Ameriwood Home 2758305COM Assembly Manual

2758305COM

Nightstand

- Unit can tip over causing severe injury or death.

- Anchor unit to stud in wall (if instructed to).

- Do Not allow children to climb on unit.

- Put heavy items on lower shelves or drawers.

B342758305COM0

THIS INSTRUCTION BOOKLET CONTAINS

IMPORTANT

SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.

WARNING

Follow Ameriwood Home

Tube

You

Date of Purchase ___ / ___ / ___

Lot Number:

Do Not Return This Product!

Contact our customer service team for help first.

Call: 1-800-489-3351 (toll free)

Monday-Friday 9am - 5pm CST

Visit: www.ameriwoodhome.com

Assembly Difficulty Meter

Easy

Tough

Contact Us!

Helpful Hints

2

ameriwoodhome.com

Do NOT return this product!

Contact our friendly customer service team first for help.

Call us!

1-800-489-3351

Monday-Friday

9am - 5pm CST

Visit ameriwoodhome.com to view the

limited warranty valid in the U.S. and Canada.

Assembly Tips

- Open your item in the area you plan to keep it to avoid excessive heavy lifting.

- Identify, sort and count the parts before attempting assembly.

- Compression dowels are lightly tapped in with a hammer.

- Slides are labeled with a

R

(right) and

L

(left) for proper placement.

- Make sure to always face the point on the top of the Cam Lock towards the

outer edge.

- Use all the nails provided for the back panel and spread them out equally.

- Back panel must be used to make sure your unit is sturdy.

- Do NOT use harsh chemicals or abrasive cleaners on this item.

- Never push, pull, or drag your furniture.

Tube

You

Tube

You

PEOPLE NEEDED FOR ASSEMBLY: 1-2

ESTIMATED ASSEMBLY TIME: 1 HOUR

3

ameriwoodhome.com

Before You Start

P

Q

u

i

c

k

T

i

p

A

s

e

m

bl

y

P

Cam Lock Fastening System

This Cam Lock Fastening System will be used throughout the assembly process.

1

3

2

4

Tube

You

Read through each step carefully and follow the proper order

Separate and count all your parts and hardware

Give yourself enough room for the assembly process

Have the following tools: Flat Head Screwdriver, #2 Phillips Head

Screwdriver and Hammer

Caution: If using a power drill or power screwdriver for screwing,

please be aware to slow down and stop when screw is tight.

Failure to do so may result in stripping the screw.

P

4

ameriwoodhome.com

Board Identification

Not actual size

Tube

You

Left Panel

35780305010

Right Panel

35780305020

Top

35780305030

Bottom

35780305040

Kick

35780305050

Front Leg (2)

35780305060

Rear Leg (2)

35780305070

Drawer Front

35780305081

Drawer Bottom

35780331090

Back Panel

K578030500

Drawer Back

35780331100

This piece is paperboard construction.

It is not made from wood, but is

required for the assembly of your unit.

A

G

D

B

X

C

E

F

I

H

J

V

W

Left Drawer Side

36858331220

Right Drawer Side

36858331230

5

ameriwoodhome.com

Board Identification

Not actual size

Tube

You

A

E

H

B

C

I

D

G

F

X

F

G

This piece is paperboard construction.

It is not made from wood, but is

required for the assembly of your unit.

J

V

W

6

ameriwoodhome.com

Part List

Actual Size

Tube

You

Not Actual Size

(x8)

#A22570

cam lock

(x8)

#A22510

cam bolt

(x4)

#A21660

wood dowel

(x10)

#A22900

connector

(x10)

#A22910

connector bolt

(x8)

#A21110

nail

(x4)

#A11600

#6x1-1/4" screw

(x10)

#A12120

8x7/16" screw

(x10)

#A11080

6x7/16" screw

2

3

4

5

6

8

9

(x2)

#A54213

drawer bracket

(x1)

#A56770

slide set

Left Cabinet Member

Right Cabinet Member

Left Drawer Member

Right Drawer Member

11d

11c

11b

11a

11

7

1

7

ameriwoodhome.com

STEP

1

(x4)

#A22900

You will need to tap the connector (4) with a hammer to fully insert. Be sure

the connector is positioned as shown before pushing into holes.

4

A

4

8

ameriwoodhome.com

STEP2

4

(x4)

#A22900

B

You will need to tap the connector (4) with a hammer to fully insert. Be sure

the connector is positioned as shown before pushing into holes.

4

9

ameriwoodhome.com

STEP3

5

F

G

F

G

5

(x8)

#A22910

10

ameriwoodhome.com

STEP

4

A

G

F

Turn screw clockwise to

lock in place.

End View

11

ameriwoodhome.com

STEP

5

F

B

G

4

Turn screw clockwise to

lock in place.

End View

12

ameriwoodhome.com

STEP6

2

3

9

(x2)

#A22570

(x2)

#A22510

(x1)

#A21660

(x3)

#A11080

Left Cabinet Member

A

2

3

2

1

9

11a

Marked with an "L"

11a

1

Proper orientation of CAM LOCK

Tip

Assembly

Quick

13

ameriwoodhome.com

STEP

7

2

3

9

(x3)

#A11080

(x1)

#A21660

(x2)

#A22510

(x2)

#A22570

Right Cabinet Member

11b

B

2

3

2

9

11b

Marked with an "R"

Proper orientation of CAM LOCK

Tip

Assembly

Quick

1

14

ameriwoodhome.com

STEP8

3

(x4)

#A22570

(x2)

#A21660

(x2)

#A22900

3

1

4

You will need to tap the connector (4) with a hammer to fully insert. Be sure

the connector is positioned as shown before pushing into holes.

4

D

3

Proper orientation of CAM LOCK

Tip

Assembly

Quick

1

15

ameriwoodhome.com

STEP9

5

E

D

(x2)

#A22910

4

Turn screw clockwise to

lock in place.

16

ameriwoodhome.com

STEP10

A

D

B

D

U

N

L

O

C

K

L

O

C

K

17

ameriwoodhome.com

STEP

11

2

(x4)

#A22510

C

18

ameriwoodhome.com

STEP12

A

B

C

19

ameriwoodhome.com

STEP13

6

8

(x8)

#A21110

(x6)

#A12120

Assure that the unit is square.

Distance from corner to corner

must be equal as shown.

Attach the back panel so that the

bottom edge is even with the

bottom and aligned side to side.

6

8

IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT AND MUST BE

INSTALLED PROPERTY.

1. With the help of another person, carefully turn the unit over.

2. Start with securing back panel with screws (8), but do not tighten.

3. Secure back panel by nailing straight into the back edges as shown.

4. Tighten screws (8).

F

G

F

unfinished

surface

X

20

ameriwoodhome.com

STEP

14

(x2)

#A54213

Bracket Orientation

10

V

W

10

Lay the drawer sides down on a flat surface. Line up the drawer bracket with the holes in

the drawer side as shown. Using a hammer, tap each drawer bracket stem part way into

each hole. Repeat this process until the drawer bracket is fully seated on the drawer side.

Page is loading ...

Ameriwood Home 2758305COM Assembly Manual

Ameriwood Home 2758305COM Assembly Manual

in other languages

Related papers

Other documents