VIA Technologies VB9001 User manual

VIA Technologies
Brand
VIA Technologies
Model
VB9001
Type
User manual
USER MANUAL
VB9001
High-integrated low-power plaorm
ideal for network rewall and router
applicaons
1.00-03142018-101000
Copyright
Copyright ©2017-2018 VIA Technologies Incorporated. All rights reserved.
No part of this document may be reproduced, transmied, transcribed, stored in a retrieval system, or translated into any language, in any
form or by any means, electronic, mechanical, magnec, opcal, chemical, manual or otherwise without the prior wrien permission of
VIA Technologies, Incorporated.
Trademarks
All trademarks are the property of their respecve holders.
Disclaimer
No license is granted, implied or otherwise, under any patent or patent rights of VIA Technologies. VIA Technologies makes no warranes,
implied or otherwise, in regard to this document and to the products described in this document. The informaon provided in this
document is believed to be accurate and reliable as of the publicaon date of this document. However, VIA Technologies assumes no
responsibility for the use or misuse of the informaon (including use or connecon of extra device/equipment/add-on card) in this
document and for any patent infringements that may arise from the use of this document. The informaon and product specicaons
within this document are subject to change at any me, without noce and without obligaon to nofy any person of such change.
VIA Technologies, Inc. reserves the right the make changes to the products described in this manual at any me without prior noce.
Regulatory Compliance
FCC-A Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable protecon against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instrucon manual, may cause harmful interference to radio communicaons. Operaon of this equipment in a residenal area is likely to
cause harmful interference, in which case the user will be required to correct the interference at his personal expense.
Noce 1
The changes or modicaons not expressly approved by the party responsible for compliance could void the user's authority to operate
the equipment.
Noce 2
Shielded interface cables and A.C. power cord, if any, must be used in order to comply with the emission limits.
Noce 3
The product described in this document is designed for general use, VIA Technologies assumes no responsibility for the conicts or
damages arising from incompability of the product. Check compability issue with your local sales representaves before placing an
order.
Baery Recycling and Disposal
• Only use the appropriate baery specied for this product.
• Do not re-use, recharge, or reheat an old baery.
• Do not aempt to force open the baery.
• Do not discard used baeries with regular trash.
• Discard used baeries according to local regulaons.
Safety Precauons
• Always read the safety instrucons carefully.
• Keep this User’s Manual for future reference.
• All cauons and warnings on the equipment should be noted.
• Keep this equipment away from humidity.
• Lay this equipment on a reliable at surface before seng it up.
• Make sure the voltage of the power source and adjust properly 110/220V before connecng the
equipment to the power inlet.
• Place the power cord in such a way that people cannot step on it.
• Always unplug the power cord before inserng any add-on card or module.
• If any of the following situaons arises, get the equipment checked by authorized service
personnel:
• The power cord or plug is damaged.
• Liquid has penetrated into the equipment.
• The equipment has been exposed to moisture.
• The equipment has not worked well or you cannot get it work according to User’s Manual.
• The equipment has dropped and damaged.
• The equipment has obvious sign of breakage.
• Do not leave this equipment in extreme temperatures or in a storage temperature above 70°C (158°F). The
equipment may be damaged.
• Do not leave this equipment in direct sunlight.
• Never pour any liquid into the opening. Liquid can cause damage or electrical shock.
• Do not place anything over the power cord.
• Do not cover the venlaon holes. The openings on the enclosure protect the equipment from
overheang
VB9001 User Manual
Box Contents
• 1 x VB9001 board
• 1 x SATA cable with SATA power
• 1 x VGA cable
Ordering Informaon
Part Number Descripon
VB9001-10E 3.5” SBC Board with 1.06GHz VIA Eden® X1 CPU, VGA, 4 USB 2.0, COM, DIO,
5 Gigabit Ethernet, SATA, CFast slot, 5V DC-in
Oponal Accessories
Wireless Accessories
Part Number Descripon
00GO27100BU2B0D0 VNT9271 IEEE 802.11 b/g/n USB Wi-Fi dongle
EMIO-5531-00A1 VAB-820-W IEEE 802.11 b/g/n USB Wi-Fi & Bluetooth module with assembly kit and
antenna
iv
VB9001 User Manual
Table of Contents
1. Product Overview ............................................................................................................... 1
1.1 Key Features ......................................................................................................................................... 1
1.2 ProductSpecicaons ......................................................................................................................... 2
1.3 Layout Diagram .................................................................................................................................... 4
1.4 Product Dimensions ............................................................................................................................ 5
1.5 HeightDistribuon ............................................................................................................................... 6
2. ExternalI/OPinDescriponsandFunconality .................................................................. 7
2.1 COM port .............................................................................................................................................. 7
2.2 Gigabit Ethernet Port ............................................................................................................................ 7
2.3 DC-in Jack ............................................................................................................................................ 8
3. Onboard I/O ....................................................................................................................... 9
3.1 USB 2.0 Pin Header ............................................................................................................................... 9
3.2 Front Panel Pin Header ........................................................................................................................ 9
3.3 SPI Connector ..................................................................................................................................... 10
3.4 LPC Pin Header ................................................................................................................................... 10
3.5 GPIO Pin Header ................................................................................................................................ 11
3.6 VGA Pin Header ................................................................................................................................. 11
3.7 SATA Connector .................................................................................................................................. 12
3.8 SATA Power Connector ...................................................................................................................... 12
3.9 Fan Connector ................................................................................................................................... 13
3.10 CMOSBaeryConnector................................................................................................................... 13
3.11 CFast Slot ............................................................................................................................................ 14
4. Onboard Jumpers ............................................................................................................. 15
4.1 Clear CMOS Jumper ............................................................................................................................ 16
5. HardwareInstallaon ...................................................................................................... 17
5.1 Suggested minimum chassis dimensions ........................................................................................... 17
5.1.1 Suggested minimum chassis dimensions ..................................................................................... 17
5.1.2 Suggested minimum chassis height ............................................................................................. 18
5.1.3 Suggested keepout areas ............................................................................................................. 19
6. BIOSSetupUlity ............................................................................................................. 20
6.1 EnteringtheBIOSSetupUlity .......................................................................................................... 20
6.2 Control Keys ........................................................................................................................................ 20
6.3 NavigangtheBIOSMenus ............................................................................................................... 20
6.4 GengHelp ....................................................................................................................................... 20
6.5 Main Menu ........................................................................................................................................ 21
6.5.1 BIOSInformaon ......................................................................................................................... 21
6.5.2 MemoryInformaon ................................................................................................................... 21
6.5.3 System Language ......................................................................................................................... 21
6.5.4 System Date ................................................................................................................................. 21
6.5.5 System Time ................................................................................................................................. 21
6.6 AdvancedSeng ............................................................................................................................... 22
6.6.1 S5RTCWakeSengs ................................................................................................................... 23
6.6.1.1 Wake System with Fixed Time ........................................................................................... 23
6.6.1.1.1 Wake up hour .............................................................................................................. 24
6.6.1.1.2 Wake up minute .......................................................................................................... 24
6.6.1.1.3 Wake up second .......................................................................................................... 24
6.6.1.2 Wake system with Dynamic Time ...................................................................................... 24
6.6.2 CPUConguraon ................................................... ..................................................................... 25
6.6.3 IDEConguraon ......................................................................................................................... 26
6.6.4 ClockGeneratorConguraon .................................................................................................... 27
6.6.4.1 CPU Spread Spectrum........................................................................................................ 27
6.6.4.2 PCIe Spread Spectrum ....................................................................................................... 27
v
vi
VB9001 User Manual
6.6.5 BoardConguraon ..................................................................................................................... 28
6.6.5.1 S5 Wake On LAN ................................................................................................................ 28
6.7 ChipsetSengs .................................................................................................................................. 29
6.7.1 DRAMConguraon .................................................................................................................... 30
6.7.1.1 DRAM Clock ....................................................................................................................... 30
6.7.1.2 VGAShareMemory(FrameBuer) ................................................................................... 30
6.7.2 Watchdog Timer Control ................................................... ........................................................... 31
6.7.2.1 Watchdog Timer Enable .................................................................................................... 31
6.7.2.2 Watchdog Timer Run/Stop ................................................................................................ 31
6.7.2.3 WatchdogTimerAcon .................................................................................................... 31
6.7.2.4 Watchdog Timer Count ...................................................................................................... 31
6.8 BootSengs ...................................................................................................................................... 32
6.8.1 Setup Prompt Timeout ................................................................................................................ 32
6.8.2 Bootup NumLock State ................................................................................................................ 32
6.8.3 Quiet Boot ................................................................................................................................... 32
7. SowareandTechnicalSupport ........................................................................................ 33
7.1 MicrosoWindows&QNXSupport ................................................................................................... 33
7.2 VIA Smart ETK ..................................................................................................................................... 33
7.3 Technical Supports and Assistance ..................................................................................................... 33
Appendix. A. Installing Wireless Accessories ............................................................................ 34
A.1. InstallingEMIO-5531USBWi-Fi&Bluetoothmodule ........................................................................ 34
VB9001 User Manual
List of Figures
Figure1: LayoutdiagramoftheVB9001(backpanelI/O) .................................................................................. 4
Figure2: LayoutdiagramoftheVB9001(rightside) ............................................................................................ 4
Figure3: LayoutdiagramoftheVB9001onboard(topside) ............................................................................... 4
Figure4: LayoutdiagramoftheVB9001onboard(boomside) ......................................................................... 4
Figure5: MounngholesanddimensionsoftheVB9001 ................................................................................... 5
Figure6: ExternalI/OportdimensionsoftheVB9001(backpanel) ................................................................... 5
Figure7: ExternalI/OportdimensionsoftheVB9001(rightside) ..................................................................... 5
Figure8: HeightdistribuonoftheVB9001(topside) ........................................................................................ 6
Figure9: HeightdistribuonoftheVB9001(boomside) .................................................................................. 6
Figure 10: COM port diagram ...................................................................................................... .......................... 7
Figure 11: Gigabit Ethernet port ............................................................................................................................ 7
Figure 12: DC-in jack diagram ................................................................................................................................ 8
Figure13:DC-injackspecicaondiagram .......................................................................................................... 8
Figure 14: USB 2.0 pin header diagram ................................................................................................................. 9
Figure 15: Front panel pin header diagram ........................................................................................................... 9
Figure 16: SPI connector diagram ....................................................................................................................... 10
Figure 17: LPC pin header diagram ..................................................................................................................... 10
Figure 18: GPIO pin header diagram ................................................................................................................... 11
Figure 19: VGA pin header diagram .................................................................................................................... 11
Figure 20: SATA connector diagram...................................................................................................................... 12
Figure 21: SATA power connector diagram ......................................................................................................... 12
Figure 22: Fan connector diagram........................................................................................................................ 13
Figure23:CMOSbaeryconnectordiagram ...................................................................................................... 13
Figure 24: CFast slot diagram .............................................................................................................................. 14
Figure25:Jumpersengsexample ...................................................................................................... ............... 15
Figure 26: Clear CMOS jumper diagram .............................................................................................................. 16
Figure 27: Suggested minimum chassis dimensions ............................................................................................ 17
Figure28:Suggestedminimumchassisheight(topside) .................................................................................... 18
Figure29:Suggestedminimumchassisheight(boomside) .............................................................................. 18
Figure 30: Suggested keepout top areas .............................................................................................................. 19
Figure31:Suggestedkeepoutboomareas ........................................................................................................ 19
Figure32:IllustraonoftheMainmenuscreen .................................................................................................. 21
Figure33:IllustraonoftheAdvancedSengsscreen ....................................................................................... 22
Figure34:IllustraonofS5RTCWakeSengsscreen ........................................................................................ 23
Figure35:IllustraonofWakeSystemwithFixedTimescreenwhenEnabled ................................................... 23
Figure36:IllustraonofWakeSystemwithDynamicTimescreenwhenEnabled .............................................. 24
Figure37:IllustraonofCPUConguraonscreen ............................................................................................. 25
Figure38:IllustraonofIDEConguraonscreen .............................................................................................. 26
Figure39:IllustraonofClockGeneratorConguraonscreen .......................................................................... 27
Figure40:IllustraonofboardConguraonscreen .......................................................................................... 28
Figure41:IllustraonofChipsetSengsscreen ................................................................................................. 29
Figure42:IllustraonofDRAMConguraonscreen .......................................................................................... 30
Figure43:IllustraonofVideoConguraonscreen ........................................................................................... 31
Figure44:IllustraonofBootSengsscreen ..................................................................................................... 32
Figure 45: Installing EMIO-5531 to the chassis ................................................................................................... 34
Figure46:ConnecngUSBcableWi-Ficable ...................................................................................................... 34
Figure 47: Installing Wi-Fi antenna cable and antenna ........................................................................................ 35
Figure48:ConnecngtheWi-Fiantennacabletothemicro-RFconnector ........................................................ 35
vii
VB9001 User Manual
List of Tables
Table 1: COM port pinouts .................................................................................................................................. 7
Table 2: Gigabit Ethernet port pinouts ............................................................................................................... 7
Table3: GigabitEthernetportLEDcolordenions .......................................................................................... 8
Table 4: DC-in jack pinouts ................................................................................................................................. 8
Table5: DC-injackspecicaonpinouts ........................................................................................................... 8
Table 6: USB 2.0 pin header pinouts ................................................................................................................... 9
Table 7: Front panel pin header pinouts ............................................................................................................ 9
Table 8: SPI connector pinouts ........................................................................................................................ 10
Table 9: LPC pin header pinouts ...................................................................................................................... 10
Table 10: GPIO pin header pinouts .................................................................................................................... 11
Table 11: VGA pin header pinouts ..................................................................................................................... 11
Table 12: SATA connector pinouts....................................................................................................................... 12
Table 13: SATA power connector pinouts .......................................................................................................... 12
Table 14: Fan connector pinouts......................................................................................................................... 13
Table15: CMOSbaeryconnectorpinouts ....................................................................................................... 13
Table 16: CFast slot pinouts ............................................................................................................................... 14
Table17: ClearCMOSjumpersengs................................................................................................................ 16
viii
1
VB9001 User Manual
1. Product Overview
Based on a highly compact 3.5” SBC form factor, the VIA VB9001 combines the advanced performance of the
fanless1.06GHzVIAEden®X1processorwiththeenhancedmulmediacapabiliesoftheVIAVX900media
systemprocessor.TheVIAVB9001featuresofveGigabitEthernetports,whichmakesitanidealplaormfor
networksecurity,distributedcontrolsystem(DCS),andmonitoringapplicaons.
Measuring just 146mm x 102mm, the VIA VB9001 includes 1GB DDR3 SDRAM onboard and features a unique
setofI/Oandconnecvityoponsidealforhigh-speedM2MandIPcameraapplicaons,includingtwoUSB
2.0ports,veGigabitEthernetports,andoneCOMport,aswellasonboardpinheadersforVGAandDIO(4
GPI+4GPO).ThestorageoponsincludeoneSATAconnectorandoneCFastslot.Wirelessconnecvitycanbe
addedtotheVB9001boardwithanoponalVIAEMIO-5531USBWi-Fi&Bluetoothmodule.
TheVIAVB9001iscompablewithWindows7,WindowsCE5.0andQNX.Inaddion,theVIASmartETK
(EmbeddedToolKit)hasbeenaddedwhichcomprisesofanumberofAPIs,includingaBIOSashtoolfor
controllingtheBIOSsystem,WatchdogTimer(WDT)forsafeguardingagainstsystemcrashes,GPIOaccess,and
Hardware Monitoring.
1.1 Key Features
• Compact 3.5” SBC form factor
•Poweredby1.06GHzVIAEden®X1CPU
•SupportsintegratedVIAC-9HDDX93D/2DgraphicvideowithMPEG-2,WMV9,VC1&H.264video
decodingacceleraon
•Fanlessandultra-lowpowerconsumpon
• Supports 1GB DDR3 SDRAM onboard
• Supports SATA connector and CFast slot
•SupportsveGigabitEthernetports,COM,andtwoUSB2.0pinheadersfor4ports
•SupportsDigitalI/Opinheader(4GPI+4GPO)
• Supports power by 5V DC-in
• VIA Smart ETK package
•Windows7,WindowsCE5.0,QNXoperangsystem
2
VB9001 User Manual
1.2 ProductSpecicaons
Processor
• 1.06GHzVIAEden®X1(Fanless)
Chipset
• VIAVX900MediaSystemProcessor
BIOS
• AMIApoUEFIBIOS,8MbitFlashmemory
System Memory
• 1GB DDR3 SDRAM onboard
Storage
• 1 x SATA connector
• 1 x CFast slot
Graphic
• IntegratedVIAC-9HDDX93D/2DgraphicswithMPEG-2,WMV9,VC1andH.264videodecoding
acceleraon
LAN
• 5 Realtek RTL8111G PCIe Gigabit Ethernet controllers
Onboard I/O
• 1 x SATA connector
• 1 x SATA power connector
• 1 x VGA pin header
• 2 x USB 2.0 pin header for 4 ports
• 1xDigitalI/Opinheader(4GPI+4GPO)
• 1 x Fan connector
• 1 x Power LED
• 1 x CFast slot
• 1xCMOSbaeryconnector
• 1 x Clear CMOS jumper
Back Panel I/O
• 1 x COM port
• 5 x Gigabit Ethernet ports
• 1 x DC-in jack
Power Supply
• 5V DC-in jack
Operang System
• Windows7,WindowsCE5.0,QNX
3
VB9001 User Manual
VIA Smart ETK
• BIOSashtool,Hardwaremonitor,Watchdogmer,GPIO
Operang Temperature
• 0°C ~ 60°C
Operang Humidity
• 0%~95%(non-condensing)
Form Factor
• 3.5"SBC(146mmx102mm,5.7"x4")
Compliance
• CE
• FCC
Note:
AstheoperangtemperatureprovidedinthespecicaonsisaresultofthetestperformedinVIA’schamber,
anumberofvariablescaninuencethisresult.Pleasenotethattheworkingtemperaturemayvarydependingon
theactualsituaonandenvironment.Itishighlyrecommendedtoexecuteasolidtesngprogramandtakeallthe
variablesintoconsideraonwhenbuildingthesystem.Pleaseensurethatthesystemrunswellundertheoperang
temperatureintermsofapplicaon.
4
VB9001 User Manual
1.3 Layout Diagram
Figure 1: Layout diagram of the VB9001 (back panel I/O)
Figure 2: Layout diagram of the VB9001 (right side)
Figure 3: Layout diagram of the VB9001 onboard (top side)
Figure 4: Layout diagram of the VB9001 onboard (boom side)
COMGigabit Ethernet
DC-in
VIA VX900 chipset
SPI
LPC
DDR3 SDRAM Front panel
GPIO
SATA
SATA power
Fan connector
Clear CMOS jumper
1.06GHz VIA E
den X1 CPU
VGA USB 2.0
DDR3 SDRAM
CFast CMOS baery connector
5
VB9001 User Manual
1.4 Product Dimensions
Figure 5: Mounng holes and dimensions of the VB9001
Figure 6: External I/O port dimensions of the VB9001 (back panel)
Figure 7: External I/O port dimensions of the VB9001 (right side)
68mm
22mm
49mm
87mm
106mm
29mm
134.5mm
146mm
102mm
8.5mm
O 3.5mm
3mm3mm
95mm
3mm
6
VB9001 User Manual
1.5 HeightDistribuon
Figure 8: Height distribuon of the VB9001 (top side)
Figure 9: Height distribuon of the VB9001 (boom side)
Height: 7mm
Height: 8mm
Height: 25mm
Height: 8mm
Height: 10mm
Height: 9mm
7
VB9001 User Manual
2. External I/O Pin Descripons and Funconality
TheVB9001hasawideseleconofinterfacesintegratedintothesystem.Itincludesaseleconoffrequently
used ports as part of the external I/O coastline.
