Roland TM-2 Owner's manual

Brand: Roland

Model: TM-2

Type: Owner's manual

Roland TM-2: Your Gateway to Dynamic Drumming

With the Roland TM-2, you've got a versatile trigger module that unlocks a world of expressive drumming possibilities. Connect your favorite pads and transform them into a powerful electronic drum kit. Unleash your creativity with a vast collection of sounds, including realistic drums, percussion, and even electronic tones. Jam along with your favorite tracks or create your own compositions using the intuitive sequencer.

Roland TM-2: Your Gateway to Dynamic Drumming

RT-30K

RT-30HR

About the RT-30’s “Noise Cancel” Function

If you are connecting an RT-30K or RT-30HR drum trigger to your TM-2, you can use the Noise Cancel function.

Noise Cancel is a function that prevents the drum trigger from being unintentionally triggered by a sound of drum on

which the drum trigger is not mounted, or by sound or vibration from an external source.

* This function is only eective when you connect the RT-30K or RT-30HR to the TM-2 using a Roland recommended

stereo connection cable.

* The RT-30H does not support the Noise Cancel function.

* Noise Cancel function does not work if the Input setting is set to “Padx2.” To activate the Noise Cancel function, set the

Input setting to “HEAD&RIM.”

Adjusting the Noise Cancel function

Normally, if you select the correct trigger types for the connected triggers (“RT-30K” or “RT-30HR”) on your TM-2, the

optimum Noise Cancel value is automatically selected.

Raising the TM-2’s “Noise Cancel” parameter value decreases the possibility of unintentional triggering.

Please note that increasing the value of “Noise Cancel” parameter can also reduce the module’s response to intentional,

low velocity ghost notes.

Therefore, when adjusting this parameter, please choose the lowest possible value that both eliminates unwanted false triggering whilst still allowing

dynamic playing.