2. Sargent
  3. A7476D
A7476D

Sargent A7476D Operating instructions

  • Hello! I've reviewed the document about the Lever Fixed Core Cylinder (11 Line) tailpiece replacement. This document provides step-by-step instructions on how to replace the tailpiece on Schlage cylinders using a SARGENT supplied tailpiece. I'm ready to answer any questions you have regarding the tailpiece replacement procedure.
  • What is the first step in removing the tailpiece?
    What is supplied with the new tailpiece?
    What is the final step in the tailpiece replacement?
1-800-727-5477 • www.sargentlock.com A7476D 06/20
Copyright © 2020 SARGENT Manufacturing Company. All rights reserved.
Reproduction in whole or in part without the express written permission
ofSARGENT Manufacturing Company is prohibited.
Tailpiece Instructions
30-Option Lever to Accept Schlage®
Fixed Core Cylinder (11 Line)
1. Depress cap pin and unscrew end cap to remove tailpiece
from Schlage® cylinder.
2. Insert new tailpiece (supplied by SARGENT).
3. Re-assemble end cap over new tailpiece.
End Cap
Cap Pin
Schlage® cylinder
/