2. Highwood
  3. AD-KING1-ACE
AD-KING1-ACE

Highwood AD-KING1-ACE Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Highwood AD-KING1-ACE Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
A
For information on Care and Cleaning or to register your
highwood product, please visit www.highwood-usa.com.
PAGE 1 OF 2
INCLUDED TOOLS
5/32" HEX KEY
IMPORTANT!
DO NOT fully tighten the bolts until all
bolts are started. Once all bolts are inserted,
go back & tighten all the bolts.
Retain these instructions for future reference
HARDWARE
T-15 TORX BIT
high
wood
NATURE'S CLOSEST RIVAL
CUSTOMER-SUPPLIED TOOLS
Cordless screwdriver/drill OR
Multi-bit handle for the Torx bit.
Adirondack Collection
King Hamilton Folding & Reclining Adirondack Chair
Assembly Guide
1) Attach Seat to Back using bolt C.
2) Repeat on other side.
AD-KING1
07.22.2016
A
3) Attach Back Support Rail (Shorter Board)
to Back Support Sides with four A screws.
x10
BACK
SEAT
C
A
4) Attach Leg to Arm
Assembly using bolt B.
5) Repeat on other side.
B
Position Leg With
Washer Facing
This Direction
B
C
x4
x4
#7 x 1-5/8"
1/4"-20 x 2"
1/4"-20 x 3"
B
C
For information on Care and Cleaning or to register your
highwood product, please visit www.highwood-usa.com.
PAGE 2 OF 2
high
wood
NATURE'S CLOSEST RIVAL
Adirondack Collection
King Hamilton Folding & Reclining Adirondack Chair
Assembly Guide
AD-KING1
07.22.2016
BACK
ARM
C
SEAT
Board Faces Out
(From Step 3)
6) Insert bolt C from Arm, through
Back Support Side, into Back.
7) Repeat on other side.
8) Attach Front Leg to Seat using Bolt B.
9) Repeat on other side.
10) Attach Front Leg Support to
Front Leg with three A screw.
11) Repeat on other side.
LEG
B
SEAT
A
IMPORTANT NOTE!
NEVER adjust the level of recline while you are sitting in the chair, or while anyone
else is in the chair. Always adjust with an empty chair and ensure that the
back-support is completely secure in the recline slots on each side of the chair.
To fold the chair, lift the back-support and gently push down on the back of
the chair. The chair will collapse down to floor level.
/