FA586700TX
“
““
“LOFT” GLASS GEL
FIREPLACE
Assembly Instruction
For assistance with assembly contact:
Southern Enterprises Inc.
Customer Service 1-800-633-5096
www.seidal.com
© Southern Enterprises Inc. All Right Reserved
.
Support Questions: Contact Southern Enterprises, Inc. at 1-800-633-5096.
For sales inquiries, contact Sylvane at 1-800-934-9194 or visit www.sylvane.com
FA586700TX
“
““
“LOFT” GLASS GEL FIREPLACE
Parts List
Please review all parts and hardware before disposing of any packaging.
Call Customer Service if missing hardware. Do not return to store/retailer.
Screws shown actual size. Using a screw that is too long will cause damage.
Before beginning assembly, separate each type of screw. Carefully study
the screw diagrams below.
(1) Fireplace assembly
1 PC
(2)Fuel canister holder
3PCS
(3)Candle holder (4)Glass Panel
1 PC 2 PCS
(5) Glass Pad (6) Washer
4PCS 8PCS
(7) Screw (8) Foot-cap
4PCS 4PCS
5/16”x30mm
Care and Cleaning Instructions:
Before using , wipe with a clean , dry cloth.
Avoid rubbing or scratching the
surface with rough or abrasive objects.
For replacement parts or questions, please
call Customer Service at 1-800-633-5096.
Do not return product to store. Please call
manufacturer for assistance, questions or
parts.
FA586700TX
“LOFT” GLASS GEL FIREPLACE
Assembly Instructions
DANGER
PLEASE USE IN WELL VENTILATED AREA
The fireplace will have open flames and will generate heat.
Make sure to keep all combustible items away from the fireplace when the gel fuel is
burning.
DO NOT touch the fireplace when the gel fuel is burning.
1. Attach washer (6) and screw
(7) to fireplace assembly (1) as
shown.
Figure 1
2. Attach glass panel (4) to the
fireplace and put the foot-cap (8)
at corner as shown.
3. Attach washer (6) and glass
pad (5) to screw (7) as shown
and make sure glass pad
(5) is tightened totally.
Figure 2
Figure 3
1
4
8
6
1
5
4. Remove the three fuel canister
holders (2, Figure 4) from the
fireplace and install one gel fuel
canister (1, Figure 4) into each of
the holders.
NOTICE
Make sure to remove the gel fuel
canister paper label (4, Figure 4)
before installing the canister into
the holder.
Shake the gel fuel canister before
installing it into the canister
holder.
5. Following the instructions on
the gel fuel canister, remove the
lid (2, Figure 5) from the gel fuel
canister (1, Figure 5), and using a
long match, light the fuel in each
of the canister. Candle holder can
be used to extinguish fire.
Figure 4
Figure 5
Gelfuel
4
1
2
3
2
1
PROLONGED USE OF THE GEL FUEL IN THE FIREPLACE WILL CAUSE THE FIREPLACE
TO BECOME HOT AND POTENTIALLY CAN CAUSE BURNS IF TOUCHED.
DO NOT BURN MORE THAN THREE CANISTERS OF FUEL AT ONE TIME.
BEFORE LIGHTING THE FUEL, MAKE SURE THAT THE PAPER LABEL IS REMOVED
FROM EACH OF THE GEL FUEL CANISTERS.
USE LONG MATCHES TO LIGHT EACH CANISTER OF FUEL.
DO NOT TOUCH THE CANISTERS WITH BARE HANDS UNTIL THE FLAME HAS BEEN
EXTINGUISHED FOR 20 MINUTES.
DO NOT BURN ANYTHING EXCEPT THE SPECIFIED CANISTERS OF GEL FUEL IN THE
FIREBOX.
KEEP CHILDREN AWAY FROM THE FIREPLACE WHEN IN USE.
KEEP FLAMABLE OBJECTS, SUCH AS CURTAINS OR DRAPERYS, AWAY FROM THE
FIREPLACE WHEN THE GEL FUEL HAS BEEN IGNITED.
MAKE SURE THE CUSTOMER DOES NOT PLACE ANY DECORATIVE ITEMS ON TOP OF
THE UNIT AT ANYTIME.
DO NOT TOUCH THE UPPER PART OF THE UNIT WHILE IT IS STILL IN OPERATION.
THE CANDLE HOLDER ACTS AS A COVER TO PUT OUT FIRE IF ONE WISHES TO STOP
THE FLAME.
NEVER LEAVE BURNING GEL FUEL UNATTENDED.
CARE INSTRUCTION: WIPE DOWN UNIT AND CANDLE HOLDER WITH SOFT DAMP
CLOTH.
WHEN USING THE CANDLE HOLDER PLEASE MAKE SURE THAT THE CANNISTER
HOLDERS ARE IN PLACE.
DANGER
We'd love to hear from you! Email us photos of our products in your home at [email protected] and we might
feature it on our site or use it to model one of our inspirational photos.
“PARTS WILL BE SENT IF AVAILABLE FROM SEI” “THIS IS NOT A WARRANTY”
Parts Replacement Form
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/ Website/ Catalog
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity Needed
Customer Service 1-800-633-5096
Southern Enterprises, Inc.
600 Freeport Parkway, Suite 200
Coppell, Texas 75019
Please count, identify and compare parts and hardware list to be sure all parts are present. It may help to divide
parts and label them to correspond with part list. Extra hardware may be included. If any items are missing, please
contact Southern Enterprises at 800-633-5096 or in Dallas (972) 869-0111/ 9am – 4pm Mon-Fri Central time if you
have product issues with your purchase. Please ask for a customer service representative for issues involving
damages or replacement parts. Please ask for a technical assistance representative for any issues with product
assembly and product construction. Please contact the retailer that you purchased from for returns.
Missing or damaged hardware and/ or parts will be replaced free of charge. We do not sell parts. We do not
recommend modifying product(s) and we are not responsible for any damages due to product modification(s).
If this product has not been purchased from our retail affiliates (within 9 months), we are under no obligation to
provide parts or replacements merchandise. Parts will not be available for items arriving fully assembled.
Support Questions: Contact Southern Enterprises, Inc. at 1-800-633-5096.
For sales inquiries, contact Sylvane at 1-800-934-9194 or visit www.sylvane.com
/