GOLDMUND Micro Metis Active Wireless – 6
3 SELECTING THE SPEAKER LOCATION
To achieve optimal performance, please observe the following points:
• The Micro Metis Active Speakers and the USB dongle should be placed in the same room.
• There should be no metallic obstacles between the USB dongle and the Micro Metis Active
Speakers, which could influence the wireless link.
• The computer with the USB dongle should not be moved around during playback.
Wireless audio link range:
The range of the wireless audio link depends on several factors, such as the amount of WiFi
equipment used in proximity of the Micro Metis Active Speaker system, as well as the building
materials and the architecture of the room.
Depending on the above mentioned factors, the maximum range will normally be from 5 to 20 meters.
4 CONNECTING THE MICRO METIS
To use the Micro Metis follow these steps:
• Position the left and right speakers according to the labels indicating the channel located on
the bottom side of each speaker. The speaker with the label L should be on the left and the
one with the label R on the right.
• Connect the speakers to a mains outlet using the power cords contained in the box.
• Connect the USB dongle to a USB port on your computer.
• In your computer’s audio settings, select the USB dongle as the audio output.
The system is now set up and ready to be used. The volume is set directly on the computer.
ATTENTION
Due to the high gain of the Micro Metis
Wireless speaker, please make sure
that the media player is set to a low
output level, before connecting the
dongle to the computer.