SEI FA583500TX Assembly Instruction Manual

Brand: SEI

Model: FA583500TX

Type: Assembly Instruction Manual

This manual is also suitable for

FA583700TX

FA583700TX

Black/Copper Trim Gel

Corner Fireplace

Assembly Instruction

For assistance with assembly contact:

Southern Enterprises Inc.

Customer Service 1-800-633-5096

[email protected]

www.seidal.com

Tool List: 1/4" drill bit, drill, tape measure and pencil .

FA583700TX

Black/Copper Trim Gel Corner Fireplace

Parts List

Please review all parts and hardware before disposing of any packaging.

Call Customer Service if missing hardware. Do not return to store/retailer.

Screws shown actual size. Using a screw that is too long will cause damage.

Before beginning assembly, separate each type of screw. Carefully study

the screw diagrams below.

Suggested tools: Phillips head screw driver, power drill, ¼” drill bit, 24”

level, and a tape measure. Unit needs to be hung on wall stud for more

security and stability.

(1) Candle Holder

1 PC

(2) Fuel Canister holder

3 PCS

(3) Top Frame

1 PC

(4) Bottom Frame

1 PC

(5) Grill Front Panel

1PC

(6) Insulation Foam

1PC

(9)Screw 19PCS

3/16x10mm

(10)Nut 5PCS

(7) Right Panel

1 PC

(8) Left Panel

1 PC

(11)Open rench 1PC

Care and Cleaning Instructions:

Before using, wipe with a clean, dry cloth.

Avoid rubbing or scratching the

surface with rough or abrasive objects.

For replacement parts or questions, please

call Customer Service at 1-800-633-5096.

Do not return product to store. Please call

manufacturer for assistance, questions or parts.

Assembly Tool Required

No.2 Phillips Screwdriver

FA583700TX

Black/Copper Trim Gel Corner Fireplace

Assembly Instructions

PLEASE USE IN WELL VENTILATED AREA

The fireplace will have open flames and will generate heat.

 Make sure to keep all combustible items away from the fireplace when the gel fuel is

burning.

 DO NOT touch the fireplace when the gel fuel is burning.

 Not recommended for use on wall paper or wood paneled walls due to risk of

discoloration over time ..

1. Attach right panel (7) to left

panel (8) by using screw (9) and

nut (10) as shown.

Figure 1

2. Attach top frame (3) and

bottom frame (4) to side panels

by using screw (9) as shown.

3. Put insulation foam (6) at the

corner of floor then put on

fireplace as shown. .

Figure 3

Figure 2

4. Remove the three fuel canister

holders (2) from the fireplace and

install one gel fuel canister(1,

Figure 4 ) into each of the

holders.

NOTICE

Make sure to remove the gel fuel

canister paper label (4,Figure 4 )

before installing the canister into

the holder.

Shake the gel fuel canister before

installing it into the canister

holder.

5. Install the gel fuel holders into

the fireplace into the appropriate

mounting hole (3, Figure 4) in the

fireplace.

6. Following the instructions on

the gel fuel canister, remove the

lid (2,Figure 5 ) from the gel fuel

canister (1,Figure 5 ), and using a

long match, light the fuel in each

of the canister. Candle holder can

be used to extinguish fire.

Figure 5

Figure 4

7. Inserting grill front panel (5) as

shown.

Figure 6

 PROLONGED USE OF THE GEL FUEL IN THE FIREPLACE WILL CAUSE THE FIREPLACE

TO BECOME HOT AND POTENTIALLY CAN CAUSE BURNS IF TOUCHED.

 DO NOT BURN MORE THAN THREE CANISTERS OF FUEL AT ONE TIME.

 BEFORE LIGHTING THE FUEL, MAKE SURE THAT THE PAPER LABEL IS REMOVED

FROM EACH OF THE GEL FUEL CANISTERS.

 USE LONG MATCHES TO LIGHT EACH CANISTER OF FUEL.

 DO NOT TOUCH THE CANISTERS WITH BARE HANDS UNTIL THE FLAME HAS BEEN

EXTINGUISHED FOR 20 MINUTES.

 DO NOT BURN ANYTHING EXCEPT THE SPECIFIED CANISTERS OF GEL FUEL IN THE

FIREBOX.

 KEEP CHILDREN AWAY FROM THE FIREPLACE WHEN IN USE.

 KEEP FLAMABLE OBJECTS, SUCH AS CURTAINS OR DRAPERYS, AWAY FROM THE

FIREPLACE WHEN THE GEL FUEL HAS BEEN IGNITED.

 MAKE SURE THE CUSTOMER DOES NOT PLACE ANY DECORATIVE ITEMS ON TOP OF

THE UNIT AT ANYTIME.

 DO NOT TOUCH THE UPPER PART OF THE UNIT WHILE IT IS STILL IN OPERATION.

 THE CANDLE HOLDER ACTS AS A COVER TO PUT OUT FIRE IF ONE WISHES TO STOP

THE FLAME.

 NEVER LEAVE BURNING GEL FUEL UNATTENDED.

 CARE INSTRUCTION: WIPE DOWN UNIT AND CANDLE HOLDER WITH SOFT DAMP

CLOTH.

 WHEN USING THE CANDLE HOLDER PLEASE MAKE SURE THAT THE CANNISTER

HOLDERS ARE IN PLACE.

We'd love to hear from you! Email us photos of our products in your home at

[email protected] and we might feature it on our site or use it to model one of our inspirational

photos.

“PARTS WILL BE SENT IF AVAILABLE FROM SEI”

Parts Replacement Form

Customer Information

Name

Address

City/State/Zip Code

Phone Number

Please indicate where you purchased this item: Stor e/ Website/ Catalog

Please indicate color/size/style number:

Style No

Parts Letter

Parts Description

Quantity Needed

Missing or damaged hardware and/ or parts will be replaced free of charge. We do not sell parts. Southern

Enterprises Inc. will provide replacement parts for only those items purchased within the last 9 months. If this

product has not been purchased from our retail affiliates (within 9 months), we are under no obligation to

provide parts or replacements merchandise. Parts will not be available for items arriving fully assembled.

Customer Service 1-800-633-5096

[email protected]

Southern Enterprises, Inc.

600 Freeport Parkway, Suite 200

Coppell, Texas 75019

SEI FA583500TX Assembly Instruction Manual

Brand: SEI

Model: FA583500TX

Type: Assembly Instruction Manual

This manual is also suitable for

FA583700TX

Download PDF

report

SEI FA583500TX Assembly Instruction Manual

This manual is also suitable for

SEI FA583500TX Assembly Instruction Manual

Related papers

Other documents