WARNING
:
This product can expose you to Titanium Dioxide,
which is known to the State of California to cause cancer.
For more information go to www.p65warnings.ca.gov.
!
E
Specifications:
This standard's upright and riser are made of aluminum while the base is
made of thick steel to provide a solid foundation for the standard. Scale is
shown in both English and Metric measurements for easy calibration. The
base has four rubber feet, and wheels for easy transportation.
Operation:
To adjust the riser, grab underneath one of the bar rests, and loosen the
clamping knob. Position the riser to the desired height and re-tighten the
knob. The scale reads in both English (feet and inches) and Metric
(centimenters). Height is read off the top of the upright cap.
www.gillathletics.com
Copyright
2019 by Gill Athletics.
All rights reserved.
800-637-3090
10/28/2021
INST78105
Page 1 of 3
S4 HIGH JUMP STANDARD
INSTALLATION INSTRUCTIONS
2
1
1
3
#
Part #
Description
QTY.
1
REPL00048
Flatwasher - 5/16"
8
2
5/16"-18 Nylock Hex Nut
4
3
5/16"-18 x 1" hex bolt, plated
4
www.gillathletics.com
Copyright
2019 by Gill Athletics.
All rights reserved.
800-637-3090
10/28/2021
INST78105
Page 2 of 3
S4 HIGH JUMP STANDARD
INSTALLATION INSTRUCTIONS
REPL00047
(WHEEL REPLACEMENT KIT)
77230
OFFSET WITH
HARDWARE
BASE00137
BASE ASSEMBLY
78160
UPRIGHT/ RISER
ASSEMBLY
BASE00151
BASE ASSEMBLY
77240
ADJUSTABLE HEIGHT
READOUT
ECAP00063
EXTRUSION CAP
HAND00106
CLAMPING KNOB
ECAP00061
EXTRUSION CAP
MISC00310
GLIDE
CLMP00094
CLAMPING PLATE
Part #
Description
QTY.
REPL00047
HEX HEAD CAP SCREW; 5/16"-18 X 1-3/4"
1
WHEEL 64MM SKATE
1
NYLOCK NUT; 5/16"-18; THIN
1
BEARING ABEC 1 608ZZ
1
FLAT WASHER; 5/16"; ZINC; USS
1
www.gillathletics.com
Copyright
2019 by Gill Athletics.
All rights reserved.
800-637-3090
10/28/2021
INST78105
Page 3 of 3
S4 HIGH JUMP STANDARD
INSTALLATION INSTRUCTIONS
/
