INSTRUCTION
MANUAL
MP3-02
MP3 CD
PLAYER
WITH AM/FM
RADIO
Before
operatirg
the
unit,
please
read
this
manual
thoroughly
and retain
it
for
future
reference
1.
OPERATING
INSTRUCTIONS
page
03
2.
CENERAL--------------
Pase
04
3. ANTI-THEFT
SECURITY
CODE
page
08
4. RADIO
page
10
5.
CD
PLAYER
-----------
Page
13
6. CELLULAR
TELEPHONE
MUTE
FEATURE
paee
19
7.
HANDLING
COMPACT
DISCS
page
20
8. LCDDISPLAYFORCDPLAYERERROR
paze21
9. PRODUCT
AND WARRANTY
SERVICE
page
22
10. MP3/WMA
INFORMATION
AND
NOTICE
-----------
pase23
11.
SPECIFICATIONS
pase2l
(1r)
C O
t6,r
'r4)
O
i1r
PowER
oN/oFF BUTToN
Press
OFF button
l,to
turn the unit on or off
for less
than
five
seconrls.
When the
power
is
on, the previous mode
(last memorv)
will appear.
(1)
INITIAL
VoLUME LEVEL SET UP
Press the
OFF button
loneer
than 5 seconds.
The
current volume levefis stored as the volume
level when MP3
plaver
is
next turned
on.
rD
voLUME
uP / DowN coNTRoL
Turn Audio
Sound button
2
rieht to
increase
the volume
level. The Level
will
be shown in
"
VOLUME xx" on the display panel.
Turn left
to
decrease the Volume level. After
5 seconds of
volume indication, display
will return to the previous mode.
azr
-
(1)
SOUND
FUNCTION
SELECTION
(AUDIO
SOUND)
This button
t-?
is
to adjust the sound. Each time you momentarily
press button
€r,
LCD displays each
mode
as
follows
When this button is
pressed, LCD display shows selected function
for 5 seconds and then returns back to the previous
mode.
On selected
function, level
can be controlled by turning this
button. The dispiay will automatically return
to normal indication
in
5 seconds after the last adiustment is made
or
when
another function is activated.
:
-
(2)BASS
CONTROL
To
adjust the Bass level, first select the Bass mode by pressing the Sound
button : until
"BASS"
indication appears on the display panel. Within 5
seconds
of choosing the
Bass mode, turn right/left to adjust the bass level
as desired. The
bass
level
will be shown on the display
panel from
a
$rinimum
of
"BASS
-10"
to a
maximum
of
"BASS
+10".
The displav will
automaticallv return
to the
normal indication in
5 seconds aftei the
last
adiustment or when another function is activated.
.2
i2r-
(3) TREBLE
coNTRoL
To adjust the Treble level,
first seleci the Treble mode
by pressing the Select button
(2
until
"TREBLE"
appears on the
display panel. Within 5 seconds of choosing
the
Treble
mode, turn right/left adjust the treble response as desired.
The treble levei will be shown
on
the
display panel from a minimum
of
"TREBLE
10"
to a
maximum
of
"TREBLE
10".
The display will automatically return
to the normal indication in
5 seconds after the
last
adjustment or
when
another
function is
activated.
€)-
(4)
BALANCE
CONTROL
To adjust the left-dght
speaker balance, first select the Balance mode
by
pressing
the Sound button
(D
until the
"BAL"
indication appears oir the display
panel. Within 5 seconds
of choosing the
Balance mode,
turn
right/left to
adjust
the balance
as desired.
The balance position will be shown
by the bars on the display panel from
"BAL
10l"(full left)
to
"BAL
10R"(fu11 dght).
When the volume level
between the left and right
speakers is equa1,
"BAL
L=R" will be
shown on
the display
pane1.
The display will automatically
return to the normal indication in
5 seconds after the last adjustment or when another
function is activated.
o-
(5)FADER
CONTROL
To adjust
the
front-rear
speaker balance,
first
select
the Fader mode by
pressing
the Sound button
(D
until the
"FADER"
indication appears
on
the
display
panel.
Within
5 seconds of choosing the
Fader mode, turn right/left to adjust the
front-
rear speaker level as desired.
The fader position will be
shown
by the bars
on
the display panel from
"FADER
10F" (full front) to
"FADER
10R"(full rear). When the volume
level between
the
front
and
rear
speaker
is
equal,
"FADER
F= R" will be
shown on the display panel. The display will automatically return to the
normal
indication in 5 seconds after the last adjustment or when another
function is activated.
e)
2
-
(6)
BEEP
CONTROL
To
adjust
the Beep mode, first
select the Beep mode by pressing
the Sound button O until
"BEEP"
indication appears
on
the
display panel.
The Beep mode
will be shown
on
the
display panel from
"BEEP
2ND",
"BEEP
OFF"
and
"BEEP
ON".
The
display
will
automatically return to the normal indication
in 5 seconds after the last adjustment or when another
function is
activated. Select
"BEEP
ON" when you wish to hear the
"BEEP"
sound whenever any function button
is
pressed.
Select
"BEEP
2ND" when
you wish to hear the
"BEEP"
sound whenever any
Tuner Pre-set
button
and/or Tune Seek buttons
are
pressed for more
than 3 seconds.
o
I.J)
MODE BUTTON
Press MODE button
O
to select
CD
Player
or Radio.
I4AUDIO
MUTE
BUTTON
(MUTE)
Press
Mute button
@-l
momentarily
to mute volume
and
"MUTE"
mark will
blink on the
LCD
panel.
Press
the button again
to
return
to the mode
in use before the
Mute mode was activated.
6)
LOUDNESS
CONTROL
(LOUD)
When listening to music
at
low
volume levels,
this feature will boost
the bass and treble response.
This
action will compensate for
the reduction in
bass and treble performance
experienced at low volume.
Press
Loud button
6
to
activate this feature. This
"LOUD"
mark wili
be
indicated
on the display pane1. Pressing the
button again will de-activate
the function
and
"LOUD"
mark
will disappear from the display panel.
e@)
6)
ANTI-THEFT-DETERRENT
PIN LED
This LED lamp blinks every
1 second when the
unit is turned off.
(:)
ANTI-THEFT SECURITY
PIN
CODE
INPUT
To activate the security
pin
code,
please follow these steps.
1. Turn
on
your stereo.
2. If the stereo screen
indicates
"1
CDE", this
is a message that you
need
enter your anti-theft security
pin code.
@
3.
Your security pin code number can be
found
on
the card
supplied
with your new
Hyundai vehicle.
4.
Every Hyundai stereo has its own individual antitheft security
pin code. Entering an
incorrect pin code or
using
incorrect procedures will not activate your stereo
to an
operational
status.
5. Your anti-theft pin
code is made up of four computer-generated
numbers.
6.
An example pin code may be 3212.
7. To enter
pin
code 3212
into your stereo, always follow these steps,
a.
Press Pre-set button number one
(1),
three
(3)
times.
b. Press
Pre-set
button
number two
(2),
two
(2)
times.
c. Press
Pre-set button nurnber three
(3),
one
(1)
time.
d. Press Pre-set button
number four (4), two
(2)
times.
e. Check
that the pin code shown on your stereo screenis
"3272".
f.
Press Pre-set button number five
(5)
once to activate the pin code.
Your
Stereo
is now
readied for full
operation.
B.
Another
example pin code number is 7963.
9. To enter pin code 7963 into your
stereo, always
follow
these steps,
a. Press Pre-set button number one
(1),
seven
(7)
times.
b. Press Pre-set button number two
(2),
nine
(9)
times.
c. Press Pre-set button number
three
(3),
six
(6)
times.
d. Press Pre-set button number four
(4),
three
(3)
times.
e. Check that the pin code shown
on your stereo screen
is
"7963"
.
f. Press Pre-set button number five
(5)
once to activate the pin code.
10. Important
: If you have entered the incorrect anti-theft
pin
code
or
used an incorrect
procedure
at your first attempt,
your stereo screen will exhibit the following
message
"2
CDE" . This means you
need
enter the
pin code a second time
taking care
to fo'llow
these instructions and enter the correct pin code.
11. if
the stereo screen show the message
"3
CDE", this means you failed to follow the correct instructions or that
you
entered the incorrect pin code.
12. If you fail to succeed to enter the correct
pin code at the third attempt, your stereo will
turn
off.
You will need to wait at
least one hour before attempting to re-enter
the correct anti{heft security pin code number using
the above procedures
correctly.
Your H).undai
stereo
has the
anti-theft securitv pin code entered into it prior to you collecting your new Hyrndai car.
The on\z time
)uour
stereo
will identi$r
the message
"1
CDE" in the screen is if your stereo or car has lost battery power.
If
Jrour
car battery is in good order. your stereo will
accept
)rour
anti-theft security pin code
number
using
the above procedure.
If you experience a failure to
operate your stereo after canying
out
the above procedure,
Please visit a Hlrundai Dealer for
additional assistance.
Please
do
not
leave your card containing
your
anti-theft
security pin code number in your car.
Keep your card featuring your
pin code number in a safe secure place.
Ul
AM/FM BAND
SELECTOR
(BAND)
Each time
Band
button
(9
is
pressed,
the radio band is
changed.
I ,r. h time this button is
presied,
LCD
displays each band aifollo*t.
FM1
-
FM2-FM3
*AM
UP/DOWNTUNING(
,V)
To automatically select a radio station, momentarily
press the Up
TUNE
SEEK button
(
A
)
or Down
TUNE SEEK
L.utton
(
\l )
for less than
3 seconds to search for the closest radio station.
i,, nranually select a radio station in either
(FM:50Klfz,
AM:9KHz),
press the Up
Tuning
&
Down Tuning button
ror longer than 3 seconds. The radio frequency will move
up or down step by step each time
1'ou
press button iO.
ai^l
(10
PRE-SET
SCAN
(PS)
/
BEST
STATION MEMORY
(BSM)
BUTTON
[0-
(1)
PRE-SEr
SCAN
(PS)
Press BSM button
[-0 momentarily to
scan the 6 pre-set
station stored the memories on the AM bands or the 18 pre-set
stations stored the memories
on the FM bands. The
unit will stop at each
pre-set
station
(the pre-set
number
on the
display
panel will flash during
pre-set scan operation)
and re'main on ihe selected frequency. Press
the button
momentarily
again to remain
on the station currently
being heard.
(O- (2)
BEST
STATION MEMORY
(BSM)
Pressing BSM
button
@
for longer
than 2 seconds will
activate the BSM tuning feature
which will automatically scan
and
enter each station into memory.
If you have
already set the pre-set memories
to your favorite stations, activating
the BSM
tuning feature will
erase those stations
and enter the new
ones.
This BSM feature
is most useful when
traveling in a new area
where you are not familiar
with the local
stations.
@
LOCAL-DISTANCE
CONTROL
(LOC/DX)
Pressing LOC/DX
button
(LOC)
momentariiy
will
select only local strong
stations
in
station search mode.
In
"non"
LOC mode
(DX),
your radio will
search for both local
strong and distant weaker stations.
If
you choose local
seek
(LOC)
sensitivity,
the display will
show
"LOC"
on the LCD
panel.
11
(D
@@
(9@
@
@-@)
STATION PRE-SET
BUTTON
Pressing these
buttons less than 2
seconds will recall your favorite pre-set
radio
stations.
To
store your favorite
stations into any of the 6 pre-set memories in
either the
AM or FM band,
use the following procedure:
a. Turn
the radio on and
select
the
desired band.
b.Select
the first station
to be pre-set using the Manual UP/DOWN
or
Automatic
Seek Tuning
Control
@.
c. Press
the chosen pre-set
button to store your selected station into and
continue to hold it in. The
Beep sound will be momentarily heard and
the
pre-set number will
appear on the display panel indicating that the
station
is
now
set into pre-set memory position
and can be recalled at any time, by
pressing
that pre-set button.
t2
19,'
g]
TRACK
SELECTION &CUE
/REVIEW
BUTTON
E-
(I)TRACK
SELECT FUNCTION
This button
€)is
used to
select
track up/down. Each time the
Forward Track
select
(
A
)
is pressed, track
number is increased.
