2. Toro
  3. Pump Bracket Kit, TX 1000 Compact Tool Carrier

Toro Pump Bracket Kit, TX 1000 Compact Tool Carrier Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Toro Pump Bracket Kit, TX 1000 Compact Tool Carrier Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
FormNo.3434-498RevA
PumpBracketKit
TX1000CompactToolCarrier
ModelNo.138-7172
InstallationInstructions
Installation
1
PreparingtheMachine
NoPartsRequired
Procedure
1.Parkthemachineonalevelsurface.
2.Removeanyattachments.
3.Raisetheloaderarmsandsecurewiththe
cylinderlocks.
4.Engagetheparkingbrake,shutofftheengine
andremovethekey.
5.Toggletheloaderarmleverbackandforthto
relievethepressureintheliftcylinders.
2
RemovingtheCovers
NoPartsRequired
Procedure
1.Removethefrontcover(Figure1).
g256988
Figure1
1.Upperbolt—3/8x1inch
(2)
3.Washer(2)
2.Frontcover
4.Lowerbolt—5/16x5/8
inch(2)
2.Removethetopcover(Figure2).
g291502
Figure2
1.Bolt—3/8x1inch(2)
2.Topcover
©2019—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.T oro.com.
OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved
*3434-498*A
3
RemovingthePump
Bracket
NoPartsRequired
Procedure
1.Markthelocationofthehosesconnectedtothe
2teettings(Figure3).
g290277
Figure3
1.Teettings
2.Pumpmountbracket
2.Disconnectthehosesfrombothteettingsand
movethemtotheside(Figure3).
3.Removethe2boltssecuringthebrackettothe
pump(Figure4).
g290333
Figure4
1.Bolt(2)
4.Removethepumpmountbracket(Figure5).
Retainthewasherandspacer.
g290334
Figure5
1.Bolt4.Nut
2.Washer5.Bracket
3.Spacer
2
5.Removeandretaintheisolatormountand
fasteners(Figure6).
g290336
Figure6
1.Bolt—5/16x7/8inch(2)3.Nut—5/16inch(2)
2.Isolatormount
4
InstallingtheNewBracket
Partsneededforthisprocedure:
1Pumpmountbracket
1Bulkheadbracket
2
Socket-headbolt
1
Bolt(3/8x2-3/4inch)
1
Nut(3/8inch)
1Thread-lockingcompound
Procedure
1.Installtheisolatormounttothepumpmount
bracketusingthefastenersremovedpreviously
(Figure7).
g290588
Figure7
1.Bolt—5/16x7/8inch(2)
3.Isolatormount
2.Pumpmountbracket
4.Nut—5/16inch(2)
3
2.Installthepumpmountbracketandbulkhead
brackettothecrossbracketonthemachine
(Figure8).
g290586
Figure8
1.Bolt(3/8x2-3/4inches)5.Nut(3/8inch)
2.Existingwasher6.Pumpmountbracket
3.Existingspacer
7.Bulkheadbracket
4.Crossbracket
3.Addthread-lockingcompoundtothe
socket-headboltsandsecurethebrackettothe
pump(Figure9).Torquetheboltsto43to52
N∙m(32to38ft-lb).
g290589
Figure9
1.Socket-headbolt—M10(2)
4.Installthetee-ttingsthatwereremoved
previously(Figure10).T orquetherstbulkhead
nutoneachttingto43to52N∙m(32to38
ft-lb),andlooselyinstallthesecondnut.
g290445
Figure10
1.Teetting
3.Looselyinstallthisnut.
2.Torquethisnut.
5.Installthehosestothemarkedlocations(Figure
11)andtorquethemto37to45N∙m(27to33
ft-lb).
Note:Ensurethatnoneofthehosesare
twisted.
4
g290444
Figure11
6.Tightenthesecondbulkheadnutonbothttings
andtorqueto37to45N∙m(27to33ft-lb).
5
InstallingtheCovers
NoPartsRequired
Procedure
1.Installthetopcover(Figure12)
g247902
Figure12
1.Bolt—3/8x1inch(2)
2.Installthefrontcover(Figure13).
g256988
Figure13
1.Upperbolt—3/8x1inch
(2)
3.Washer(2)
2.Frontcover
4.Lowerbolt—5/16x5/8
inch(2)
3.Removethecylinderlocksandstorethem.
4.Startthemachineandlowertheloaderarms.
5
Notes:
Notes:
/