2.1 COM port
The VB9001 is equipped with a COM port which supports RS-232. The pinouts of the COM port are shown
below.
Table 1: COM port pinouts
2.2 Gigabit Ethernet Port
TheVB9001comeswithveGigabitEthernetportsthatsupporthigh-speeddatatransmission.EachGigabit
Ethernetportusesa8Posion8Contact(8P8C)receptacleconnectorcommonlyknownasRJ-45,whichisfully
compliantwithIEEE802.3(10BASE-T),802.3u(100BASE-TX),and802.3ab(1000BASE-T)standards.Thepinouts
of the Gigabit Ethernet port are shown below.
Table 2: Gigabit Ethernet port pinouts
Pin Signal
1 DCD
2 RX
3 TX
4 DTR
5 GND
6 DSR
7 RTS
8 CTS
9 RI
Pin Signal
1 MDI3-
2 MDI3+
3 MDI2-
4 MDI2+
5 MDI1-
6 MDI1+
7 MDI0-
8 MDI0+
18
51432
6789
Figure 10: COM port diagram
Figure 11: Gigabit Ethernet port
8
VB9001 User Manual
EachGigabitEthernetporthastwoindividualLEDindicatorslocatedonthefrontsidetoshowitsAcve/Link
status and Speed status.
Table 3: Gigabit Ethernet port LED color denions
2.3 DC-in Jack
TheVB9001comeswithaDC-injackthatcarriesa5VDCexternalpowerinput.Thespecicaonandpinoutsof
the DC-in jack are shown below.
Table 4: DC-in jack pinouts
Table 5: DC-in jack specicaon pinouts
Link LED
(Le LED on RJ-45 port)
Acve LED
(Right LED on RJ-45 port)
LinkoLEDisoLEDiso Link LED AcveLED
Speed_10Mbit Noash Orange Flash
Speed_100Mbit The Green LED is on Orange Flash
Speed_1000Mbit The Red LED is on Orange Flash
Pin Signal
1 +5V
2 GND
3 GND
1
2
Figure 12: DC-in jack diagram
Physical Specicaon
Outer Diameter 6.0mm
Inner Diameter 2.0mm
Barrel Depth 8.2mm
Electrical Specicaon
Input Voltage +5V
2.0m
m
6.0mm
Figure 13: DC-in jack specicaon diagram
9
VB9001 User Manual
3. Onboard I/O
ThischapterprovidesinformaonabouttheonboardconnectorandpinheadersoftheVB9001mainboard.
3.1 USB 2.0 Pin Header
TheVB9001comeswithtwoUSB2.0pinheadersthatenabletwoaddionalUSB2.0ports.Thepinheader
blocks are labeled as “USB1” and "USB2". The pinouts of the two USB 2.0 pin headers are shown below.
Table 6: USB 2.0 pin header pinouts
3.2 Front Panel Pin Header
The VB9001 comes with a front panel pin header which provides access to the system LED, HDD LED, power
buonandresetswitch.Thefrontpanelpinheaderislabeledas“F_PANEL1".Thepinoutsofthefrontpanel
pin header are shown below.
Table 7: Front panel pin header pinouts
Pin Signal Pin Signal
1 +5VUSB 2 +5VUSB
3 USB1: USB1-
USB2: USB3-
4 USB1: USB0-
USB2: USB3+
5 USB1: USB1+
USB2: USB3+
6 USB1: USB0+
USB2: USB3+
7 GND 8 GND
9 - 10 GND
Figure 14: USB 2.0 pin header diagram
Pin Signal Pin Signal
1 +5VSB 2 +5V
3 +5VSB 4 -HD_LED
5 PW_LED 6 PW_BN-
7 - 8 GND
9 GND 10 RST_SW-
11 GND 12 GND
USB1
11
USB2
11
1
F_PANEL1
1
Figure 15: Front panel pin header diagram
10
VB9001 User Manual
3.3 SPI Connector
TheVB9001comeswithaSPIashconnectorwhichislabeledas"SPI1".TheSPI(SerialPeripheralInterface)
ashconnectorisusedtoconnecttheSPIBIOSprogrammingxtureforupdangtheSPIashROM.The
pinouts of the SPI connector are shown below.
Table 8: SPI connector pinouts
3.4 LPC Pin Header
TheVB9001hasoneLPCpinheaderlabeledas"LPC1"whichisusedforconnecngLPCdevices.Thepinoutsof
the LPC pin header are shown below.
Table 9: LPC pin header pinouts
Pin Signal
1 NA
2 NA
3 MSPIDO
4 MSPIDI
5 MSPICLK
6 MSPISSO
7 GND
8 SPIVCC
Pin Signal Pin Signal
1 +3.3V 2 -LPCRST
3 PCICLK1 4 LAD0
5 -FRAME 6 LAD1
7 LAD3 8 LAD2
9 GND
1
SPI1
1
Figure 16: SPI connector diagram
1
LPC1
1
Figure 17: LPC pin header diagram
11
VB9001 User Manual
3.5 GPIO Pin Header
The VB9001 comes with a GPIO pin header labeled as “GPIO1”which supports up to 8 GPI and 8 GPO signals.
The8inputand8outputsignalscanbeprogrammedtoreadorcontroldevices,withinputoroutputdened.
The pinouts of the GPIO pin header are shown below.
Table 10: GPIO pin header pinouts
3.6 VGA Pin Header
The VB9001 comes with a VGA pin header labeled as “VGA1” which uses a VGA cable connector to connect to
any analog VGA monitor. The pinouts of the VGA pin header are shown below.
Table 11: VGA pin header pinouts
Pin Signal Pin Signal
1 GPIO1 2 GPIO5
3 GPIO2 4 GPIO6
5 GPIO3 6 GPIO7
7 GPIO4 8 GPIO8
9 +5VSB 10 GND
11 +5VSB 12 GND
13 +5VSB 14 GND
15 +5VSB 16 GND
17 +3.3V 18
Pin Signal Pin Signal
1 GND 2 +5V
3 RED 4 DDCDATA
5 GREEN 6 DDCCLK
7 BLUE 8 HS
9 GND 10 VS
11 GND 12 GND
1
GPIO1
1
Figure 18: GPIO pin header diagram
1
VGA1
1
Figure 19: VGA pin header diagram
12
VB9001 User Manual
3.7 SATA Connector
The VB9001 comes with a SATA connector on board which supports up to 3Gb/s transfer speeds. The SATA
connector is labeled as “SATA1". The pinouts of the SATA connector are shown below.
Table 12: SATA connector pinouts
3.8 SATA Power Connector
The VB9001 comes with a SATA power connector which is used to power the SATA hard drive. The SATA power
connector is labeled as “SATA_PWR1”. The pinouts of the SATA power connector are shown below.
Table 13: SATA power connector pinouts
Pin Signal
1 GND
2 STXP_0
3 STXN_0
4 GND
5 SRXN_0
6 SRXP_0
7 +5V
Figure 20: SATA connector diagram
Pin Signal
1 +5V
2 NA
3 GND
1
SATA1
1
1
SATA_PWR1
1
Figure 21: SATA power connector diagram
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44

VIA Technologies VB9001 User manual

VIA Technologies
Brand
VIA Technologies
Model
VB9001
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents