Arris DCX 3510-M Installation guide

Brand: Arris

Model: DCX 3510-M

Type: Installation guide

Shaw HDPVR Box

Installation Instructions (Approximate hardware setup time: 10

15 minutes)

C. Screw one end of the included white cable

cord (with silver ends) into your wall cable

outlet and the other end into CABLE IN

on the back of the HDPVR. For an optimal

viewing experience, we recommend using

the included cable cord instead of any others

that you might have around.

A. Your serial number, “Host SN,” is located on the back of the HDPVR (next

to the number 3) and starts with the letter “M.” Alternatively, you can find the

serial number on the white sticker label on the HD box packaging. You can find

your Account number on the mailing label.

Wall Outlet

Cable InCable Out

What’s in the box

Hook up your new hardware

B. Find a location to put your new hardware

that will allow it to breathe.

Cable Cord

(Coax)

Shaw Remote ARRIS DCX 3510-M HDPVR Splitter

Power Pack HDMI Cable IR Receiver +

Tether Cord

(Optional Use)

(Optional & not included

in all packaging)

Serial number

D. Connect the included HDMI cable (black

cable with flat gold ends) from the HDPVR to

your TV. Both video and audio travel through

the HDMI cable. Note the input you plug your

HDMI cable into on the back of your TV (e.g.

HDMI 1, HDMI 2, etc.).

For more advanced audio/video setups, please refer to

the manufacturer’s guide included with your HDPVR.

E. Connect the included power adapter from

the wall power outlet to the HDPVR.

HDMI Out

HDMI In

Television

Power Pack

Now we just need to get your box activated

HD_P3_INSTALL_MAR17_DF

Need additional help?

Call 1-844-574-7429 or visit shaw.ca/selfinstall

A. Turn on your TV, and select the input (e.g. HDMI 1, HDMI 2, etc.)

that you plugged the HDPVR into in Step 2-D. You may see a

blue box appear on your TV or a “no signal” message - don’t

worry, this is normal.

C. Activate your HDPVR online by

visiting myaccount.shaw.ca.

have an account. Once signed in,

under TV section, please select

Self-Install TV equipment and

follow the instructions on your

screen. The activation process

will take approximately 10 mins.

D. During this time messages

(OCAP, APP, ChIP, PSLd, etc)

will display on the front panel

of your HDPVR. Your HDPVR

will be “ready” when the front

panel displays the current

time, and is powered off.

B. Your HDPVR will be “ready” for activation

once “noCP” displays on the front panel.

Manage deviceWork Phone

Manage deviceWork Laptop

Device name

Remove a device or disable Parental Controls for a device.

Manage your FreeRange TV devices

FreeRange TV Devices

Learn about the app

Help

TV Equipment Help

Discover BlueSky TV

Shop TV Equipment

Shop Equipment

Self-Install TV Equipment

Shop Premium Channels

Shop TV Programming

Shop TV

Personal TV

View free channel previews

View my channel list

Current Monthly Service

Change TV plan

Television

Help

Mary Patel

000-0000-0000

Need help?

Live Chat

Sign out

1-888-472-2222

Online Support

Service Updates

My Account

Add Service

My Bills

Internet

My Profile

My AccountSupportShopBusiness

Personal

Cart Webmail Contact

E. To program your Shaw Universal Remote to work with your TV (adjust volume etc.), follow the “Quick Setup”

instructions on the reverse of the remote or visit urcsupport.com/shaw

If you wish to place your HDPVR out of sight (i.e. in a cabinet), plug your IR Receiver into EXT IR IN on the back of your HDPVR. Place

the IR Receiver where your remote’s signal will have a clear line of sight with the IR Receiver.

IMPORTANT - don’t disconnect power or press any buttons on the set top or remote during activation, as it may interrupt the

process. If you do not have Internet access, or need additional help, please call us at 1-844-574-7429.

Arris DCX 3510-M Installation guide

Arris DCX 3510-M Installation guide

Arris DCX 3510-M Installation guide

Related papers

Other documents