Edimax SP-2101W User manual

Brand: Edimax

Model: SP-2101W

Type: User manual

Edimax SP-2101W is a smart plug that allows you to control your home appliances from anywhere using your smartphone. It features a power meter that tracks energy consumption, a scheduling function for automating your devices, and email notifications for power usage alerts. You can also set power and cost budgets to help you save energy and money. The Edimax SP-2101W is easy to set up and use, and it's compatible with both iOS and Android devices.

SP-2101W

User Manual

07-2014 / v1.0

I. Product Information .............................................................................. 4

I-1. Package Contents ............................................................................................ 5

I-2. Front Panel ..................................................................................................... 5

I-3. LED Status ....................................................................................................... 6

I-4. Switch Status Button ....................................................................................... 6

I-5. Product Label .................................................................................................. 7

I-6. Reset ............................................................................................................... 7

II. Hardware Installation ............................................................................ 8

III. Smart Plug Quick Setup ......................................................................... 9

III-1. iOS ................................................................................................................ 10

III-1-1. Change Smart Plug Name & Password .......................................................... 12

III-1-2. Add an Existing Smart Plug to the Main Screen ............................................ 13

III-1-3. Power Meter: Main Screen ........................................................................... 14

III-1-4. Settings ......................................................................................................... 15

III-2. Android ......................................................................................................... 16

III-2-1. Add a new smart plug ................................................................................... 16

III-2-2. Change Smart Plug Name & Password .......................................................... 19

III-2-3. Add an Existing Smart Plug to the Main Screen ............................................ 20

III-2-4. Power Meter: Main Screen ........................................................................... 21

III-2-5. Settings ......................................................................................................... 22

IV. EdiPlug App .......................................................................................... 23

IV-2. App ............................................................................................................... 23

IV-2-1. Power Meter: Main Screen ........................................................................... 25

IV-2-1-1. Now ...................................................................................................... 26

IV-2-1-2. Usage ................................................................................................... 27

IV-2-1-3. Schedule ............................................................................................... 29

IV-2-2. Edit Settings .......................................................................................... 31

IV-2-2-1. Name .................................................................................................... 32

IV-2-2-2. Password .............................................................................................. 33

IV-2-2-3. Schedule ............................................................................................... 34

IV-2-2-4. Budget Control ..................................................................................... 36

IV-2-2-4-1. Daily, Weekly & Monthly Control ......................................................... 37

IV-2-2-4-2. Current Usage Control .......................................................................... 38

IV-2-2-4-1. Power Prices ......................................................................................... 39

IV-2-2-5. Email Notifications ............................................................................... 40

IV-2-2-6. Advance ................................................................................................ 41

IV-2-2-7. Reset .................................................................................................... 42

I. Product Information

IMPORTANT SAFETY INFORMATION

In order to ensure the safe operation of the device and its users, please read and act in accordance with

the following safety instructions:

WARNING: There is risk of fire or electric shock if the device is used inappropriately.

If you experience problems with the device, please contact your dealer of purchase for help. Accidental

damage will void the warranty of the device.

1. The device must be used within its published power outlet rating.

2. The device is recommended for indoor use in a dry location only.

3. Do not place the device near steam releasing devices or heat sources.

4. Avoid exposure of the device to external heat sources, sunlight, dust, corrosive chemicals, steam,

liquids and moisture.

5. Handle the device with care. Do not drop the device or subject the device to unnecessary physical

shock.

6. There are no user-serviceable parts inside the device. If you experience problems with the device,

do not attempt to service the device yourself.

7. Unplug the device during extended periods of inactivity and during lightning storms.

8. Do not use the device to operate or control heat-emitting devices unattended.

9. The power socket/outlet should be easily accessible and located near to the device intended for

use with the product.

10. Do not stack multiple devices on the product.

I-1. Package Contents

I-2. Front Panel

Network LED

Power LED

Switch Status Button & LED

Reset Button

Smart Plug Switch

Quick Installation Guide

CD with User Manual

I-3. LED Status

After setup, the network LED must display on and green in order

for the EdiPlug app to function remotely i.e. from a different

Internet connection to your smart plug.

I-4. Switch Status Button

The switch status button, located on the front of your smart plug (see I-2.),

switches on/off your smart plug’s output power socket. You can switch any

device connected to your smart plug on or off with this button. The button

will light up green to indicate on (see I-3).

LED

Color

Status

Description

Switch

Status

Green

Smart plug output power socket is on.

Off

Smart plug output power socket is

off.

Power

Green

Smart plug is powered on.

Off

Smart plug is off.

Network

Red

Quick Flashing

Smart plug is starting up or restarting.

Slow Flashing (1

x per second)

Smart plug is in installation mode and

ready for setup.

Green

Smart plug is connected to wireless

network and cloud.

Slow Flashing (1

x per second)

Smart plug is connected to wireless

network but not cloud.

Orange

Flashing

Alert: Budget/power quota exceeded.

Off

No network connection.

I-5. Product Label

The product label, which is located on the back of the smart plug switch,

displays the input/output power and the default password of your smart plug.

The password should be changed when you have finished the installation

process for security purposes. The password is required to access the smart

plug switch remotely.

I-6. Reset

If you experience problems with your smart plug,

you can reset the plug back to its factory default

settings. This resets all settings, including the

smart plug’s password, back to default.

