BM05
User Manual
We have tried our best to ensure that the contents of this manual
are correct and latest. However, there is no guarantee that
everything is correct. If the contents of this manual do not conform
to the current product, please follow this product. We reserve the
right to change the content or technical specifications without
prior notice. If the accessories do not match the items in the actual
package, please follow the actual package.
Instructions for the use of baby monitors
Thank you for buying our products, This manual provides you
the monitor information and methods of using the monitor.
1. Safety instruction
1.1 this baby monitor is not a substitute for responsible adult
supervision.
1.2 this product shall be placed in a place that is not accessible to
the baby and shall be kept in a distance of at least 1.5 m from the
baby to ensure that the baby has a corresponding safe range with
the product.
1.3 DC power should not be placed where baby can touch, avoid
to wind the child's body parts and cause baby safety problems.
1.4 this product is not a toy and children are not allowed to play
with it.
1.5 use the correct power adapter: output 5V/1A
About this manual
Product appearance introduction
The camera end
1.camera 2.microphone hole 3.infrared sensor
4.infrared lamp 5.indicator 6.speaker hole
7.antenna 8.temperature sensor 9.DC power supply interface
10.bracket position 11.code button
Handheld display terminal
1.antenna 2.on/off button 3.camera switch button
4.menu/return 5.direction button 6.confirm button
7.music button 8.intercom button 9.display screen
10.microphone hole 11.speaker position 12.bracket
13.DC power supply interface 14.battery cover 15.reset button
Button introduction
3.1On/off button
Long press: monitor is turned on or off
Short press: the LCD screen turns on / off when the power-on .
3.2Confirm button: implement the execution instruction of the menu.
3.3Menu/PTZ
Short press: menu on or off
Long press: PTZ control on and off, and then use the arrow keys to
control the camera rotation
3.4Direction button(up/down/left/right)
Preview interface: Short press the up and down keys to increase the
volume, short press the left and right keys to increase and decrease
the screen brightness
Menu interface: Menu selection function
PTZ interface: Use the arrow keys to adjust the camera angle
3.5Intercom key: In the preview monitoring interface, long press the
intercom key to make a call, at this time the camera can hear the
sound of the monitor
3.6Camera switch button: Short press the switch button to switch
between different cameras in the preview monitoring interface
Function introduction
3.7Music key: Short press the music key on the monitor screen to
switch between different music. Each press can switch one song, a
total of 4 songs can be selected, at the same time can switch to loop
playback, stop playing music function.
3.8Reset button: shutdown reset function, when the machine crashes
or cannot be shut down by pressing the shutdown button for a long
time, please use a suitable thickness object to lightly press the reset
button
3.9Code button: When adding a camera to the display, short press
the code button on the camera to pair with the corresponding
display and add it to the corresponding display
4.1Camera
4.11 Power supply: Output: DC 5V 14.12Working state: Connect the
power supply to the device, and the blue LED indicator lights up,
indicating that the machine has been turned on and is in working
state.
4.13Night vision: This product is equipped with 8 infrared lamps,
which are used to fill light in a dark environment, so that users can
obtain clear images.
4.14Turning on and off the infrared lamp: The infrared lamp can be
turned on and off automatically by detecting the ambient brightness
in the power-on state, without any operation by the user.
4.15 If the image or sound effects are not ideal, try moving the device
to a different location to get the best results.
4.16Pairing is required for the first use, and only after successful use.
For details on pairing, see 4.31 Camera Matching Method.
4.17Camera angle adjustment: Adjust the viewing angle through the
direction keys, long press the menu key to enter the camera angle
adjustment interface, and then use the direction keys to adjust the
viewing angle of the camera. After the adjustment is completed, you
can exit the camera angle interface by long pressing the menu key,
and it will automatically exit this interface after 10S without any
operation.
4.2 Handheld monitor
4.21The product is powered by a built-in battery or a 5V / 1A DC
adapter. The built-in battery can be automatically charged when
connected to a DC adapter.
4.22Power on / off: Turn on the power to the device, long press the
on / off key for 1.5 seconds to achieve power on / off.
4.23 This machine supports two cameras for loop monitoring.
4.24The monitoring screen displays as shown below
The signal strength icon shows the current signal strength.
The temperature icon shows the temperature at the camera
end.
Lullaby icon, 1 means the first lullaby.
The mute icon indicates that the display is muted.
Night vision icon, the camera is in a night environment.
