YUNEEC DataPilot Owner's manual

How to uninstall the DataPilot manually:

During the installation of the newest DataPilot it can lead to a problem, sometimes the old version will not be

unistalled automatically…

1: Even if the installation is showed as successful, it will show you again v2.1.12 as the actual installed version.

In this case please leave the DataPilot App and switch to Android menu.

2: Here you can see that, additional to the new DataPilot 2.0, the old version is still installed. This version is still

set as your „Home“-App, therefor it will be opened at every boot as your actual DataPilot.

3: Tap and hold the DataPilot App, as soon as the screen switches and the litter bin appears, move the App

above it and lift your finger.

4: Confirm to uninstall the old Version with the „OK“ button.

5: After you´ve uninstalled the old App, DataPilot 2.0 will become your new „Home“-App automatically. Open it

now by tapping the icon.

6: Maybe you´ll be asked again in the starting sequence of the App if you want to install the version. Confirm it

by tapping the „Install“ button. If you switch to „Version“ again now, you will see that the latest version of the

DataPilot is shown correctly now, you can go on with updating the remaining components now.