Features
•
Compression molded from our exclusive solid Vikrell
®
material
•
Gentle sloping back, neck, and armrest in bath
design
•
Above-floor-drain (AFD) rough-in
•
Factory installed apron extension made of Vikrell
®
and injection molded undersupport structure
•
Durable high-gloss finish
•
10-year consumer/3-year commercial limited warranty
•
3″ (7.6 cm) wainscot/tile ledge
•
18-1/4″ (46.4 cm) bath depth (floor to top of
threshold)
•
60-1/4″ (153 cm) x 43-1/2″ (110.5 cm) x 22-1/4″
(56.5 cm) rough-in dimensions include flange
•
60″ (152.4 cm) x 42″ (106.7 cm) x 21-1/4″ (54 cm)
finished dimensions
Codes/Standards Applicable
Specified model meets or exceeds the following:
•
ANSI Z124.1.2
•
CSA B45
•
ASTM E162
•
ASTM E662
42″ (106.7 cm) AFD OVAL BATH
71111112
ALSO 71111122
Colors/Finishes
•
0: White
•
Other: Refer to Price Book for additional colors/finishes
Specified Model
Model Description Colors/Finishes
71111112 42″ (106.7 cm) AFD oval bath, left drain ❑ 0 ❑ Other_____
71111122 42″ (106.7 cm) AFD oval bath, right drain ❑ 0 ❑ Other_____
Model Access Panel Component Description Colors/Finishes
71111119 AFD bath only with access panel, left drain ❑ 0 ❑ Other_____
71111129 AFD bath only with access panel, right drain ❑ 0 ❑ Other_____
ENSEMBLETM
Page 1 of 2
1022712-4-
E
For more information
visit SterlingPlumbing.com
or call 1-800-STERLING
Technical Information
Fixture*:
Basin area:
Bathing well 40″ (101.6 cm) x 27″ (68.6 cm)
Top area 52″ (132.1 cm) x 35″ (88.9 cm)
To overflow:
Water depth 11″ (27.9 cm)
Capacity 55 gal (208.2 L)
* Approximate measurements for comparison only.
Model door maximum
width
door maximum
height
71111112
71111122
58-1/2″ (148.6 cm)* NA*
* Varies with alternative walls.
Installation Notes
Install this product according to the installation guide.
Size the drain hole clearance to fit the drain assembly that will
be used.
End stud positioning is critical if apron nailing-in flanges are to
be used.
Studs should be positioned roughly as shown.
3" (7.6 cm)
60" (152.4 cm)
3-1/2" (8.9 cm)
30" (76.2 cm)
1-1/2" (3.8 cm)
3-1/8" (7.9 cm)
6" (15.2 cm)
(Typical)
14"
(35.6 cm)
14"
(35.6 cm)
16"
(40.6 cm)
2" (5.1 cm) Minimum Drain
Hole Clearance Through Wall
27-1/2"
(69.9 cm)
4"
(10.2 cm)
8"
(20.3 cm)
11-1/2"
(29.2 cm)
20-1/4"
(51.4 cm)
2" (5.1 cm) D.
Drain
43-1/2"
(110.5 cm)
8-3/4"
(22.2 cm)
43-1/2"
(110.5 cm)
42"
(106.7 cm)
Overflow
Detail
21-1/4"
(54 cm)
22-1/4"
(56.5 cm)
3" (7.6 cm) Drain
Bottom to Floor
18-1/4"
(46.4 cm)
60-1/8" (152.7 cm) Min
60-1/4" (153 cm) Max
Product Diagram
ENSEMBLETM
ENSEMBLETM 42″ (106.7 cm) AFD OVAL BATH
Page2of2
1022712-4-
E
-
1
-
2
Sterling 7111L-5405SC-D-0 User manual
- Type
- User manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Sterling 72141110 User manual
-
-
Unbranded Hot Tub 71101122 User manual
-
-
-
-
-
-
-
Other documents
-
Sterling Plumbing 71110112 User manual
-
-
-
-
-
-
-
-
-