The voice control icon controls the function of automatically
lighting the screen by judging the size of the sound. There
are 3 levels in total. The higher the gear, the higher the
sensitivity, and the lower the sound required to control
the screen.
The time icon shows the current time.
Feeding reminding icon to remind feeding when the set time
is reached.
The current camera icon (you can press the camera switch
key to switch, 1 means camera No. 1 ,2 means camera No. 2).
The microphone icon shows that the display is in a call.
The power icon shows the current power status.
Direction indication (4): PTZ interface, different directions
reflect the rotation direction of the camera
Disconnected icon, the current camera is disconnected.
4.3Menu
The menu options are shown below
Press the Menu / Back key to pop up the menu, which contains 6 items:
Camera
Lullaby
Feeding reminder
Volume
VOX
Other settings
You can press the left and right keys to switch options, press the up and
down keys to select, then press the confirm key to confirm, and press
the menu / back key to exit the setting menu.
4.31Camera
Select the camera settings and enter the following menu:
The functions of each icon:
Cyclic automatic camera switching
Camera angle selection: After selection, there are 3 viewing
angles for selection: camera 1,camera 2, and split screen display, that is,
camera 1 and camera 2 occupy half of the left and right screens
respectively.
Camera matching: It can match 2 cameras.Once match
successful, it can be automatically saved, and there is no need to match
again the next time it is turned on. If you need to rematch, you must
delete the camera first, and then you can only match again after the
deletion is successful.
Matching instruction
1.Menu return button → Camera setting → Camera matching →Select
the camera 1 (or camera 2) that has not been matched → Confirm.At
this point, the blue indicator light on the Display End flashes,
indicating that the camera is being searched.
2.Long press the matching code button of the camera. When the
indicator light on the camera starts to flash, let go and wait for the
automatic matching of the machine.
3.An image appears on the display and automatic matching is
complete.
Note: The“*”icon will appear in the upper right corner of the
camera with a successful match, and the“*”icon will disappear when
the camera is deleted.
Delete the camera: Delete the camera that has been
successfully matched.
4.32 Lullaby selection
Select the music settings, a total of 6 modes, namely: turn off music,
track 1, track 2, track 3, track 4, loop playback, you can also press the
shortcut key "music key" to quickly set.
4.33 Feeding reminder
Select the feeding reminder setting, 5 clock modes to choose from:
turn off reminder function, reminder every hour, reminder every 2
hours, reminder every 3 hours, reminder every 4 hours Select one of
them and press the confirm key.
4.34Volume
Select the sound setting option and press the up and down keys to
freely adjust the sound of the display. The mute icon appears when
the sound is muted.
4.35Voice control
Trigger the control to light the screen by the size of the ambient
sound. Switch to the voice control setting, a total of 4 modes are
selectable, from bottom to top are closed voice control, low
sensitivity, medium sensitivity, high sensitivity. The higher the
sensitivity, the smaller the sound can be detected, that is, the screen
can be lit when a very small sound.
4.36Other settings
Select other settings, the menu as shown in the figure appears:
The functions of each icon :
Screen brightness adjustment. The brightness can be
adjusted by the up and down keys.
creen time setting. The screen time can be set to 1 minute,
3 minutes, 5 minutes, off.
Time setting
Temperature unit setting. The switchable temperatureunits
are Celsius and Fahrenheit.
Anti-flash mode setting, set different frequencies 60Hz, 50Hz
5.Installation
5.1Put the TX camera on the working table at the corresponding
height. where the baby can be monitored , and adjust the angle
of TX camera.
5.2Fixed on the wall with a three-foot bracket and adjust the angle.
6.Maintenance of the monitor
6.1Lens maintenance and cleaning: Please do not touch the lens
with your hands or other dirt to ensure the picture is clear and bright.
When the lens is dirty, wipe it gently with clean gauze.
6.2Product surface cleaning: Wipe the body and LCD display
regularly with a clean, soft gauze.
6.3Product disassemble: Please do not open the machine or repair
it yourself.
6.4Keep dry:Please do not use the product in a humid environment,
otherwise it may cause product failure.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Shenzhen E40 Baby Monitor Display User manual
-
JouSecu B255 User manual
-
JouSecu B152-2T Wireless Video Baby Monitor User manual
-
Evolveo baby monitor n2 Owner's manual
-
JouSecu B152 User manual
-
Levana Astra 31006B User manual
-
-
JLB7tech JLB853 4.3-Inch Split Screen Video Baby Monitor User manual
-
Denver BC-343 User manual
-