Strait-Flex SM-100 Specification

SM-100
Strait-Flex
Brand
Strait-Flex
Model
SM-100
Type
Specification

This manual is also suitable for

Strait-Flex SM-100S is a professional-grade drywall tape designed for inside corners and angled corners. It is twice as strong as paper or mesh tapes and can be installed twice as fast. It straightens minor framing irregularities, resists dents, paint chipping, shrinkage, and common cracking problems. It is rustproof and can be cut easily with a knife or scissors.

Strait-Flex SM-100S is a professional-grade drywall tape designed for inside corners and angled corners. It is twice as strong as paper or mesh tapes and can be installed twice as fast. It straightens minor framing irregularities, resists dents, paint chipping, shrinkage, and common cracking problems. It is rustproof and can be cut easily with a knife or scissors.

P R O F E S S I O N A L G R A D E
APPLICATIONS
n Inside 90º corners and angled corners.
n Inside angles of bay windows.
n Commercial “Top Out” applications where
drywall meets concrete ceilings.
n Inside ceiling corners.
PRODUCT DESCRIPTION
n Produced straight, strong, and professional
inside corners.
n Two times stronger than paper or mesh tapes.
n Twice as fast as paper or mesh tapes.
n Slotted edges ensure superior bond.
n Straightens minor framing irregularities for
vertical corners.
n Resists dents, paint chipping, shrinkage, and
common cracking problems.
n Rustproof.
n Cuts easily with knife or scissors.
n Installs using standard compounds. No special
tools or fasteners needed. No nail pops.
n Second coat of compound can be applied
immediately – very light skim-coat to finish.
n Slightly thinner than Strait-Flex’s Original.
Straighter, Stronger,
Twice as Fast
Half the Work!
I N S I D E C O R N E R D R Y W A L L T A P E
medium
L870412
P H O N E : 8 8 8 - 7 4 7 - 0 2 2 0
medium
DIRECTIONS FOR USE
1 Cut Strait-Flex MEDIUM to desired length. Fold MEDIUM in half at center crease with
print side facing each other. For inside corners, fold less than desired angle with print
side facing out.
2 Using a 4”or 5” taping knife, apply a smooth, liberal coat of compound to corner.
3 Press MEDIUM into wet compound. Adjust if necessary to create a straight line.
Wipe down tight with taping knife using a little additional pressure on the outer
edges of MEDIUM. Immediately apply a light skim coat of compound over surface
of MEDIUM. Wipe down tight and smooth. Let dry completely over several hours or
overnight.
4 Apply very light finish coat, let dry, and sand.
REPAIRS OVER PAINTED SURFACES. Strait-Flex recommends the use of
Strait-Flex Super-Bond or latex paint, mixed with all-purpose joint compound, for
enhanced bondability.
ADVANTAGES OVER COMPETITORS
STRAIT-FLEX COMPETITOR
MEDIUM PAPER TAPES
Straightens Common Conforms to Framing
Drywall Imperfections Imperfections. Rounds
In Corners Out When Drying.
Will Not Soften or Sag Softens and Sags When Wet
Two Times Stronger Tends to Hairline Crack with Temperature
Than Paper Tape Change or Structural Movement
No Blisters or Fuzz-Ups Fuzzes Up During Sanding
Superior Bonding Good Bonding
Ideal for Novice or Pro Requires Skill or a Professional
n
2
1
/4” x 50’ roll size.
n
Color Code GREEN
n
Item# SM-50
UPC 6-56690-13125-0
n
RETAIL PKG
Case Item# SM-50-6
6rls per tray. One tray
per case. (6-Pack)
Case weight: 8.5 lbs.
48 cases per pallet.
n
RETAIL PKG
Case Item# SM-50-12
6rls per tray. Two trays
per case. (12-Pack)
Case weight: 16.4 lbs.
24 cases per pallet.
n
2
1
/4” x 100’ roll size.
n
Color Code GREEN
n
Item# SM-100
UPC 6-56690-12556-3
n
RETAIL PKG
Case Item# SM-100-R
6rls per tray. Two trays
per case. (12-Pack)
Case weight: 31 lbs.
24 cases per pallet.
n
WHOLESALE PKG
Case Item# SM-100C
12rls per case.
Case weight: 30 lbs.
24 cases per pallet.
SPECIFICATIONS
STORAGE
Store in a dry place protected from moisture.
Check out our website at www.straitflex.com
  • Page 1 1
  • Page 2 2

Strait-Flex SM-100 Specification

SM-100
Strait-Flex
Brand
Strait-Flex
Model
SM-100
Type
Specification
This manual is also suitable for

Strait-Flex SM-100S is a professional-grade drywall tape designed for inside corners and angled corners. It is twice as strong as paper or mesh tapes and can be installed twice as fast. It straightens minor framing irregularities, resists dents, paint chipping, shrinkage, and common cracking problems. It is rustproof and can be cut easily with a knife or scissors.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents