Geovision GV-IO 12-in card V3 Installation guide

Brand: Geovision

Model: GV-IO 12-in card V3

Type: Installation guide

2013.12.23

With 12 digital inputs, the GV-IO 12-In Card is designed to work with the GV-NET/IO

Card to provide an interface for your external devices such as sensors and detectors.

Installation

Insert the GV-IO 12-In Card to an empty card slot. Connect the 20-Pin Ribbon Cable

to the GV Video Capture Card, the GV-IO 12-Out Card, and the GV-NET/IO Card as

shown below.

20-Pin Ribbon Cable (4 Connectors) x 1

GV-IO 12-In Card x 1

Packing List

ECE

GV Video Capture Card

Input 5

Input 6

Input 7

Input 8

Ground

OFF

Wet Contact

GV-IO 12-In Card

ECE

Dry Contact

20-pin Ribbon Cable

Connect to

GV-NET/IO Card and

GV-IO 12-Out Card

4-Pin to 4-Pin Mini Power Cable x 1

Input 13

Input 14

Input 15

Input 16

Ground

Input 9

Input 10

Input 11

Input 12

Ground

4-pin to 4-pin

Mini Power Cable

Installation Guide x 1

Specifications

All GV Video Capture Cards

Dry Contact

Input

Input Signal

Input

Environmental Conditions

0~50 Degree C / 32~122 Degree F

5%~95% (Non-Condensing)

Compatible Card

Models

Note:

1. Use of DIP Switch:

a. Use the switch for dry contact and 9-30V wet contact.

b. The card allows the use of mixing dry and wet contact devices

together. (Default Setting: Dry Contact)

c. The 12 inputs divided as four-in-one groups are related to the three

switches on the card for dry and wet contact.

2. To prevent the noise interference in I/O operation, tightly screw the

GV-IO 12-In Card to the PC case.

3. The GV-IO 12-In Card must work with the GV-NET/IO Card together.

Dimensions (W x H) 90 x 99 mm / 3.54 x 3.9 in

DC IN DC 5V, 1A

Wet Contact: 9~30V AC/DC

GV-IO 12-In Card V3

Geovision GV-IO 12-in card V3 Installation guide

Geovision GV-IO 12-in card V3 Installation guide

Geovision GV-IO 12-in card V3 Installation guide

Related papers

Other documents