E3

Flexineb E3 Operating instructions

  • I've reviewed the provided document which is a guide for updating the firmware of the Flexineb E3 nebulizer. The instructions include details on how to connect this device to a computer via USB, download the update, and perform the firmware upgrade. The guide also covers relevant switch positioning and cable types. I'm ready to answer your questions about this process or the device itself.
  • What type of USB cable do I need?
    Where can I download the firmware update?
    What do I do after the firmware update is complete?
Firmware Update Instructions
June 2023 Page 1 of 5
Step 1:
Remove the battery door and battery as shown. If your unit has a Red Switch, then move it to the
RIGHT position for firmware update function.
Step 2:
Depending on the E3 version you have connect either a Mini-B USB cable (digital camera type
cable) or Micro USB cable (android phone type cable) to the E3 controller end and connect the
standard USB end to your laptop or PC as shown.
Mini-USB
Micro-USB
Switch: update
position
Firmware Update Instructions
June 2023 Page 2 of 5
Step 3:
Go to www.flexineb.com website, click on Support tab - Firmware Update
Or click this link https://flexineb.com/pages/firmware-update
Step 4:
Click on Download (Windows).
Step 4:
An executable file will download to the bottom left corner of your PC.
Firmware Update Instructions
June 2023 Page 3 of 5
Step 5:
Click on the ʌ arrow and then Open.
Step 6:
Click on
More Info
Click on
Run anyway
Firmware Update Instructions
June 2023 Page 4 of 5
Step 7:
The program will search for your E3 unit before proceeding to the Update function
Click on Update.
Step 8:
Device updated successfully message appears.
Click OK and then Exit to complete the update.
Firmware Update Instructions
June 2023 Page 5 of 5
Step 9:
Unplug the USB cable.
Move the Red Switch back to the LEFT position for normal function on units with this switch.
Re-fit the battery and add the battery door. All done.
END
/