With a 4”or 5” taping knife, apply
a smooth, liberal coat of all-purpose
compound to corner.
Use a stainless steel mud pan to carry and
re-mix compound as you work. Keeping your
compound smooth and free of air pockets
and dried clumps of compound, will deliver
a smooth finish.
1
3
4
2
2
PREPARATION
FILL COAT
FINISH COAT
INSTALLATION
INSTALLATION
1
2
3
1
2
DIRECTIONS FOR USE
Most professionals prefer to cut the ends
of Big-Stick at a 45º angle.
Properly mix all-purpose compound per
manufacturer’s directions. If applying
Strait-Flex tapes over painted surfaces, add
Strait-Flex’s Super-Bond or latex paint to
compound to enhance bondability.
Run your taping knife over the surface of
the drywall and remove any high spots. If
the knife hits a screw head, set the screw
a little deeper. Use a drywall rasp to clean
up edges, if needed. Measure wall height
and subtract 1/2”. Measure and cut Big-
Stick using a scissors or utility knife.
Press Big-Stick into the wet compound.
Adjust if necessary to create a straight line.
For high volume applications, use Big-
Stick
333
Rolling Tool for fast installation
and squaring up corner beads. Available at
straitflex.com.
Wipe down tight with taping knife using a
little additional pressure on the outer edges
of Big-Stick. Immediately apply a light
skim coat of compound over surface. Wipe
down tight and smooth. Let dry completely
over several hours or overnight.
With a 6”or 8” taping knife, apply your
final coat of compound feathering the
compound beyond previous coat. Let
dry completely over several hours or
overnight.
Sand lightly with 120 grit sandpaper. Big-
Stick will not fuzz-up like paper or mesh
tapes.
Have a five-gallon bucket of water with a
durable sponge handy for cleaning tools.
When painting, apply a base coat of drywall
primer to seal the compound and assure an
even paint finish.
-
1
ClarkDietrich BS-10 Installation guide
- Type
- Installation guide
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Strait-Flex SM-100 Specification
-
Strait-Flex SO-100 User manual
-
-
-
-
ToughRock 012238 Installation guide
-
-
ToughRock 7437 Installation guide
-
-
