Diebold Nixdorf BEETLE /iSCAN EASY Non Cash Installation guide

BEETLE /iSCAN EASY Non Cash

Installation manual

May 2019

01750249243E

Copyright

All rights, including rights of translation, reproduction by printing, copying or similar methods,

in part or in whole, are reserved.

the grant of a patent or the registration of a utility model. Subject to availability and technical

modifications. All names of hardware and software products mentioned in this manual are

trade names and/or trademarks of their respective manufactures.

Contents

About this Manual ...................................................................................................................... 1

Further Documentation ............................................................................................................. 1

Warranty .................................................................................................................................... 2

ESD (Electrostatic Sensitive Devices) ......................................................................................... 2

Important Notes ......................................................................................................................... 3

Connecting Peripherals ........................................................................................................... 4

Customer Requirements ............................................................................................................ 5

Components ............................................................................................................................... 6

Unpacking and Checking the System ......................................................................................... 7

Installing the BEETLE /iSCAN EASY in the Store ......................................................................... 8

Delivery Unit ...................................................................................................................... 10

Drill Template BEETLE /iSCAN EASY with Socket ............................................................... 11

Drill Template BEETLE /iSCAN EASY without Socket ......................................................... 12

Installing the standard Pole Light ............................................................................................. 13

Installing the ADA-II Pole Light ................................................................................................. 20

Installing the Security Scale ...................................................................................................... 22

Ambient conditions ............................................................................................................... 22

Requirements ........................................................................................................................ 22

Installing ................................................................................................................................ 23

Connecting the System............................................................................................................. 25

Start up .................................................................................................................................. 25

Power Connection and LAN Support .................................................................................... 25

Disconnecting the System from the Mains ........................................................................... 27

Cleaning Instructions ................................................................................................................ 28

Approved Cleaning Materials ............................................................................................... 28

25BDimensions ............................................................................................................................... 28

No Security Scale ................................................................................................................... 29

One Bag Security Scale .......................................................................................................... 31

Two Bags Security Scale lenghtwise ..................................................................................... 33

Two Bags Security Scale across ............................................................................................. 35

Four Bags Security Scale ....................................................................................................... 37

Block Diagram ....................................................................................................................... 39

Technical Data ....................................................................................................................... 41

Environmental Conditions .................................................................................................... 43

Certificates ............................................................................................................................ 44

CE Marking ......................................................................................................................... 44

CSA ..................................................................................................................................... 44

FCC-Class A Declaration ..................................................................................................... 44

30BRecycling the BEETLE /iSCAN EASY ....................................................................................... 44

Introduction

BEETLE /iSCAN EASY Non Cash 1

About this Manual

This manual refers to technically trained personnel only.

It provides all necessary site preparation information for installing the BEETLE /iSCAN EASY

at site.

Notes

are marked by this symbol.

Caution!

Identifies action requiring caution.

The responsibility for all technical and special prerequisites for the installation of the

BEETLE /iSCAN EASY is borne by the customer. A detailed list of customer responsibilities

is given in this manual.

Installation as well as connection of BEETLE /iSCAN EASY may only be executed by technically trained

personnel.

The safety instructions given in this document should be strictly followed when handling the

BEETLE /iSCAN EASY. Further safety, installation, and maintenance instructions can be found in the

manuals supplied with the components.

In case of doubts or questions please contact Diebold Nixdorf.

Further Documentation

Find the „User Manual“ (Hardware) on the Diebold Nixdorf Internet.

Warranty

BEETLE /iSCAN EASY Non Cash

2

Warranty

Diebold Nixdorf generally guarantees a warranty engagement for 12 months beginning with the date

of delivery. This warranty engagement covers all damages which occur despite a normal use of the

product.

Damages because of

 improper or insufficient maintenance,

 improper use of the product or unauthorized modifications of the product,

 inadequate location or surroundings

will not be covered by the warranty.

For further information on the stipulation consult your contract.

All parts of the product which are subject to wear and tear are not included in the warranty

engagement. For detailed warranty arrangements please consult your contract documents.

ESD (Electrostatic Sensitive Devices)

Electrostatic

sensitive devices (ESD) may be marked with this sticker.

When you handle components fitted with ESDs, you must observe the following points under all

circumstances:

 Unplug the power before inserting or removing components containing ESDs.

 While working with ESDs you must discharge yourself by using an ESD wrist strap or

grounding cable to connect yourself at all times to the earth connector of power socket or a

grounded object.

 Place all components containing ESDs on a static-safe base.

 The equipment and tools you use must be free of static charges.

 Always hold boards with ESDs by their edges. Do not touch the components.

 Never touch pins or conductors on boards fitted with ESDs.

Important Notes

BEETLE /iSCAN EASY Non Cash 3

Important Notes

Appliances supplied by Diebold Nixdorf comply with the respective safety regulations for data-

processing installations and information technology installations, including electrical office

equipment for use within an office environment.

Whenever work of any kind is done on the device, as well as when data cables are plugged

and unplugged, the device must be completely

disconnected from the line voltage.

After maintenance and repair work on the cash module the module must be completely

pushed into the

BEETLE /iSCAN EASY and the front door must be closed before switching on

the device.

 Appliances may only be repaired by authorized technicians.

 Unauthorized opening of the housing or inexpert repairs can result not only in considerable

personal danger, but will also invalidate your warranty and liability protection.

 Always consult the available documentation before doing any work with this appliance.

 If this device is brought from a cold environment into a heated place of business,

condensation may occur. Before operation, the device must be completely dry. Therefore, an

acclimatization period of at least two hours must be adhered to.

 The sockets of the house installation must be easily accessible.

 Always lay the supply leads and cables in such a way that they cannot be stepped on or

tripped over.

 Only touch green marked handles and knobs for moving parts.

 Exchange damaged cables immediately.

 In order to completely disconnect the device from the power source, turn the device off and

use the separator in the fuse box or building installation.

 Make sure that no objects (such as paper clips) can reach the interior of the device, since

electrical shocks or short-circuits could result.

 To avoid overheating of the system ensure that the BEETLE /iSCAN EASY receives adequate

ventilation.

 During an electrical storm, data cables should not be plugged in or unplugged.

 Keep the device away from vibrations, airstreams/ventilations, dust, humidity and heat.

 Ensure that used parts are disposed of in an environmentally friendly manner.

 In case of an accident (such as a damaged housing, entry of liquids or foreign objects), switch

the device off and use the separator to completely remove the device from power.

 The appliance and other information technology hardware should only be connected to

electrical supply networks with a separate protective earth wire (PE). This type of electrical

supply network is referred to as a TN-S network. Do not use PEN conductors.

Also follow the recommendations set forth in DIN VDE 0100 Part 540, Appendix C2 as well as

EN50174-2, §5.4.3, National Electrical Code ANSI/NFPA 70-2005 and Canadian Electrical

Code, Part I, CSA C22.1-02. This will help prevent malfunctions.

 Turn off the device when working on the cutter of the printer.

Important Notes

BEETLE /iSCAN EASY Non Cash

4

 Always keep the ventilation slots free of obstruction to ensure adequate air circulation and

avoid overheating.

 Transport the appliance only in its original packaging (to protect it against

knocks and bumps).

 If a lithium battery is supplied with the appliance, ensure that the battery is

replaced with an equivalent type. Otherwise there is danger of explosion!

Lithium batteries may only be replaced with identical types or other types recommended by

the manufacturer.

 Batteries must be disposed of according to local regulations on the disposal of

special waste.

Connecting Peripherals

Use only shielded cables when connecting devices to the system to ensure compliance

with international Rules and Regulations for radiated emission as well as to achieve a

high immunity against external disturbances.

Customer Requierements

BEETLE /iSCAN EASY Non Cash 5

Customer Requirements

Before the BEETLE /iSCAN EASY installation can be started, the customer is held responsible to

provide the following:

• A surface made of non-flammable material (e.g. concrete or metal) must be located

underneath the BEETLE /iSCAN EASY.

• Appropriate drawings concerning location of the equipment as well as site wiring (power and

communications, paths and lengths). Location of other equipment that may generate

electrical noise, electromagnetic interference, or heat.

• Provision and installation of all communication cables wall jacks, special connectors and

associated hardware.

• Provision and installation of necessary power distribution boxes, conduits, grounds, lightning

protection devices, and associated hardware.

• Ensure that all applicable codes, regulations, and laws (including, but not limited to,

electrical, building, safety, and health) are adhered to.

• Provision and installation of auxiliary power or other equipment as required.

• Provision of storage or service as required.

• Provision of a level floor to locate the BEETLE /iSCAN EASY. The system has to be stable and

must not tilt. The maximum incline must not exceed 2%. The feet of the unit can overcome a

height difference of up to 10mm.

• Provision and installation of floor coverings and environmental systems that limit or control

static electricity build-up and discharge.

• Provision of appropriate equipment for the remote support.

The customer is responsible for relocating the Self-Checkout equipment (check stand and

components) to the final placement/installation position.

Keep the Diebold Nixdorf equipment area free from dust, smoke, lint, and other particles. Restrict

smoking, eating, and drinking around the equipment. Avoid locating the equipment near other

machines that generate ink, carbon and paper dust particles.

Please note that

Diebold Nixdorf will not take over any warranty/liability in case the

technical and environmental

requirements are not met.

Customer Requierements

BEETLE /iSCAN EASY Non Cash

6

Components

Unpacking the System

BEETLE /iSCAN EASY Non Cash 7

Unpacking and Checking the System

The BEETLE /iSCAN EASY will be delivered on a pallet (size 800 mm x 1200 mm acc. to industry

standard).

Remove the card board and the wrapping paper. Take care for the extra pole light.

Verify that the scope of delivery is identical to the information on the delivery ticket.

Should you notice any

 transport damages or

 discrepancies between package contents and delivery ticket or

 functional defects,

please inform your contracting parties or the branch office of Diebold Nixdorf immediately. Please

indicate the number of your delivery ticket and delivery ticket position and serial number of the

respective device.

We recommend

to keep the original packaging for transport at a later time

(protection from impact and shock).

Installing the Pole Light

BEETLE /iSCAN EASY Non Cash

8

Installing the BEETLE /iSCAN EASY in the Store

Caution!

Always wear safety gloves and safety shoes with steel toe caps while transporting

heavy appliances.

USA

: Safety shoes with class 1 toe cap according ASTM F 2412 and ANSI Z41.1 in its current

versions

.

Canada

: Protection CSA code 1Pxxx.

Unlock the system and open the door.

Installing the Pole Light

BEETLE /iSCAN EASY Non Cash 9

Remove the two screws near the front (see arrows).

Remove two screws (see arrows) and remove the back cover upwards.

Installing the Pole Light

BEETLE /iSCAN EASY Non Cash

10

Remove the two screws (see arrows) and remove the cover from the back side of the device.

Pull out the device of the mounting bracket.

Remove

the mounting bracket from the pallet. You need this part for the floor mounting.

Caution!

Close and lock the door. Tilt the device (max. 15°) very carefully at the edge of the

pallet and set it up at the designated site. Ensure that the installation site has the required

load

-carrying capacity.

Delivery Unit

01750252991 Screw kit for floor mounting

01750009782 ROTOR

01750097998 Hexagon head screw DIN 933 M10x60-8.8

3587100020 Washer 10,5x2,0mm

4330700428 Minigrip Poly-Bag 100 x 150mm

Installing the Pole Light

BEETLE /iSCAN EASY Non Cash 11

The following drill template has to be used to fix the BEETLE /iSCAN EASY on the floor.

Drill Template BEETLE /iSCAN EASY with Socket

All dimensions in mm

Installing the Pole Light

BEETLE /iSCAN EASY Non Cash

12

Drill Template BEETLE /iSCAN EASY without Socket

All dimensions in mm

Set the back cover in the snap hooks at the BEETLE /iSCAN EASY housing (see arrows).

Set the back cover into place and fix it with the screws removed before.

Installing the Pole Light

BEETLE /iSCAN EASY Non Cash 13

Installing the standard Pole Light

Unwrap the pole light and deposit it in a save place.

The installation might be easier when you uninstall the visual protection before.

Tilt the display upwards to the position as shown in the picture below.

Remove the screw which fixes the speaker box.

Installing the Pole Light

BEETLE /iSCAN EASY Non Cash

14

Lift the speaker box upwards and remove it forwards (see arrows).

Unplug the speaker cable.

Remove the two screws fixing it at the holder.

Installing the Pole Light

BEETLE /iSCAN EASY Non Cash 15

Remove the display upwards and place it beside the printer.

Remove four screws (see arrows) from the holder.

Remove (see arrow) the back side from the front side of the pole light.

Front side – do not remove!

Installing the Pole Light

BEETLE /iSCAN EASY Non Cash

16

Push the two tins holder as shown in the picture to the front side of the pole light.

Mount the front cover to the holder and secure it with the four screws removed before.

Plug the cable.

Page is loading ...

Diebold Nixdorf BEETLE /iSCAN EASY Non Cash Installation guide

Diebold Nixdorf BEETLE /iSCAN EASY Non Cash Installation guide

Related papers

Other documents