Each time the Backward Track
select
(
V
)
is pressed, track
number is decreased.
.9J
-
(2)CUE/REVIEW
FUNCTIONS
High-speed
audible search of any track on a disc can
be made
by
this button
Q)(the
Cue and Review functions).
Press
and
hold
the Cue button
(
A
)to
advance
rapidly in
the
forward
direction or the Reviewbutton
(
\l)
to advance
rapidly in
the backward direction.
Note : In case of playing MP3 disc, you can search the file
in
Cue
and
Review
with
Audio (not
audible).
Play
Cue and
Review
within a
located file(song)
and
play
sounds
automatically
at
the first selection of a file.
?MP3
DIRECTORY/FILE
SEARCHING
This button
@
is
used to select a particular directory
and file. Press and hold for more than 2 seconds while playing MP3 disc
Turn right/left this button
(D
to
search the directory. Press the button
when
you find
the wanted directory.
For example, the directory
search generally changes in
two
methods
depending on the order of writing as follows.
ia
Method 1 :
Method 2 :
ROOT
-Dir01
-Dir02
+Dir03 +Dir04;Dii05 ;Difi6 +Dir07
al
ROOT
'
DirOl
'
Dir02
'
Dir05
,
Dir03
>
Dir05
'Dr04
'
Dir07
13
It
you
want
to search
the file in the
located directory,
turn right/left
this
button
@
consecutively'
press
the button
when
you find the
wanted file.
The unit will then
play the
selected
fi1e.
For instance,
the
file search changes
in
Dir01 as follows.
File01
,FileO2
*File03
*Fi1e04
MP3 directory/
file configuration
ROOT
I
Directory0l
File01
Fi1e02
Fi1e03 File04
Dir02
-]-
ttl
File05
File06
Dir05
Dir03
r---f--__-r
File07
File08
Dir06
Dir04
r-----|---r
File09
File10
Dir07
rT6]
DIRECTORY DOWN
Press
'D
-
"button
{d
briefly while playing
MP3
disc.
The previous directory is located each time you press this button
@.
.O DIRECTORY
UP
Press
'D
+
"
button
{?briefly
while
playing
MP3
disc.
The next directory is located
each time you press this button
@t.
Note
.
If the MP3
disc does
not have
a directory, this unit play MP3 disc
at
10-file intervals
whenever this button is pressed.
.
If your
disc does
not
contain any MP3
fi1e,
this button cannot
oDerate.
.
If
the directory does not contain any MP3 files, it will be skipped.
'O(0
L_)
(1,
ID3 v2
DISPLAY
Disp button
(Dis
used
to change
the display
information'
While playing
an MP3
file,
you can
change
the
file information
shown
on
the display.
Each time
yot-t pi"t.
DISP
(display), the
display
changes
to show
the
following.
Note
: If the
MP3 disc
does
not
have any
ID3
information,
the
display
will show"NO
ID3" on
LCD panel'
le name
(normal
mode)
I
/
performer
/
title
I
:r
/
elapsed
time
Directory
name
/
file
J
Album
name
/
J
Track number
f4l
[D
TRACK
SCAN
(SCN)
During disc play, press SCN button
@
to play the
first 10
seconds
of each track on
the whole file on the disc
("SCN"
mark will appear on the
display panel). When a
desired
track
is reached,
press
the
SCN
button again to cancel the function.
The
umt
will then play the selected track. Track Scan mode will also be
cancelled by
activating
the Track up/donm
@
or
Repeat
@.
Note : In case
of
playing MP3 disc, when the SCN button
is
pressed
and held
for longer than 2 seconds, the
"SCN "
mark will blink on the LCD panel
and all
files in
the selected
directory will be introduced until the
track
scan mode
is
cancelled
by pressing the SCN button again or by
activating the Random or Repeat functions.
(4
REPEAT PLAY SELECTOR
(RPT)
During
disc play,
press RPT button @to play the selected
track
(file)
repeatedly ("RPT" will appear on the display panel).
Play of the track will
continue to repeat until the button
is pressed again and the
"RPT
"
disappears
from the display panel. Repeat Play mode will
also be cancelled by activating
Scan
@
functions
or
Random Play
(i9
.
Note :
In
case of playing MP3 disc, when the RPT button is pressed and
held longer than 2 seconds, the
"RPT
"mark
will
blink on the
LCD
panel and play all files in the selected Directory
and will be repeated until the Directory
Repeat
mode is cancelled by pressing the Repeat button again or by activating the Scan or
Random functions
(
"RPT "
mark
will
disappear
from LCD
panel).
(19
RANDOM PLAY SELECTOR
(RDM)
During disc play, press RDM button
e
to play the tracks on the disc in a random shuffled
order
("RDM"
will appear on
the display panel). The Track select function
(!D
will also select track in the
Random
order
instead of the normal process.
The Random PIay mode can be cancelled by activating Scan
(0
functions or
Repeat Play
@.
Note
: In case
of
MP3 playing, when the Random button is pressed and held longer than
2
seconds,
the
"RDM"
mark
will blink
on
the LCD panel and play all files in Directory randomly until the
Directory Random mode is
cancelled by pressing the Random button again
or
by activating the Scan or Repeat
functions.
('RDM'
mark will
disappear from LCD
panel;.
t7
€i)
fh
(E)DISC
SLOT
With
the label surface facing up, gently insert the disc into the slot until the
soft loading mechanism
engages.
The
disc play begins. The Disc play track number will appear on the LCD.
Note
:
This
unit
is
designed for play of standard 5"
(12cm)
compact
disc ONLY. Do-not atteinpi to use 3"
(Scm)
CD-sinele discs
in this
unit, either with
or
with6ut
an adaptbr, a's
damag"e
to
the player
and/or disc can occur. Such damage will not be covered
by
the
warranty
on this product.
(ID
@
[9
Drsc EJECT
(
A
)
By pressing DISC EIECT
button
@,
the disc will
be ejected and the unit will return to
the
previous mode.
If
the disc is not removed from
the player after eject, your
disc or player may be accidentally damaged.
Play
of the disc can be resumed by using
the MODE selector
@
to
choose CD piayer function.
t8
n
This set has a
feature that will automatically
lower (mute) the volume of
the radio when
the vehicle's
cellular telephone
is
used
("an interface may be necessary
depending on the particular
telephone")
"TEL
MUTE"
will appear on
the radio
display
panel during telephone
use.
For installation of
your mobile telephone kit to operate
this Mute feature,
you should refer
this installation
application
to
your Hyundai Dealer to ensure
you do not void waffanty
applications relating
to the vehicle or
your stereo.
t9
1) Dirt dusf scratches,
and disc warpage can cause skipping
in the play back and
deterioration of sound quaiity.
Please
observe
these guidelines to take
care
of your
compact discs
:
.
Fingerprints, dust and dirt should
be
carefully
wiped off the disc's playing
surface
(shiny
side)
with a soft cloth.
Wipe
in a
straight
motion from the
inside to the outside of the disc.
.Never
use chemicals such
as record sprays, household cleaners
or thinner to clean
compact discs. Such
chemicals can
irreparably damage
the disc's surface.
.
Discs should be kept
in
their storage
cases when not in use.
.
Do not expose discs to direct sunlight,
high temperatures or high
humidity for extended periods.
.
Do
not
stick
paper, tape, or labels on the disc surfaces
nor write on them
with any type of
marker.
2) Discs with non-standard shapes
(e.g.:
hear! square, star) cannot be played
on this unit.
Attempting to do so
may damage
the unit.
Do not use
such
discs.
3) Before
playing, clean the discs with a commercially
available cleaning cloth.
Wipe each disc from
the center out.
Do not use solvents such as
benzine, thinner, commercially available cleaners,
or antistatic spray
intended
for analog discs.
4) Some UDF CD-Rs/CD-RWs
may have
longer reading time.
5) Some CD-Rs/CD-RWs
(depending
on
the equipment used for its
recording or the condition of
the disc) may
not play on
this unit.
6)
MP3 CD-Rs
/
CD-RWs
(depending
on the recording method of the
disc) may have some difference
on sound
level.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
