AireRyder LK40112AW Installation guide

AireRyder
Brand
AireRyder
Model
LK40112AW
Category
Household fans
Type
Installation guide
ASSEMBLY AND INSTALLATION
INSTRUCTIONS
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK. BE SURE TO SHUT OFF
POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.
NOTE: 1.Before installing, consult local electrical codes for wiring and grounding requirements.
2.The combined weight of your ceiling fan and light kit can not exceed 35 pounds unless
additional support is provided for the fan.
Installation Steps
Motor
Motor
Switch Box
Switch Box
Terminal(Groove)
Terminal(Tongue)
Switch Box cover
Switch Box cover
Light kit
Light kit
Set Screw
Wire Nut
Fixture
Nipple
Tube Cap
Tube
Metal Holder
Nipple-1
Pull Chain
Glass shade
Rubber Washer
Hex Nut
Hex Nut
Hex Nut
Cap
Finial
Metal Washer
Wire Nut
Washer
Nipple-1
Nipple-1
Screw
Plug
Screw
Hex Nut
Fig.1
Coupling
Pull Chain for Fan
LK40112/LK40162
1. Remove the switch box cover from the fan by loosing 3 screws.
2. Unscrew and discard the plug from the switch box cover.
3. Attach the light kit to the switch box cover.
***For fans of the Fig.1, please attach the nipple-1 of the light kit to the hole of the switch
box cover, and then thread the wires through the washer and hex nut, and secure tightly.
***For fans of the Fig.2, please attach the nipple-1 of the light kit to the hole in the center
of the switch box cover, and then secure with 2 set screws to the switch box cover.
4. Make wire connections with the wire nuts:
---Connect black or blue wire from light kit to blue wire from the fan.
---Connect white wire form light kit to white wire from the fan.
Carefully tuck wires back into the switch box cover.
5. Install the Nipple to the Coupling and adjust the length with the Hex Nut.
6. Install the Tube, Tube Cap and Metal Holder into the Nipple by the Hex Nut.
7. Reinstall the switch box cover with the 3 screws.
8. Install bulbs.( Please do not exceed the maximum capacity which is recommended on the
package.)
9. Thread the pull chain through the glass shade, rubber washer, metal
washer and hex nut in order, and secure with the hex nut to the nipple.
10. Thread the pull chain through the cap and finial, and secure with the finial to the nipple.
11. Thread the pull chain of the fan through the glass shade and the cap.
*** Make sure the hole of glass shade and the hole of the cap for fan was match.
12. Turn on the power at fuse or circuit box.
070424
TM
LK40112/LK40162--- Page 1
For Ceiling Light: (See Fig.1)
LK40112/LK40162--- Page 2
1. Take out the canopy set from the hardware package for
ceiling light.
2. Thread the fixture wires through the canopy set. Secure
the canopy set onto nipple(-a) by using the coupling.
4. Attach two screws to the mounting strap, then secure
them with two lock nuts. Adjust the length of the screws
if necessary.
5. Attach the mounting strap to the outlet box by using
two mounting screws.
6. Pull out the outlet wires and the house grounding wire
from the outlet box. Make wire connections using the
wire nuts:
---The black wire from fixture to the black wire from the
outlet box.
---The white wire from fixture to the white wire from the
outlet box.
---Attach the fixture grounding wire to the mounting strap
with the green grounding screw. Then connect it to the
house grounding wire with a wire nut.
Carefully tuck the wires back into the outlet box.
7. Attach canopy to the mounting strap by inserting the
screws, then secure them with the bolt nuts.
8. Follow steps 7~9 as for Light Kit.
070424
TM
Mounting Parts for Ceiling Light
Fig.1
Coupling
Nipple(-a)
Cap(-a)
Outlet Box
House Grounding Wire
Fixture Grounding Wire
Wire Nut
Screw
Mounting Strap
Green Grounding Screw
Lock Nut
Mounting Screw
Mounting Parts for Ceiling Light
Fig.1
Hex Nut
Grounding Pad
Washer
Canopy
Bolt Nut
Cover
Nipple(-c)
Coupling
Nipple(-a)
Cap(-a)
Hex Nut
Washer
Outlet Box
House Grounding Wire
Fixture Grounding Wire
Wire Nut
Screw
Mounting Strap
Green Grounding Screw
Lock Nut
Mounting Screw
Canopy Set
Bolt Nut
  • Page 1 1
  • Page 2 2

AireRyder LK40112AW Installation guide

AireRyder
Brand
AireRyder
Model
LK40112AW
Category
Household fans
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents