD will
force-eject.
DISC SLOT
With the printed label surface facing up, gently insert the disc into the slot until the soft loading
mechanism engages. The display panel will show “READING” and then disc playback will
commence.
Note: - Load the disc at a straight angle into the slot.
- This set is designed to play standard 5” (12cm) compact discs ONLY.
- Do not attempt to use 3” (8cm), either with or without an adapter, or discs fitted with an
outer edge trim or frame, as damage to the player and/or disc can occur. Damage to these
discs and/or set will not be covered b
y
the
p
roduct warrant
y
.
12
yp y
AUX PLAYER
AUX CONNECTOR (AUX)
Your Portable
Media Player
AUX
CONNECTOR
(AUX)
It is possible to connect your portable media player to the car audio system for playback of the audio
tracks via the car speakers.
To get the best results when connecting the portable media to the car audio system, follow these
steps:
a. Use a 3.5mm stereo plug cable to connect the media player headphone socket at each end as
follows,
b. Adjust the portable media player to approximately 3/4 volume and start playback.
c. Press the MODE button on the car audio set until it's display shows "AUX MODE".
d. The volume and tone can now be adjusted on the car audio set to the desired level.
Note:
- The audio quality of your media player and the audio tracks on it may not be of the same sound
quality as the car audio system's CD player.
- If the sound of the media player is too low compared with the radio or CD, increase the volume of
the player.
- If the sound of the media player is too loud and/or distorted, decrease the volume of the player.
- When in AUX MODE, only the VOLUME, BASS, MID, TREBLE, EQ, and MODE functions of the
car audio set can be used.
- For technical information regarding the AUX input, refer to the specification section at the end of
this manual.
13
1) Dirt, dust, scratches, and disc warpage can cause skipping in the play back and deterioration of
sound quality.
Please observe these guidelines to take care of your compact discs :
Fingerprints, dust and dirt should be carefully wiped off the disc's playing surface (shiny side) with
a soft cloth. Wipe in a straight motion from the inside to the outside of the disc.
HANDLING COMPACT DISCS
a
soft
cloth.
Wipe
in
a
straight
motion
from
the
inside
to
the
outside
of
the
disc.
Never use chemicals such as record sprays, household cleaners or thinner to clean compact
discs. Such chemicals can irreparably damage the disc's surface.
Discs should be kept in their storage cases when not in use.
Do not expose discs to direct sunlight, high temperatures or high humidity for extended periods.
Do not stick paper, tape, or labels on the disc surfaces nor write on them with any type of marker.
2) Discs with non-standard shapes (e.g.: heart, square, star) cannot be played on this unit. Attempting
to do so may damage the unit. Do not use such discs.
3) Before playing, clean the discs with a commercially available cleaning cloth. Wipe each disc from
the cente
r
out. Do not use solvents such as benzine, thinner, commercially available cleaners, o
r
antistatic spray intended for analog discs.
4) Some UDF CD-Rs/CD-RWs may have longer reading time.
5) Some CD-Rs/CD-RWs (depending on the equipment used for its recording or the condition of the
disc) may not play on this unit.
6) MP3 CD-Rs/CD-RWs (depending on the recording method of the disc) may have some difference
on sound level.
14
If a problem should develop while operating the CD player, the following error codes may be
displayed on the LCD.
LCD DISPLAY FOR CD PLAYER ERROR
LCD SYMBOL ERROR DESCRIPTION
ERROR 1 LOAD Loading is not available.
ERROR 2 MECHANISM Mechanism problem.
ERROR 3 FAULT Mechanism fault.
ERROR 4 SERVO Servo error.
CD ERROR CD DISC / CD DATE Disc error. / Disc data error.
15
Your KIA MP3/WMA CD Player is guaranteed against defective parts and workmanship for a period of
three years from the date of vehicle Registration.
MP3/WMA CD Player supports for MP3 CD of Joliet, ISO9660 and UDF File Format.
In
the
event
your
MP
3
/WMA
CD
Player
is
faulty,
please
take
your
KIA
vehicle
to
your
nearest
KIA
PRODUCT AND WARRANTY SERVICE
In
the
event
your
MP
3
/WMA
CD
Player
is
faulty,
please
take
your
KIA
vehicle
to
your
nearest
KIA
dealer for their diagnostic inspection of your MP3/WMA CD Player.
If proven defective, your KIA dealer will implement a change over product service to replace your
faulty MP3/WMA CD Player.
This product guarantee does not cover damage to your MP3/WMA CD Player (with CD, MP3/WMA
and TUNER) if it has been subjected to misuse or abuse.
A fee to extend warranty service to any unit that has been misused or abused will be applied prior to
any service work carried out.
This guarantee does not cover any call for warranty service or change over product service if it is
recognized that your complaint is caused by your use of damaged, faulty CD Discs or imperfect CD-R
and CD-RW discs.
16
This car audio set plays compact discs containing MP3 files.
MP3 is an abbreviation of Motion Picture Experts Group (MPEG) Audio layer 3. MP3 audio format
files are only 1/10th the size of conventional CD audio files. Most MP3 files are created on a personal
Com
p
ute
r
usin
g
s
p
ecial software. Additional text information such as track TITLE
,
ARTIST and
MP3/WMA INFORMATION AND NOTICE
p
g
p
,
ALBUM included in the audio track can be displayed on the car audio set. Sound quality of MP3 files
varies depending on the settings used when the file was created. Your KIA car audio set plays most
MP3 files.
This car audio set plays compact discs containing WMA files.
WMA is an abbreviation of Windows Media Audio, an audio format developed by Microsoft
Corporation. WMA is similar to MP3 with respect to size, sound quality and text display. WMA files
are created using the Windows Media Player on a personal computer. Your KIA audio set plays most
WMA files.
NOTES for MP3/WMA playback:
- The elapsed playing time on the audio set's display may not be correct when playing MP3 files
encoded with variable bit rate (VBR).
- MP3 and WMA files encoded at bite rates lower than 128 KB/s will provide lower sound quality
compared to conventional CD audio tracks.
- MP3 and WMA files with digital rights management* (DRM) activated cannot be played on this car
audio set.
For technical information, see the following page in this manual titled 'SPECIFICATIONS'.
To disable DRM, locate the 'Protect Content' settings in your MP3/WMA encoding software and re-
encode the audio tracks. Copyright may exist on some audio program material; MP3/WMA files
are used at your own responsibility.
17
1) WARNING
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate
radio
frequency
energy
and,
if
not
installed
and
used
in
accordance
with
the
instructions,
WARNING AND PRECAUTIONS
radiate
radio
frequency
energy
and,
if
not
installed
and
used
in
accordance
with
the
instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
You are cautioned that any changes or modifications not expressly approved in this manual could
void your authority to operated this equipment.
2) PRECAUTIONS
When the inside of the car is very cold and the player is used soon after switching on the heater
moisture may form on the disc or the optical parts of the player and proper playback may not be
possible. If moisture forms on the optical parts of the player, do not use the player for about one
hour. The condensation will disappear naturally allowing normal operation.
18
Output Power -------------------------------------------------------------- 180 watts (4 x 45 Watts)
Tuning Range -------------------------------------------------------------- AM : 522 ~ 1,620 KHz. 9 KHz. Steps
FM : 87.5 ~ 108.0 MHz. 100 KHz. steps
SPECIFICATIONS
Sensitivity ------------------------------------------------------------------ AM : 15
FM : 1.5
FM Stereo Separation --------------------------------------------------- 30 dB
CD Frequency Response ---------------------------------------------- 20 ~ 20,000 Hz
CD S/N Ratio -------------------------------------------------------------- 60 dB
CD Channel Separation ------------------------------------------------ 40 dB
CD Audio Format --------------------------------------------------------- Red Book (IEC 908)
Logical File Format ------------------------------------------------------- ISO 9660 (level 1,2 & 3), Joliet
UDF (1.02, 1.50, 2.00/2.01, 2.50/2.60)
Usable Sampling and Bit Rates -------------------------------------- MP3: Sampling rate 44.1 KHz,
Bit rate 32-320 KB/s with VBR
WMA: Bit rate 48-192 KB/s
ID3 Tags -------------------------------------------------------------------- ID3v1, ID3v2
AUX I t S iti it
2V ( VOLUME STEP 20 )
AUX
I
npu
t
S
ens
iti
v
it
y ----------------------------------------------------
2V
(
VOLUME
STEP
20
)
400 and 800 mV @ 10 K Ohm
19
P/N: 6350200008
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20

KIA K200SO-A User manual

Category
Car media receivers
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI