Generation Lighting WB1960ADB Installation guide

Brand
Generation Lighting
Model
WB1960ADB
Type
Installation guide

This manual is also suitable for

1
Installation Instructions for
Thayer Wall
1.0
WB1960
WB1960
JUNCTION BOX
Wall
CAUTION RISK OF FIRE-
This product must be installed in accordance with the
applicable installation code by a person familiar with the
construction and operation of the product and the hazards
involved.
Use minimum 90°c supply conductors.
GP I :ENERAL RODUCT NFORMATION
These fixtures are intended to be installed utilizing NEC compliant junction
boxes.
This product is safety listed for damp locations.
Incandescent lamps may be dimmed with a standard incandescent dimmer.
LED lamps may be dimmed with a LED dimmer. Consult lamp manufacturer
for additional information.
Temporarily install the mounting plate to the junction box.
Mark the anchor locations through the holes on the mounting plate and remove the mounting plate.
Drill appropriate sized holes and install the anchors.
Secure the mounting plate to the junction box and screw the anchor screws into the anchors.
Install the candle tube by sliding it over the socket.
Screw the lamp into the socket. Refer to the label on the lamp socket for Max Wattage information.
Connect the fixture to a suitable ground in accordance to local electrical codes.
Connect the white fixture wire (square and/or rigid) to the neutral power line wire with a wire nut.
Connect the black fixture wire (round and/or smooth) to the hot power line wire with a wire nut.
Neatly place all wires into the junction box, place the fixture base onto the mounting plate, and secure it in place using the
fixture screws.
1
2
3
4
1
1
5
6
1A
LAMP
MOUNTING PLATE
FIXTURE SCREW
9
8
5
CANDLE TUBE
SOCKET
6
10
10
7
MOUNTING
PLATE
ANCHOR
ANCHOR
SCREW
3 4
3 4
8
9
10
2
SAVETHESE INSTRUCTIONS!
7400 Linder Ave, Skokie, 160077IL
800.969.3347
www.generationlighting.com
© 2019 Generation Lighting.All rights reserved.
The "Generation Lighting" graphic is a registered trademark of
Generation Lighting. Generation Lighting reserves the right to
change specifications for product improvements without notification.
  • Page 1 1
  • Page 2 2

Generation Lighting WB1960ADB Installation guide

Brand
Generation Lighting
Model
WB1960ADB
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents