AireRyder LK40112AW Installation guide

Brand: AireRyder

Model: LK40112AW

Category: Household fans

Type: Installation guide

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

WARNING:

TO AVOID RISK OF ELECTRICAL SHOCK. BE SURE TO SHUT OFF

POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.

NOTE: 1.Before installing, consult local electrical codes for wiring and grounding requirements.

2.The combined weight of your ceiling fan and light kit can not exceed 35 pounds unless

additional support is provided for the fan.

Installation Steps

Motor

Switch Box

Terminal(Groove)

Terminal(Tongue)

Switch Box cover

Light kit

Set Screw

Wire Nut

Fixture

Nipple

Tube Cap

Tube

Metal Holder

Nipple-1

Pull Chain

Glass shade

Rubber Washer

Hex Nut

Cap

Finial

Metal Washer

Wire Nut

Washer

Nipple-1

Screw

Plug

Screw

Hex Nut

Fig.1

Coupling

Pull Chain for Fan

LK40112/LK40162

1. Remove the switch box cover from the fan by loosing 3 screws.

2. Unscrew and discard the plug from the switch box cover.

3. Attach the light kit to the switch box cover.

***For fans of the Fig.1, please attach the nipple-1 of the light kit to the hole of the switch

box cover, and then thread the wires through the washer and hex nut, and secure tightly.

***For fans of the Fig.2, please attach the nipple-1 of the light kit to the hole in the center

of the switch box cover, and then secure with 2 set screws to the switch box cover.

4. Make wire connections with the wire nuts:

---Connect black or blue wire from light kit to blue wire from the fan.

---Connect white wire form light kit to white wire from the fan.

Carefully tuck wires back into the switch box cover.

5. Install the Nipple to the Coupling and adjust the length with the Hex Nut.

6. Install the Tube, Tube Cap and Metal Holder into the Nipple by the Hex Nut.

7. Reinstall the switch box cover with the 3 screws.

8. Install bulbs.( Please do not exceed the maximum capacity which is recommended on the

package.)

9. Thread the pull chain through the glass shade, rubber washer, metal

washer and hex nut in order, and secure with the hex nut to the nipple.

10. Thread the pull chain through the cap and finial, and secure with the finial to the nipple.

11. Thread the pull chain of the fan through the glass shade and the cap.

*** Make sure the hole of glass shade and the hole of the cap for fan was match.

12. Turn on the power at fuse or circuit box.

070424

LK40112/LK40162--- Page 1

For Ceiling Light: (See Fig.1)

LK40112/LK40162--- Page 2

1. Take out the canopy set from the hardware package for

ceiling light.

2. Thread the fixture wires through the canopy set. Secure

the canopy set onto nipple(-a) by using the coupling.

4. Attach two screws to the mounting strap, then secure

them with two lock nuts. Adjust the length of the screws

if necessary.

5. Attach the mounting strap to the outlet box by using

two mounting screws.

6. Pull out the outlet wires and the house grounding wire

from the outlet box. Make wire connections using the

wire nuts:

---The black wire from fixture to the black wire from the

outlet box.

---The white wire from fixture to the white wire from the

outlet box.

---Attach the fixture grounding wire to the mounting strap

with the green grounding screw. Then connect it to the

house grounding wire with a wire nut.

Carefully tuck the wires back into the outlet box.

7. Attach canopy to the mounting strap by inserting the

screws, then secure them with the bolt nuts.

8. Follow steps 7~9 as for Light Kit.

070424

Mounting Parts for Ceiling Light

Fig.1

Coupling

Nipple(-a)

Cap(-a)

Outlet Box

House Grounding Wire

Fixture Grounding Wire

Wire Nut

Screw

Mounting Strap

Green Grounding Screw

Lock Nut

Mounting Screw

Mounting Parts for Ceiling Light

Fig.1

Hex Nut

Grounding Pad

Washer

Canopy

Bolt Nut

Cover

Nipple(-c)

Coupling

Nipple(-a)

Cap(-a)

Hex Nut

Washer

Outlet Box

House Grounding Wire

Fixture Grounding Wire

Wire Nut

Screw

Mounting Strap

Green Grounding Screw

Lock Nut

Mounting Screw

Canopy Set

Bolt Nut

AireRyder LK40112AW Installation guide

Brand: AireRyder

Model: LK40112AW

Category: Household fans

Type: Installation guide

Download PDF

report

AireRyder LK40112AW Installation guide

AireRyder LK40112AW Installation guide

Related papers

Other documents