1
Installation Instructions for
Temporarily install the mounting plate to the junction box.
Mark the anchor hole locations on the mounting plate and remove the mounting plate.
Drill appropriate size holes at the marked locations and install the anchors.
Secure the mounting plate to the junction box.
Screw the anchor screws into the anchors.
Install the candle follower by placing it on top of the candle tube.
Screw the lamp into the socket. Refer to the label on the socket for Max Wattage Information.
Connect the fixture ground wire to a suitable ground in accordance to local electrical codes.
Connect the white fixture wire to the neutral power line wire with a wire nut.
Connect the black fixture wire to the hot power line wire with a wire nut.
Mount the fixture base onto the mounting plate and secure it with the fixture screws, then install the caps over the screws.
1
2
3
4
5
Conant Wall
1.0
WB1827
WB1827
Wall
CAUTION RISK OF FIRE-
This product must be installed in accordance with the
applicable installation code by a person familiar with the
construction and operation of the product and the hazards
involved.
Use minimum 90°c supply conductors.
6
GP I :ENERAL RODUCT NFORMATION
These fixtures are intended to be installed utilizing compliant junctionNEC
boxes.
This product is safety listed for damp locations.
Incandescent lamps may be dimmed with a standard incandescent dimmer.
LED LEDlamps may be dimmed with a dimmer. Consult lamp manufacturer for
additional information.
1A
JUNCTION BOX
MOUNTING
PLATE
9
10
FIXTURE SCREW
CAP
11
LAMP
CANDLE FOLLOWER
CANDLE TUBE
7
6
7
ANCHOR
ANCHOR
SCREW
8
9
10
11
3 5
Page is loading ...
Page is loading ...
SAVE THESE INSTRUCTIONS!
4
7400 Linder Ave, Skokie, 160077IL
800.969.3347
www.Feiss.com
© 2017 Feiss.All rights reserved.The "Feiss" graphic is a
registered trademark of Feiss. Feiss reserves the right to
change specifications for product improvements without notification.
A Generation Brands Company
-
1
-
2
-
3
-
4
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
in other languages
- français: Feiss WB1827CH Guide d'installation
- español: Feiss WB1827CH Guía de instalación
Related papers
-
Feiss WB1780WI Installation guide
-
Generation Lighting WB1843 Installation guide
-
-
Generation Lighting WB1900 Installation guide
-
-
-
Generation Lighting WB1960PN Installation guide
-
Generation Lighting WB1775ORB Installation guide
-
-
Generation Lighting WB1874 Installation guide
