Westbrass D2035-NL-07 Installation guide

Brand: Westbrass

Model: D2035-NL-07

Type: Installation guide

This manual is also suitable for

M10 x 1.0

2-1/2”

3/8” Tubing adapter

3/8” x 1/4” Tubing Reducer

8”

2-3/8”

1-3/4”

2-1/8”

9”

1/2 ”

5-1/2”

D2035

Pure Water Faucet

For use with ﬁltration units.

Fits 3/8” or 1/4” PVC or

cop-

per tubing water supplies

1. Remove the mounting nut and

base washer from the faucet.

2. Seat O-ring in base groove.

If desired a thin bead of silicone

seal can be applied to the O-ring

for added sealing power. Please

do not use Plumber’s Putty.

3. Center the faucet in the mount-

ing hole and fasten with base

INSTALLATION

INSTRUCTIONS:

washer and mounting nut. Do not over tighten.

4. Determine whether your supply tubing is 1/4” or 3/8”. Make

sure the tubing end is free from burrs, or gouges and is cut

squarely.

5. For 3/8” thread the brass John Guest adapter onto the faucet

mounting nipple and ﬁrmly press the 3/8” tubing all the way into

the end of the ﬁtting.

For 1/4” tubing, ﬁrst insert the white 1/4” tubing adapter into

the John Guest ﬁtting, then insert the tubing all the way into the

ﬁtting.

6. Fully open the handle on the pure water faucet and then turn

on the water supply. Allow the water to run to rinse any debris

from the system.

7. Check for leaks especially at the water supply attachments.

2429 E Olympic Blvd., Los Angeles, CA 90021

800-392-7277 • 213-627-8441 • www.westbrass.com

M10 x 1.0

2-1/2”

3/8” Tubing adapter

3/8” x 1/4” Tubing Reducer

8”

2-3/8”

1-3/4”

2-1/8”

9”

1/2 ”

5-1/2”

D2035

Pure Water Faucet

For use with ﬁltration units.

Fits 3/8” or 1/4” PVC or

cop-

per tubing water supplies

1. Remove the mounting nut and

base washer from the faucet.

2. Seat O-ring in base groove.

If desired a thin bead of silicone

seal can be applied to the O-ring

for added sealing power. Please

do not use Plumber’s Putty.

3. Center the faucet in the mount-

ing hole and fasten with base

INSTALLATION

INSTRUCTIONS:

washer and mounting nut. Do not over tighten.

4. Determine whether your supply tubing is 1/4” or 3/8”. Make

sure the tubing end is free from burrs, or gouges and is cut

squarely.

5. For 3/8” thread the brass John Guest adapter onto the faucet

mounting nipple and ﬁrmly press the 3/8” tubing all the way into

the end of the ﬁtting.

For 1/4” tubing, ﬁrst insert the white 1/4” tubing adapter into

the John Guest ﬁtting, then insert the tubing all the way into the

ﬁtting.

6. Fully open the handle on the pure water faucet and then turn

on the water supply. Allow the water to run to rinse any debris

from the system.

7. Check for leaks especially at the water supply attachments.

2429 E Olympic Blvd., Los Angeles, CA 90021

800-392-7277 • 213-627-8441 • www.westbrass.com

TO CLEAN:

Do not allow your product to come into contact with any cleansers forti-

ﬁed with ammonia, bleach, grease-cutters or other surfactant chemicals.

Soft Scrub, Dawn Liquid Soap, Palmolive or any other combined cleaners

contain certain chemical components that will dissolve and remove the

ﬁnish’s protective coating, and eventually the ﬁnish itself. Use only plain

warm water and mild soap on a soft cloth or sponge. Avoid using any

sponge with a scouring pad to clean your product. It is not necessary to

rub hard to remove spots.

With the exception of living ﬁnishes, all Westbrass decorative ﬁnishes

are protected by the strongest ﬁnish treatments available while maintain-

ing their luxurious appearance. While some ﬁnishes are more durable

than others, no ﬁnish is indestructible. Polished Chrome, Satin Nickel and

PVD Polished Brass ﬁnishes are the most durable. All other ﬁnishes are

electroplated; some are then coated to enhance the gloss and durability.

“Living” ﬁnishes are uncoated, designed to be exposed to the air and

other elements, with the intention to age and change in their natural

beauty. All of our ﬁnishes, plated and living, require some care in use.

TO PROTECT:

An occasional application of Carnauba wax (without cleaners), like that

found in Flitz Faucet Wax, Turtle Wax for Clear Coat Car Finishes or Mc-

Guire’s Premium Wax, will enhance the ﬁnish lustre, reduce hard water

spots and add an extra layer of protection to your ﬁnish.