Pandigital PANSCN08 Quick start guide

Brand: Pandigital

Model: PANSCN08

Type: Quick start guide

Package contents:

 Handheld Wand Scanner  Calibration Sheet  USB Power Adapter  USB Cable

 Cleaning Cloth  microSD card  Storage pouch

 Quick Start Guide  User Guide  PageManager Software (on microSD card)

Turn scanner on

Press and hold the Scan button for 2 seconds.

Wait until both green and red LEDs turn o.

Calibrate the scanner

a. Lay the calibration sheet on a ﬂat surface, printed side up.

b. Place the scanner on the white area of the calibration sheet.

c. Press and hold both the Scan and PDF JPG buttons for 3

seconds to turn on and enter the calibration mode.

d. When C01 appears on the LCD and the red LED ﬂashes, slide the

scanner down across the white area of the calibration sheet.

e. When the ﬁrst scan is ﬁnished, C02 appears on the LCD.

f. Slide the scanner back up over the white area.

g. When the calibration is complete, 777/888 appears on the LCD,

and then the scanner automatically turns o.

h. Carefully place the calibration sheet back into the plastic sleeve and store until next use.

Handheld Wand Scanner

PANSCN08

Customer Support: http://www.pandigital.net/support

Insert and Charge the battery

Before the ﬁrst time use, make sure the battery

is installed as shown.

Charge the battery until the red LED turns green.

Quick Start Guide

Connect to computer or Connect to USB Power Adapter

Insert microSD card

Insert an unlocked (writable) microSD card into

the memory card slot.

Continued 

Customer Support: http://www.pandigital.net/support

Quick Start Guide

Choose Scan settings

a. Press STD HQ to choose desired resolution

(STD=300dpi, HQ=600 dpi)

b. Press Color BW to choose document color (Color=color, BW=grayscale)

c. Press PDF JPEG to choose your desired ﬁle format.

Scan your document

a. Be sure a microSD card is inserted into the scanner.

b. Place document on ﬂat surface. If book, hold ﬁrmly with one hand.

c. Hold scanner in your hand, press Scan

(SP0 appears on the LCD).

d. Place the scanner horizontally on document, lining up the

start-scanning position marked on the sides of the scanner with

the left edge of your document.

e. Hold the scanner and glide it gently over the surface of the page.

f. To obtain an optimal scanned image, keep your speed at SP0.

g. After scanning, press the Scan button. If the page scanned

successfully, 001 appears on the LCD.

View or Download scanned images

A. Remove microSD from scanner and insert into card reader connected to your computer

B. Connect the scanner to your computer via USB cable.

Computer System Requirements

Operating system: Windows XP Pro SP3+, Windows Vista, Windows 7

Mac 10.5 or later (Intel based) (Mac can only be used for USB ﬁle transfer)

USB Port: USB 2.0 or USB 1.1

After Successful Connection

An additional drive is titled Removable Disk [drive leer] or the personalized title you may

have previously assigned to your memory card.

File Naming Convention

Your scanned images are stored in a folder on your microSD card:

JPG ﬁles are stored in a sub folder titled DCIM/100PHOTO

PDF ﬁles are stored in a sub folder titled DCIM/200DOC

Each scanned image is given a ﬁle name with the preﬁx PDI_ followed by a 4-digit

sequential number in the order the images are stored, i.e., PDI_0001.jpg, PDI_0002.jpg, etc.

Page Two

Turn scanner o

Press & hold the Scan button for 3 seconds.

The scanner automatically turns o if left idle for 3 minutes.

QSG-E_PANSCN08_v1.0_01-11

Pandigital PANSCN08 Quick start guide

Pandigital PANSCN08 Quick start guide

Pandigital PANSCN08 Quick start guide

Related papers

Other documents