1. Press and hold the reset button found on the

front of the plug for at least 10 seconds

2. Release the button when the network LED is

flashing quickly red.

3. Wait for the smart plug to restart. The camera

is ready when the network LED is flashing

slowly red to indicate installation mode.

II. Hardware Installation

Follow the instructions below to ensure your smart plug is properly connected

and ready for setup.

If you have multiple smart plugs to set up, please only plug in and

set up one smart plug at a time.

1. Plug the smart plug into a power socket.

2. Wait a few moments for the smart plug to start up. The smart plug is ready

for setup when the network LED is flashing slowly red to indicate

installation mode.

If your smart plug’s network LED does not indicate installation

mode, try resetting the smart plug (see I-6).

3. When you see the smart plug’s network LED indicate installation mode,

please continue to III. Smart Plug Setup to set up your smart plug using

the free EdiPlug smartphone app.

III. Smart Plug Quick Setup

To set up your smart plug with the free EdiPlug smartphone app, please

download the EdiPlug app and then follow the setup instructions for iOS or

Android. After setup, you can use the EdiPlug app to switch your smart plug

switch on/off remotely from any smartphone with an Internet connection, as

well as set up automated schedule and email notifications.

1. Search the Apple App Store or Google Play for “EdiPlug”.

2. Download and install the app.

3. Follow the appropriate instructions below for iOS or Android.

III-1. iOS

Follow the instructions below to add a new smart plug to the EdiPlug app on

iOS:

You must be within Wi-Fi range of the smart plug. If you have

multiple smart plugs, please only plug in and set up one plug at a

time.

1. Search for a Wi-Fi network named “EdiPlug.Setup” and connect to it, as

shown below:

2. Open the EdiPlug app and select your Wi-Fi network from the list, as

shown below:

3. Enter your Wi-Fi password and tap “OK”, then wait a moment for your plug

to restart.

4. The next screen will indicate that setup is complete. Your smart plug will

now be displayed on the EdiPlug main screen. Tap the switch to switch your

smart plug (and any electrical device you plug into it) on or off.

5. The smart plug’s network LED should display on and green to indicate a

successful network and cloud connection. You can use the EdiPlug app to

control your smart plug remotely from any Internet connection.

III-1-1. Change Smart Plug Name & Password

1. Select “Edit” from the EdiPlug main screen and then select the smart plug

which you wish to edit from the list.

2. Enter a new name and password for your smart plug and then tap “Back”

to go back to the main screen. Your smart plug will now be displayed under

its new name.

Features such as scheduling budget control and email

notifications can also be set up in the “Plug Settings” menu.

III-1-2. Add an Existing Smart Plug to the Main Screen

1. From the EdiPlug main screen, click the “+” icon in the top-right corner and

select a plug from the list.

2. Enter your smart plug’s password and tap “OK”. Click the check icon by

your smart plug’s name on the next screen to finish.

The default password is 1234.

III-1-3. Power Meter: Main Screen

1. From the EdiPlug main screen, click on a smart plug and the power meter

display will open. Use the three icons to browse different categories of

further information. For more information, refer to the chapter IV. EdiPlug

App.

Features such as scheduling, budget control and email

notifications can be set up in the “Plug Settings” menu.

III-1-4. Settings

1. Select “Edit” from the EdiPlug main screen and then select the smart plug

which you wish to edit from the list.

2. You can configure your smart plug’s schedule, budget control, email

notifications are other settings from this menu. If you need help, please

refer to IV-2-2-3. Schedule.

III-2. Android

III-2-1. Add a new smart plug

Follow the instructions below to add a new smart plug to the EdiPlug app on

Android:

You must be within Wi-Fi range of the smart plug. If you have

multiple smart plugs, please only plug in and set up one plug at a

time.

1. Open the EdiPlug app and click the “+” icon in the top-right corner of the

screen.

2. Tap “Install a New Plug” and select your Wi-Fi network from the list, as

shown below.

3. Enter your Wi-Fi password and tap “OK”, then wait a moment for your plug

to restart.

4. The next screen will indicate that setup is complete. Click “Next” and your

smart plug will now be displayed on the EdiPlug main screen. Tap the

switch to switch your smart plug (and any electrical device you plug into it)

on or off.

5. The smart plug’s network LED should display on and green to indicate a

successful network and cloud connection. You can use the EdiPlug app to

control your smart plug remotely from any Internet connection.

III-2-2. Change Smart Plug Name & Password

1. Select “Edit” from the EdiPlug main screen and then select the smart plug

which you wish to edit from the list.

2. Enter a new name and password for your smart plug and tap “Back” to go

back to the main screen. Your smart plug will now be displayed under its

new name.

Features such as scheduling, budget control and email

notifications can also be set up in the “Plug Settings” menu.

III-2-3. Add an Existing Smart Plug to the Main Screen

1. From the EdiPlug main screen, click the “+” icon in the top-right corner and

select a plug from the list.

2. Enter your smart plug’s password and tap “OK”. Click the check icon by

your smart plug’s name on the next screen to finish.

The default password is 1234.

Page is loading ...

Edimax SP-2101W User manual

Edimax SP-2101W User manual

Edimax SP-2101W User manual

Related papers

Other documents