World Imports WI7426189 Installation guide

ASSEMBLY INSTRUCTION

SKU#74261-89

Note: Please consult a qualified electrician if you are not certain of the installation

CAUTION:

Before starting the installation, disconnect the power by turning off the circuit breaker or

by removing the fuse at the fuse box.

1. Thread the shorter 3/4” mounting screws completely into the Mounting strap, in the opposite

direction of the green ground screw. These mounting screws should protrude away from the outlet

box when the mounting strap is attached. Attach the mounting strap by tightening the longer

mounting screws securely into the outlet box.

2. Strip 3/4” of insulation from wire ends. Twist stripped ends together with pliers black to black and

white to white. Snip ends. Attach copper wire to ground wire. Attach wire nuts. Tap nuts and wires

together.

3. Place the wall plate of fixture over the mounting strap by cap nut over the screws until fixture was

held firmly to the wall.

4. Place glass shade over nipple and use cap and finial to tighten.

5. Install light bulbs. Use only the specified type bulbs and maximum rated wattage or less.(Bulbs not

included)

Lock Nut

Fixture Body

Outlet Box Screw

Bulb

Mounting Strip

Wall Plate

Glass Shade

Nipple

Cap

Finial

Download PDF