2. Gill
  3. CONVERSION TAKE-OFF BOARD

Gill CONVERSION TAKE-OFF BOARD Operating instructions

  • I've reviewed the specification document for the Gill Athletics 441C Take off board assembly. This document describes a replacement take off board with an 8-inch wide composite board, designed to fit in a 442 tray, and includes features like a 1/2-inch thick track surface and compliance with NFHS and NCAA rules. I'm ready to answer your questions about it.
  • What is the 441C?
    What is the width of the composite take off board?
    What material is the base board made of?
47 3
4
"
8"
19 1
2
"
The 441C is a replacement take off board assembly that fits in a 442 tray.
This take off board assembly has an 8" wide composite take off board. The rest of the base board is covered by 1/2"
thick track surface that is glued in place. The base board is welded aluminum extrusions.
Meets NFHS rules
Meets NCAA rules
www.gillathletics.com
Copyright
2016 by Gill Athletics.
All rights reserved.
800-637-3090
1/9/2018
INST441C
Page 1 of 2
441C - 8" CONVERSION TAKE OFF BOARD ASSEMBLY
SPECIFICATION
THIS WARNING IS GIVEN IN COMPLIANCE
WITH CALIFORNIA'S PROPOSITION 65:
WARNING
This product contains chemicals known to the
State of California to cause cancer, birth defects
or other reproductive harm.
1
7
2
8
PART #
DESCRIPTION
QTY.
1
441C05
COMPOSITE CONVERSION TAKE OFF BOARD
1
2 M1287
1/4-20 X 1" Phillips Flat Head Screw SS
4
7 M1274
1/4-20 NYLOCK THIN HEX NUT
8
8 M2514
WASHER,FLAT, 1/4 SS (18-8 SS)
8
www.gillathletics.com
Copyright
2016 by Gill Athletics.
All rights reserved.
800-637-3090
1/9/2018
INST441C
Page 2 of 2
441C - 8" CONVERSION TAKE OFF BOARD ASSEMBLY
SPECIFICATION
WARNING: Cancer and Reproductive Harm –
For more information go to www.p65warnings.ca.gov
F
/