meitav-tec ETN24-HC11-3S-PROG-US Product information

Brand
meitav-tec
Model
ETN24-HC11-3S-PROG-US
Type
Product information
Date:No.Revision Date File name: ETN24-HC11-3S-PROG_C.VSD
Drawn: P.Rechtman
Checked: S.Lukin
Approved: E.Roy
ETN24-HC11-3S-PROG
Aug 16, 2007
Technician Settings:
On/Off Select Prog
24Vac
External sensor
(option)
Fan Medium
Compressor
ETN24-HC11-3S-PROG
RCRHCW1
TTG1Y1
Heater
G3 G2
Default switch
ON
123456
Print name: ETN24/PROG
Fan Low
Fan High
S1
Receiver for
remote control
(Option)
Int./Ext. Sensor
Internal
sensor External
sensor
ON* OFF
no.
Heating Configuration
Electrical
Heat Elem. Oil/
Gas
Time delay for
compressor
3
minutes No Delay
(for test)
OFF* ON
Not in use
S1.1
S1.2
S1.3
S1.6
S1.4
S1.5 OFF* ON
ON* OFF
OFF* ON
DIP switch S1
*Default
External Sensor Connection
1. Disconnect power to the thermostat.
2. Move switch 1 and switch 6 to "OFF" position.
3. Move switch 5 to "ON" position.
4. Connect the EXTERNAL SENSOR to “T”,”T” terminals.
5. Reconnect power to the thermostat.
Important : the external sensor must be SCI type.
LOCK/UNLOCK the Thermostat
- Make sure the set-point temperature is NOT 10oC
- Press and hold the SELECT button (15 sec.) ;
- If thermostat is locked, the display will alternate
between “Loc” (Lock) and Real Time clock.
meitav tec
Tel: +972-3-9626462
Fax: +972-3-9626620
e-mail: support@meitavtec.com
  • Page 1 1

meitav-tec ETN24-HC11-3S-PROG-US Product information

Brand
meitav-tec
Model
ETN24-HC11-3S-PROG-US
Type
Product information
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents