Triton Systems RL2000 Series Owner's manual

Type
Owner's manual

This manual is also suitable for

Page1of3
TDN0710300233
SynchronizingtheSecurityModule
totheMainboard
TDN0710300233December12,2013
Corporate Headquarters
21405 B Street
Long Beach, MS 39560
Phone: (800) 259-6672
Fax: (228) 868-9445
COPYRIGHT NOTICE
© 2013 Triton. All Rights Reserved. TRITON logo is a
registered trademark of Triton Systems of Delaware, LLC
Ensure the most up-to-date software is installed
on the unit BEFORE proceeding.
Page2of3
TDN0710300233
MiniMech,SDD,NMD50,NMD100,SCDU,HCDU
ToolsNeeded:
Smallpaperclip(straightenedout)
Step1Opentheupper cabinetandpoweruptheunitbyflippingthepowerswitchontheunit’spower
supplytotheONposition (I).
Step2Pressandholdthe“blank”keyonthekeypadandthenpressthe“1”key.
Step3Enteryourpasswordtologin
toManagementFunctionsandpressEnter.
Step4Ifapplicable,press“0”tonavigatetotheMainMenupage.
Step5OntheMainMenupage,press“2”Diagnostics.
Step6OntheTerminalDiagnosticspage,press“4”Dispenser.
Step7OntheCashDispenserDiagno
sticspage,press“7”Initialize Dispenser.
Step8PressENTERonthekeypadtoconfirmtheinitialization.
Step9Whentheconfirmationscreenappears,gentlyinsertandremovethepaperclipintothesecurity
module.


Step10PressENTERonthekeypad.
Step11Whenthe”Dispenserinitializeiscomplete”screenappears,pressENTERtoreturntotheCash
DispenserDiagnosticspage.
Step12Press“1”CashDispenserStatus.Reviewthestatusreporttoensurethe“SecurityModule
KeysSynchronized”states“Yes”.If“No
”,repeatSteps711.
Step13PressENTERonthekeypad3timestoexitoutofManagementFunctions.ReturntheATMto
customermode.
Page3of3
TDN0710300233
TDM
Step1‐Poweruptheunitbyflippingthepowerswitchontheunit’spowersupplytothe“ON”position.
Step2‐Whentheunitisfullypoweredup,pressandholdthe“blank”keyonthekeypadandthenpress
the“1”key.
Step3‐EnteryourpasswordtologintoManage
mentFunctionsandpressENTER.
Step4‐Ifapplicable,press“0”tonavigatetotheMainMenupage.
Step5‐OntheMainMenupage,press“2”Diagnostics.
Step6‐OntheTerminalDiagnosticspage,press“4”Dispenser.
Step7‐OntheCashDispenserDiagnosticspage,press“7”InitializeDispenser.
St
ep8‐PressENTERonthekeypadtoconfirmtheinitialization.
Step9‐Whentheconfirmationscreenappears,pressandreleasethebuttononthecassettepresent
sensorboard.
Step10‐PressENTERonthekeypad.
Step11‐Whenthe“Dispenserinitializeiscomplete”screenappears,pressENTERtoreturntotheCash
DispenserDiagnosticspage.
Step12‐Press“1”CashDispenserStatus.Reviewthestatusreporttoensure the“SecurityModuleKeys
Synchronized”states“Yes”.If“No”,repeatSteps711.
Step13‐PressENTERonthekeypad3timestoexitoutofManagementFunctions.ReturntheATMto
customermode.
  • Page 1 1
  • Page 2 2
  • Page 3 3

Triton Systems RL2000 Series Owner's manual

Type
Owner's manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI