Multimedia Keyboard
User Manual Hotkey Driver Installation English
LINDY Art.No. 20555 GERMAN
20556 ITALIAN
20557 FRENCH
20558 ENGLISH (GB)
www.LINDY.com
© LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH - FIRST EDITION (FEB 2001)
English Manual
I. Install Hot Keys 6.00 driver
(1) Insert the enclosed diskette with the keyboard into the
disk driver (A: or B:)
(2) In Windows 98 (for example), click on “My
Computer”
(3) Click on “3.5’ Disk”
(4) Click on executable file “Setup.exe”
(5) Follow the instruction on the screen to complete the
installation
(6) To uninstall the Hot Keys 6.00, go to
START/PROGRAM FILE/HOT KEYS, select
“Uninstall” to remove the Hot Keys 6.00 driver.
HOT KEYS FUNCTIONS
1.
BACK: go back to previous page
2.
FORWARD: go to the next web, provided you
have viewed it just previously.
3.
STOP: stop loading or refreshing a new page, if it
takes a long time to display.
4.
REFRESH: update the content on a page.
5.
SEARCH: open the “Find” window in the START
taskbar, if the internet browser program is already running,
press this key will go to the default search service.
6.
FAVORITES: open the “Favorites” group.
7.
WEB/HOME: Start your default browser and go
immediately to your Home Web page. Return to your
Home Web page when the browser is already running.
8.
MAIL: starts your e-mail program.
9. SLEEP: start the screen saver program or power
down the computer (base to the computer system)*
10.
MUTE: Stops all audio. Press again to resume audio.
11.
VOL-: Press and release, or press and hold to
decrease the volume.
12.
VOL+: Press and release, or press and hold to
increase the volume
13.
PLAY/PAUSE: Plays and pauses the media.
Once paused, press again to resume play.
14.
STOP: Stops the media. Press the Play Hot Key to
resume playing the media.
15.
PREVIOUS TRACK: Changes to the previous
media track. Press once for each preceding media track.
16.
NEXT TRACK: Changes to the next media
track. Press once for each subsequent media track.
17.
MEDIA: start the music CD player or Microsoft
Media Player program.
18.
MY COMPUTER: open the “My Computer”
window
19.
CALCULATOR: start the “CALCULATOR”
program
* The SLEEP function key for power management system
requirements:
1. IBM compatible with ATX system
2. The BIOS of main board support Windows 98 ACPI
power management keys
3. Microsoft Windows 98 operating system or higher
III. How to Re-define the HOTKEYS
First, you will need to install the HOTKEYS' driver, which
is the floppy disk that comes with the keyboard.
After that you will see a keyboard icon at right bottom of
your screen. These icons will comes out every time when
you start the computer.
The HOT KEYS are already set up once you installed the
driver. If you want to redefined the HOTKEY, you have to
click on the keyboard icon where is at the right bottom
screen.
After you see a keyboard properties' window. Then go to
the HOT KEYS section. You will see a screen, which has
mention keywords on it, and you will see 19 buttons looks
just like the buttons on your keyboard.
Every time you want to re-define the HOT KEY just click
on the button, and then go to custom, then click on the
select button. Then you will have to go to Browse File to
find out the file, which you want to set up on your HOT
KEYS. After you finished it click on OK bottom, then
click on APPLY bottom, then close the keyboard
properties' window.
After you finish all the steps, the HOT KEYS would
function as you wished.