INFORMATION SHEET Phone: 888-747-0220
Directions for Use
1 Lightly sand area to be repaired.
2 Apply all-purpose joint compound 1/8” thick directly to back of patch. Place
patch over center of repair and wipe down flat to wall with a taping knife.
Immediately skim-coat patch and let dry dry. Compound that remains on back
side of ULTRA-PATCH makes patch very rigid.
3 Apply second coat, let dry and sand. ULTRA-PATCH will not fuzz up during
sanding
REPAIRS OVER PAINTED SURFACES. Strait-Flex recommends the use of
Strait-Flex Super-Bond or latex paint, mixed with all-purpose joint compound, for
enhanced bonding strength.
Specifications (Two Packs)
Warranty
Strait-Flex tapes are backed by a three year warranty. When applied to a sound
structure, built on a permanent foundation using recommended application
techniques, we warrant that these products will not edge-crack for a period of
three years from the date of purchase. Strait-Flex International, Inc. will match
any manufacturer’s warranty on a similar product. Contact Strait-Flex
International, Inc. for complete details.
Storage
Store in a dry place protected from moisture.
Check out our website at www.straitflex.com
n 6” Diameter
n
Color Code YELLOW
n Item# ULTP-2PKS
UPC 6-56690-52370-3
n
RETAIL PKG
CASE ITEM# ULTP-2PK
50 Cards of 2
Case weight: 8 lbs.
24 cases per pallet.
n 6” Diameter
n
Color Code YELLOW
n Item# ULTP-10PK
UPC 6-56690-52372-7
n
RETAIL PKG
CASE ITEM# ULTP-100
10 bags of 10
Case weight: 14 lbs.
24 cases per pallet.
n
WHOLESALE PKG
CASE ITEM# ULTP-500
50 bags of 10
Case weight: 70 lbs.
24 cases per pallet.
Specifications (Ten Packs)
6”
15.25cm
ultra
-
patch