Westbrass D207H-07 Installation guide

Brand: Westbrass

Model: D207H-07

Type: Installation guide

Step 2 - Mount to Sink

Insert lines through 1 3/8” hole in sink or counter.

From underneath sink, slide

washer and

mounting nut over mounting

nipple.

Tighten the mounting nut to secure.

Do not over -tighten.

Step 3 - Connect to Hot Water Dispenser

Refer to tank installation instructions and illustration above

connect the line from the faucet to the rear corner inlet

tube on top of the tank.

Step 4 - Connecting to Cold Water Supply

Connect cold water suppl y . Refer to tank

instructions

for

WARRANT Y: Quick&Hot Faucets are warranted for 1 year

from the date of purchase.

Go to www.westbrass.com

call (213)

627-8441

for further details.

FAUCET INSTALLATION -

(D207/D2071)

Hose connector -

provided with this

faucet.

center outlet

tank

Tighten compression nut

to clamp fitting to tank

outlet tube.

Do not overtighten.

Faucet connection to center outlet of hot water tank

Clamp

White or

Clear Line

WARNING!

Direct faucet spout away from handle to avoid

serious burn.

2429 E Olympic Blvd. Los Angeles, CA 90021

Cold Water Supply

to Faucet 3/8” Comp.

Supply to Hot

Water Tank

- SERIES

Step 1 - Prepare Faucet

Undo nut and washer for under the sink.

Attach one side of Silicone tube to center outlet

using Hose clamp. Place a thin bead of silicone

around o-ring on base of faucet.

DO NOT PLUG IN TANK

the

installing the tank and powering it up.

Step 5 - Install Silicone Tube to Tank

See installation at right.

Connect to Hot

Water Tank (1/4 comp)

Connect to Cold

Water Inlet (3/8 comp)

Mounting Post &

Rubber Hose Inlet

Faucet Bottom View

Westbrass D207H-07 Installation guide

Westbrass D207H-07 Installation guide

Westbrass D207H-07 Installation guide

Related papers

Other documents