GoVideo TA2050 Quick Reference Manual

Type
Quick Reference Manual
Welcome
Congratulations on your purchase of this GoVideo LCD TV. This Quick Reference Guide will
help you get started. Before you begin, make sure the following accessories are included with
your LCD TV:
1
Remote Control
2
AAA Batteries (2)
3
Power Cable
4
Registration Card
5
AC Adapter
6
AV Cable
7
User’s Guide
Quick Reference
Basic Setup & Operations
TA2050
Step 1 - Insert the Remote Control Batteries
Install the supplied batteries, paying attention to the correct polarities.
Step 2 - Connect the Power Cable
1
Connect the supplied AC Adapter to the Power DC
12V jack on the back of the LCD TV.
2
Connect the supplied power cable to the AC
Adapter.
3
Plug the power cable into a standard wall outlet.
1
2
3
4
5
6
7
1 2 3
TA2050 QRG 2-9-05.indd 1 2/17/2005 9:40:13 AM
©2005 GoVideo. All rights reserved. Printed in China.
GoVideo is a registered trademark. All other brand and product names are trademarks or registered trademarks of their respective companies.
Step 3 - Connect to an Antenna/Cable
Connect the LCD TV to your antenna or cable/satellite hookup as shown.
Step 4 - Turn on the TV
1
Turn the front panel power switch downward to
turn on the TV.
The Power/Standby light turns off.
2
Turn the power switch up to turn off the TV.
The Power/Standby light turns blue.
Step 5 - Search for Channels
1
Press MENU on the remote control.
2
Select Setup > Antenna.
Choose TV if you have an antenna.
Choose CATV if you have cable.
3
Select Setup > Auto.
The LCD TV will automatically search for all
available channels.
To add or delete channels, see the User’s
Guide.
Step 6 - Select Channels/Inputs
You can select antenna channels 2-69 or cable
TV channels 1-125 on your LCD TV. To select a
channel, use the TV CH +/- buttons, or use the
number keys as follows:
To select a 1- or 2-digit channel
number (e.g., channel 5)
1
Press the 0 button.
2
Press the 5 button.
* or simply press the 5 button.
To select a 3-digit channel number
(e.g., channel 115)
Complete the following steps within 4 seconds.
1
Press the 100 button.
2
Press the 1 button.
3
Press the 5 button.
Note: Three-digit channel numbers can only be
selected when Antenna is set to CATV in the menu
system; see the User’s Guide for details.
To switch inputs
Press TV/VIDEO on the front panel to change
the on-screen view to TV, Video, S-Video, or
Component.
You can also directly select any input by
pressing TV, LINE (Video), S-VIDEO, or
COMPONENT on the remote control.
Step 7 - Adjust the Volume
Press the VOL+/- buttons to adjust the volume.
To mute the sound, press
MUTE.
Step 8 - Adjust the Screen Angle
To set the LCD TV to a comfortable viewing angle,
tilt the screen forward or backward. You can also
rotate the screen side to side.
IN OUT
AUDIO
S-VIDEOVIDEO
L
R
OUTPUT
RF
Connect to Cable Box or
Satellite Receiver
Connect to Antenna
or Basic Cable
RF Cable
TA2050 QRG 2-9-05.indd 2 2/17/2005 9:40:15 AM
  • Page 1 1
  • Page 2 2

GoVideo TA2050 Quick Reference Manual

Type
Quick Reference Manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI