Media BM05 User manual

Brand: Media

Model: BM05

Category: Baby video monitors

Type: User manual

BM05

User Manual

We have tried our best to ensure that the contents of this manual

are correct and latest. However, there is no guarantee that

everything is correct. If the contents of this manual do not conform

to the current product, please follow this product. We reserve the

right to change the content or technical speciﬁcations without

prior notice. If the accessories do not match the items in the actual

package, please follow the actual package.

Instructions for the use of baby monitors

Thank you for buying our products, This manual provides you

the monitor information and methods of using the monitor.

1. Safety instruction

1.1 this baby monitor is not a substitute for responsible adult

supervision.

1.2 this product shall be placed in a place that is not accessible to

the baby and shall be kept in a distance of at least 1.5 m from the

baby to ensure that the baby has a corresponding safe range with

the product.

1.3 DC power should not be placed where baby can touch, avoid

to wind the child's body parts and cause baby safety problems.

1.4 this product is not a toy and children are not allowed to play

with it.

1.5 use the correct power adapter: output 5V/1A

About this manual

Product appearance introduction

The camera end

1.camera 2.microphone hole 3.infrared sensor

4.infrared lamp 5.indicator 6.speaker hole

7.antenna 8.temperature sensor 9.DC power supply interface

10.bracket position 11.code button

Handheld display terminal

1.antenna 2.on/oﬀ button 3.camera switch button

4.menu/return 5.direction button 6.conﬁrm button

7.music button 8.intercom button 9.display screen

10.microphone hole 11.speaker position 12.bracket

13.DC power supply interface 14.battery cover 15.reset button

Button introduction

3.1On/oﬀ button

Long press: monitor is turned on or oﬀ

Short press: the LCD screen turns on / oﬀ when the power-on .

3.2Conﬁrm button: implement the execution instruction of the menu.

3.3Menu/PTZ

Short press: menu on or oﬀ

Long press: PTZ control on and oﬀ, and then use the arrow keys to

control the camera rotation

3.4Direction button(up/down/left/right)

Preview interface: Short press the up and down keys to increase the

volume, short press the left and right keys to increase and decrease

the screen brightness

Menu interface: Menu selection function

PTZ interface: Use the arrow keys to adjust the camera angle

3.5Intercom key: In the preview monitoring interface, long press the

intercom key to make a call, at this time the camera can hear the

sound of the monitor

3.6Camera switch button: Short press the switch button to switch

between diﬀerent cameras in the preview monitoring interface

Function introduction

3.7Music key: Short press the music key on the monitor screen to

switch between diﬀerent music. Each press can switch one song, a

total of 4 songs can be selected, at the same time can switch to loop

playback, stop playing music function.

3.8Reset button: shutdown reset function, when the machine crashes

or cannot be shut down by pressing the shutdown button for a long

time, please use a suitable thickness object to lightly press the reset

button

3.9Code button: When adding a camera to the display, short press

the code button on the camera to pair with the corresponding

display and add it to the corresponding display

4.1Camera

4.11 Power supply: Output: DC 5V 14.12Working state: Connect the

power supply to the device, and the blue LED indicator lights up,

indicating that the machine has been turned on and is in working

state.

4.13Night vision: This product is equipped with 8 infrared lamps,

which are used to ﬁll light in a dark environment, so that users can

obtain clear images.

4.14Turning on and oﬀ the infrared lamp: The infrared lamp can be

turned on and oﬀ automatically by detecting the ambient brightness

in the power-on state, without any operation by the user.

4.15 If the image or sound eﬀects are not ideal, try moving the device

to a diﬀerent location to get the best results.

4.16Pairing is required for the ﬁrst use, and only after successful use.

For details on pairing, see 4.31 Camera Matching Method.

4.17Camera angle adjustment: Adjust the viewing angle through the

direction keys, long press the menu key to enter the camera angle

adjustment interface, and then use the direction keys to adjust the

viewing angle of the camera. After the adjustment is completed, you

can exit the camera angle interface by long pressing the menu key,

and it will automatically exit this interface after 10S without any

operation.

4.2 Handheld monitor

4.21The product is powered by a built-in battery or a 5V / 1A DC

adapter. The built-in battery can be automatically charged when

connected to a DC adapter.

4.22Power on / oﬀ: Turn on the power to the device, long press the

on / oﬀ key for 1.5 seconds to achieve power on / oﬀ.

4.23 This machine supports two cameras for loop monitoring.

4.24The monitoring screen displays as shown below

The signal strength icon shows the current signal strength.

The temperature icon shows the temperature at the camera

end.

Lullaby icon, 1 means the ﬁrst lullaby.

The mute icon indicates that the display is muted.

Night vision icon, the camera is in a night environment.

The voice control icon controls the function of automatically

lighting the screen by judging the size of the sound. There

are 3 levels in total. The higher the gear, the higher the

sensitivity, and the lower the sound required to control

the screen.

The time icon shows the current time.

Feeding reminding icon to remind feeding when the set time

is reached.

The current camera icon (you can press the camera switch

key to switch, 1 means camera No. 1 ,2 means camera No. 2).

The microphone icon shows that the display is in a call.

The power icon shows the current power status.

Direction indication (4): PTZ interface, diﬀerent directions

reﬂect the rotation direction of the camera

Disconnected icon, the current camera is disconnected.

4.3Menu

The menu options are shown below

Press the Menu / Back key to pop up the menu, which contains 6 items:

Camera

Lullaby

Feeding reminder

Volume

VOX

Other settings

You can press the left and right keys to switch options, press the up and

down keys to select, then press the conﬁrm key to conﬁrm, and press

the menu / back key to exit the setting menu.

4.31Camera

Select the camera settings and enter the following menu:

The functions of each icon:

Cyclic automatic camera switching

Camera angle selection: After selection, there are 3 viewing

angles for selection: camera 1,camera 2, and split screen display, that is,

camera 1 and camera 2 occupy half of the left and right screens

respectively.

Camera matching: It can match 2 cameras.Once match

successful, it can be automatically saved, and there is no need to match

again the next time it is turned on. If you need to rematch, you must

delete the camera ﬁrst, and then you can only match again after the

deletion is successful.

Matching instruction

1.Menu return button → Camera setting → Camera matching →Select

the camera 1 (or camera 2) that has not been matched → Conﬁrm.At

this point, the blue indicator light on the Display End ﬂashes,

indicating that the camera is being searched.

2.Long press the matching code button of the camera. When the

indicator light on the camera starts to ﬂash, let go and wait for the

automatic matching of the machine.

3.An image appears on the display and automatic matching is

complete.

Note: The“*”icon will appear in the upper right corner of the

camera with a successful match, and the“*”icon will disappear when

the camera is deleted.

Delete the camera: Delete the camera that has been

successfully matched.

4.32 Lullaby selection

Select the music settings, a total of 6 modes, namely: turn oﬀ music,

track 1, track 2, track 3, track 4, loop playback, you can also press the

shortcut key "music key" to quickly set.

4.33 Feeding reminder

Select the feeding reminder setting, 5 clock modes to choose from:

turn oﬀ reminder function, reminder every hour, reminder every 2

hours, reminder every 3 hours, reminder every 4 hours Select one of

them and press the conﬁrm key.

4.34Volume

Select the sound setting option and press the up and down keys to

freely adjust the sound of the display. The mute icon appears when

the sound is muted.

4.35Voice control

Trigger the control to light the screen by the size of the ambient

sound. Switch to the voice control setting, a total of 4 modes are

selectable, from bottom to top are closed voice control, low

sensitivity, medium sensitivity, high sensitivity. The higher the

sensitivity, the smaller the sound can be detected, that is, the screen

can be lit when a very small sound.

4.36Other settings

Select other settings, the menu as shown in the ﬁgure appears:

The functions of each icon :

Screen brightness adjustment. The brightness can be

adjusted by the up and down keys.

creen time setting. The screen time can be set to 1 minute,

3 minutes, 5 minutes, oﬀ.

Time setting

Temperature unit setting. The switchable temperatureunits

are Celsius and Fahrenheit.

Anti-ﬂash mode setting, set diﬀerent frequencies 60Hz, 50Hz

5.Installation

5.1Put the TX camera on the working table at the corresponding

height. where the baby can be monitored , and adjust the angle

of TX camera.

5.2Fixed on the wall with a three-foot bracket and adjust the angle.

6.Maintenance of the monitor

6.1Lens maintenance and cleaning: Please do not touch the lens

with your hands or other dirt to ensure the picture is clear and bright.

When the lens is dirty, wipe it gently with clean gauze.

6.2Product surface cleaning: Wipe the body and LCD display

regularly with a clean, soft gauze.

6.3Product disassemble: Please do not open the machine or repair

it yourself.

6.4Keep dry:Please do not use the product in a humid environment,

otherwise it may cause product failure.

Media BM05 User manual

Brand: Media

Model: BM05

Category: Baby video monitors

Type: User manual

Download PDF

report

Media BM05 User manual

Media BM05 User manual

Other documents