Edimax SP-1101W User manual

I

SP-1101W

User Manual

11-2013 / v1.0

may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated

into any language or computer language, in any form or by any means, electronic,

mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written

permission from Edimax Technology Co., Ltd.

Edimax Technology Co., Ltd. makes no representations or warranties, either

expressed or implied, with respect to the contents hereof and specifically disclaims any

warranties, merchantability, or fitness for any particular purpose. Any software described

in this manual is sold or licensed as is. Should the programs prove defective following

their purchase, the buyer (and not this company, its distributor, or its dealer) assumes

the entire cost of all necessary servicing, repair, and any incidental or consequential

damages resulting from any defect in the software. Edimax Technology Co., Ltd. reserves

the right to revise this publication and to make changes from time to time in the contents

hereof without the obligation to notify any person of such revision or changes.

The product you have purchased and the setup screen may appear slightly different

from those shown in this QIG. For more information about this product, please refer to

the user manual on the CD-ROM. The software and specifications are subject to change

without notice. Please visit our website www.edimax.com for updates. All brand and

product names mentioned in this manual are trademarks and/or registered trademarks

of their respective holders.

Edimax Technology Co., Ltd.

Add: No. 3, Wu-Chuan 3rd Rd., Wu-Ku Industrial Park, New Taipei City, Taiwan

Tel: +886-2-77396888

Email: sales@edimax.com.tw

Notice According to GNU General Public License Version 2

Certain Edimax products include software code developed by third parties,

software code is subject to the GNU General Public License ("GPL") or GNU

Lesser General Public License ("LGPL"). Please see the GNU (www.gnu.org)

and LPGL(www.gnu.org) Websites to view the terms of each license.

The GPL Code and LGPL Code used in Edimax products are distributed without

any warranty and are subject to the copyrights of their authors. For details,

see the GPL Code and LGPL Code licenses. You can download the firmware-

files at http://www.edimax.com under "Download" page.

II

I. Product Information .............................................................................. 1

I-1. Package Contents ............................................................................... 1

I-2. Front Panel ........................................................................................ 1

I-3. LED Status .......................................................................................... 2

I-4. Switch Status Button ......................................................................... 2

I-5. Product Label ..................................................................................... 3

I-6. Reset .................................................................................................. 3

II. Hardware Installation ............................................................................ 4

III. Smart Plug Setup ................................................................................... 5

III-1 Download EdiPlug App ....................................................................... 5

III-2. Install a Smart Plug ............................................................................. 6

III-3 Change Smart Plug Name & Password ............................................. 10

III-4 Add an Existing Smart Plug to the Main Screen ................................ 12

III-5 Set the Schedule .............................................................................. 14

III-6. Notification ....................................................................................... 19

III-7 Delete Smart Plug from Main List ..................................................... 24

III-8 Reset to Default ................................................................................ 25

III-9 Upgrade Firmware ............................................................................ 27

1

I. Product Information

I-1. Package Contents

I-2. Front Panel

Network LED

Power LED

Switch Status Button & LED

Reset Button

Smart Plug Switch

Quick Installation Guide

CD with User Manual

2

I-3. LED Status

After setup, the network LED must display on and green in

order for the EdiPlug app to function remotely i.e. from a

different Internet connection to your smart plug.

I-4. Switch Status Button

The switch status button, located on the front of your smart plug (see I-2.),

switches on/off your smart plug’s output power socket. You can switch any

device connected to your smart plug on or off with this button. The button

will light up green to indicate on (see I-3).

LED

Color

Status

Description

Switch

Status

Green

On

Smart plug output power socket is on.

Off

Smart plug output power socket is off.

Power

Green

On

Smart plug is powered on.

Off

Smart plug is off.

Network

Red

Quick Flashing

Smart plug is starting up or restarting.

Slow Flashing (1

x per second)

Smart plug is in installation mode and

ready for setup.

Green

On

Smart plug is connected to wireless

network and cloud.

Slow Flashing (1

x per second)

Smart plug is connected to wireless

network but not cloud.

Off

No network connection.

3

I-5. Product Label

The product label, which is located on the back of the smart plug switch,

displays the input/output power and the default password of your smart plug.

The password should be changed when you have finished the installation

process for security purposes. The password is required to access the smart

plug switch remotely.

I-6. Reset

If you experience problems with your smart plug, you can reset the plug back

to its factory default settings. This resets all settings, including the smart

plug’s password, back to default.

1. Press and hold the reset button found on

the front of the plug for at least 10 seconds

2. Release the button when the network LED

is flashing quickly red.

3. Wait for the smart plug to restart. The

smart plug is ready when the network LED is

flashing slowly red to indicate installation

mode.

4

II. Hardware Installation

Follow the instructions below to ensure your smart plug is properly connected

and ready for setup.

If you have multiple smart plugs to set up, please only plug

in and set up one smart plug at a time.

1. Plug the smart plug into a power socket.

2. Wait a few moments for the smart plug to start up. The smart plug is ready

for setup when the network LED is flashing slowly red to indicate

installation mode.

If your smart plug’s network LED does not indicate

installation mode, try resetting the smart plug (see I-6).

3. When you see the smart plug’s network LED indicate installation mode,

please continue to III. Smart Plug Setup to set up your smart plug using

the free EdiPlug smartphone app.

5

III. Smart Plug Setup

III-1 Download EdiPlug App

To set up your smart plug with the free EdiPlug smartphone app, please

download the EdiPlug app and then follow the setup instructions for iOS or

Android. After setup, you can use the EdiPlug app to switch your smart plug

switch on/off remotely from any smartphone with an Internet connection, as

well as set up automated schedule and email notifications.

1. Search the Apple App Store or Google Play for “EdiPlug”.

2. Download and install the app.

3. Follow the appropriate instructions below for iOS or Android.

6

III-2. Install a Smart Plug

 iOS

Follow the instructions below to add a new smart plug to the EdiPlug app on

iOS:

You must be within Wi-Fi range of the smart plug. If you

have multiple smart plugs, please only plug in and set up

one plug at a time.

1. Search for a Wi-Fi network named “EdiPlug.Setup” and connect to it, as

shown below:

2. Open the EdiPlug app and select your Wi-Fi network from the list, as

shown below:

7

3. Enter your Wi-Fi password and tap “OK”. The next screen will indicate that

setup is complete!

4. Your smart plug will now be displayed on the EdiPlug main screen. Slide

the switch to switch the your smart plug (and any electrical device you plug

into it) on or off.

5. The smart plug’s network LED should display on and green to indicate a

successful network and cloud connection. You can use the EdiPlug app to

control your smart plug remotely from any Internet connection.

8

 Android

Follow the instructions below to add a new smart plug to the EdiPlug app on

Android:

You must be within Wi-Fi range of the smart plug. If you

have multiple smart plugs, please only plug in and set up

one plug at a time.

1. Open the EdiPlug app and click the “+” icon in the top-right corner of the

screen.

2. Tap “Install a New Plug” and select your Wi-Fi network from the list, as

shown below.

9

3. Enter your Wi-Fi password and tap “OK”. The next screen will indicate that

setup is complete!

4. Your smart plug will now be displayed on the EdiPlug main screen. Slide

the switch to switch your smart plug (and any electrical device you plug

into it) on or off.

5. The smart plug’s network LED should display on and green to indicate a

successful network and cloud connection. You can use the EdiPlug app to

control your smart plug remotely from any Internet connection.

10

III-3 Change Smart Plug Name & Password

 iOS

1. Select “Edit” from the EdiPlug main screen and then select the smart plug

which you wish to edit from the list.

2. Enter a new name and password for your smart plug and tap “Back” to go

back to the main screen. Your smart plug will now be displayed under its

new name.

11

 Android

1. Select “Edit” from the EdiPlug main screen and then select the smart plug

which you wish to edit from the list.

2. Enter a new name and password for your smart plug and tap “Back” to go

back to the main screen. Your smart plug will now be displayed under its

new name.

12

III-4 Add an Existing Smart Plug to the Main Screen

 iOS

1. From the EdiPlug main screen, click the “+” icon in the top-right corner and

select a plug from the list.

2. Enter your smart plug password and tap “OK”. Click “Back” icon on the

next screen to finish.

13

 Android

1. From the EdiPlug main screen, click the “+” icon in the top-right corner and

select a plug from the list.

2. Enter your smart plug password and tap “OK”. Click “Back” on the next

screen to finish.

14

III-5 Set the Schedule

 iOS

1. Select “Edit” from the EdiPlug main screen and then choose the device

that you wish to edit. Press “>” to enter the detail settings.

2. Select “Schedule” and then able or disable the control functions by sliding

the button to blue or white. Press “>”on the right of the screen if you want

to edit the schedule for that day.

z

15

3. On the edit schedule page, areas in gray indicate the switch is “off”, areas

in yellow indicate the switch is “on”. Slide arrows right on the time bar to

select switch “on” period and left to select switch “off” period. Touch the

yellow or gray area to adjust functions at that time. Press “Done” to save

settings and go back to previous page.

4. On the editing detail period page, areas in gray indicate the switch is “off”,

areas in yellow indicate the switch is “on”. Slide arrows right to switch “on”

and left to switch “off”. Swipe where the red arrows are below to go to

next or previous hour period. Press “Done” to save settings and go back to

previous page.

16

5. Press the time bar, as shown in the left picture, to show the detail

schedule settings which have been set as shown in the right picture.

 Android

1. Select “Edit” from the EdiPlug main screen and then choose the device

that you wish to edit. Press “>” to enter the detail settings.

17

2. Select “Schedule” and then able or disable the control functions by sliding

the button to blue or white. Press “>”on the right of the screen if you want

to edit the schedule for that day.

On the edit schedule page, areas in gray indicate the switch is “off”,

areas in yellow indicate the switch is “on”. Slide arrows right on the

time bar to switch “on” and left to switch “off”. Touch the yellow or

gray area to adjust functions at that time. Press “Done” to save settings

and go back to previous page.

Page is loading ...

Edimax SP-1101W User manual

Edimax SP-1101W User manual

Related papers

Other documents