Gill WATER JUMP BARRIERS Operating instructions

Brand: Gill

Model: WATER JUMP BARRIERS

Type: Operating instructions

Color Part Number

Royal Blue 740145202

Red 740145203

White 740145204

Gray 740145209

Black 740145212

White w/ Graphic 740145204SP

The bottom of the barrier seal is weighed

down with a PVC pipe filled with sand.

The top of the barrier seal is supported

by a 1-5/16" diameter pipe.

The light weight barrier seal moves up and down

with the barrier to prevent glare at all heights.

INST740145

Page 1 of 2

6/1/2016

800-637-3090

7401452XX - MESH BARRIER SEAL

www.gillathletics.com

INSTRUCTIONS

Approach Side View

Mesh barrier seal reduces glare

and is available in five colors

Tools needed:

Two people

One 9/16" wrench

PVC Glue

Sand

Top Support Pipe

Bottom Weighted PVC Pipe

WARNING: This product can expose you to Vinyl Chloride,

which is known to the State of California to cause cancer.

For more information go to www.p65warnings.ca.gov.

provided. Fill the PVC pipe with sand and glue the

other cap on.

of the top support pipe.

1. Put the black vinyl end caps onto the the ends

pocket (with cut outs) of the barrier seal.

2. Slide the top support pipe through the top

barrier on the water pit side. Use the pipe

hangers and existing hardware to hang the top

support pipe.

3. Remove the bolt from the under side of the

3. Glue one end cap onto the PVC pipe. Glue is not

4. Slide the assembled pvc pipe into the bottom pocket

of the barrier seal and let it drape into the water pit.

7401452XX - MESH BARRIER SEAL

www.gillathletics.com

Page 2 of 2

INST740145

6/1/2016

800-637-3090

INSTRUCTIONS

Top Support Pipe

(7401453)

Black Vinyl Pipe Cap

(PCAP00056002)

88"

Pipe Hanger

(CLMP00088)

Gill WATER JUMP BARRIERS Operating instructions

Gill WATER JUMP BARRIERS Operating instructions

Gill WATER JUMP BARRIERS Operating instructions

Related papers

Other documents