ROOMS TO GO 30511768 Assembly Instructions

ROOMS TO GO
Brand
ROOMS TO GO
Model
30511768
Type
Assembly Instructions

This manual is also suitable for

Drawer
Rail x 6
9002 6 Drawer Dresser
Assembly Instructions
Page 1 of 9
WI-1220
Parts List
1
Parts in Box A:
Note: Do not assemble
using power tools.
This can cause the bolts
to be overtightened
Use 2 People
FPost x 4
ATo p Panel x 1
BBottom Panel x 1
CSupport Bar x 2 EBack Panel (Narrow) x 1
DBack Panel (Wider) x 1
Side Panel
(Left Hand) x 1
Parts in Box B:
G J Side Panel
(Right Hand) x 1
O
Drawer Side
(Left Hand) x 6
P
Drawer Side
(Right Hand) x 6
Center
Frame x 1
H
KDrawer
Bottom x 6
LDrawer
Face x 6
MDrawer
Back x 6
N
M6 x 25mm
Wood Dowel
x 24
9002 6 Drawer Dresser
Assembly Instructions
Page 2 of 9
Hardware List
2
L
6
6
7
O
N7
P
Important: Assemble the
Drawer Runner facing
Drawer Face.
1M6 x
15mm JCB
x 16
9'L' Bracket
(5005-3) x 8
14 Allen Key
x 1
7
5Wood Screw
(M4 x 20mm)
x 24
Assemble the Drawer Sides (O & P) & Drawer Rail (N)
to the Drawer Face (L).
3x 6
3M6 x
35mm JCB
x 4
2M6 x
60mm JCB
x 8
8CSK Cap Wood Screw
(M6 x 50mm) x 6
WI-1220
Spring
Washer x 8
10 Flat Washer
x 8
11
Wood Screw
(M4 x 25mm)
x 60
6
Slide the Drawer Bottom (K) into the
groove on the Drawer Sides (O & P).
4
O
K
P
L
M4 x 18mm
Wood Screw x 6
12 13 Handle
(1005) x 6
4Wood Screw
(M4 x 16mm)
x 16
9002 6 Drawer Dresser
Assembly Instructions
Page 3 of 9
Assemble the Drawer Back (M) to
the Drawer Sides (O & P).
5
6
6O
M
P
Turn the Drawer over to fit angled 25mm Wood
screws (6) to the Drawer Rail (N).
6
M
6
N
L
x 6
WI-1220
1
x 8
8
G
Bottom holes
to assemble
Bottom Panel J
Bottom holes
to assemble
Bottom Panel
Fit the 'L' Bracket to the Side Panel (G & J).
7
3
1
x 2
9002 6 Drawer Dresser
Assembly Instructions
Page 4 of 9
Fit the Side Panel- Right Hand (J) & Center Frame (H)
to the Top Panel (A).
8
WI-1220
A
J
Holes to assemble
Bottom Panel
H
Back
Rail facing back
Important:
Drawer Runner
facing front.
Fit the Support Bar (C) to the Side Panel- Right Hand (J) &
Center Frame (H) as shown.
9
1
x 2
A
H
C
C
J
Back
33
H
Slide the Back Panel- Wider (D)
into the groove on the back of the
Side Panel (G & J).
9002 6 Drawer Dresser
Assembly Instructions
Page 5 of 9
Fit the other side of Side Panel- Left Hand (G) to the Top Panel (A) &
Support Bar (C).
11
1
x 4
10
G
Groove
Groove
D
J
Back
Back
G
C
A
WI-1220
9002 6 Drawer Dresser
Assembly Instructions
Page 6 of 9
Slide the Back Panel-Narrow (E) into the
groove on the back.
12
G
4
4
4
4
A4
4
4
4
J
E
D
Use screws to tighten the
Back Panel (D & E) to the
back of the frame.
13
Back
G
J
E
D
Back
WI-1220
9002 6 Drawer Dresser
Assembly Instructions
Page 7 of 9
Assembled the Bottom Panel (B)
to the frame.
14
Tighten the Back Panel- Narrow (E)
with screws.
15
Back
G
D
E
B
8
8
8
G
D
4
4
4
4
E
B
Back
WI-1220
14
JCB
L
9002 6 Drawer Dresser
Assembly Instructions
Page 8 of 9
Fit the Post (F) to the Bottom Panel (B)
as shown below.
16
B
2
F
10
11
Fit and adjust the Drawer Face (L).
17
A
B
Back
WI-1220
NOTE: Before fitting the Wood Screws.
Lossen the JCBs on the Drawer Face if
the face needs alignment.
*
9002 6 Drawer Dresser
Assembly Instructions
Page 9 of 9
After the Drawer Faces (L) are aligned,
secure with wood screws.
18
L
Finaly, fit the Handle to the Drawer Face (L).
19
WI-1220
12
13
L
5
L
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9

ROOMS TO GO 30511768 Assembly Instructions

ROOMS TO GO
Brand
ROOMS TO GO
Model
30511768
Type
Assembly Instructions
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents