AGILTRON AMFPD User guide

Brand: AGILTRON

Model: AMFPD

Type: User guide

AGILTRON AMFPD is an amplified, switchable-gain InGaAs photodetector in an FC/APC connector with an operating wavelength range of 900 to 1700 nm. It features double connectors to vary gain in 10 dB steps, a buffered output for driving 50 Ω loads up to 5V, and a readable output signal from the RF SAM connector. Ideal for applications requiring high-sensitivity and precise detection of optical signals in various fields.

AGILTRON AMFPD is an amplified, switchable-gain InGaAs photodetector in an FC/APC connector with an operating wavelength range of 900 to 1700 nm. It features double connectors to vary gain in 10 dB steps, a buffered output for driving 50 Ω loads up to 5V, and a readable output signal from the RF SAM connector. Ideal for applications requiring high-sensitivity and precise detection of optical signals in various fields.

AMFPD User Guide

Contents

Chapter 1 Descripon ............................................................................. 1

Chapter 2 Setup ...................................................................................... 1

2.1 input connector .............................................................................. 1

2.2 power supply ................................................................................. 1

2.3 output ........................................................................................... 2

2.4 Gain (Av )Adjustment ................................................................... 3

Chapter 3 Specicaons ......................................................................... 4

Chapter 4 Mechanical Drawing .............................................................. 5

1

Chapter 1 Descripon

The AMFPD is an amplied, switchable-gain, InGaAs photodetector in an FC/APC

Connector with an operang wavelength range of 900 to 1700 nm. Double

connector(J2) allows the user to vary the gain in 10 dB steps. A buered output

drives 50 Ω load impedances up to 5 V. The output signal is readable from the RF

SAM connector.

Chapter 2 Setup

2.1 input connector

See Fig 1, Input opc signal is connected with FC/APC connector.

Fig 1 AMFPD top view

2.2 power supply

The power supply is double DC 12V. To connect J1(2.54mm 3 pin connector), see

Fig 2.

2

Fig 2. AMFPD PCB view

Command power supply: Globtek GT-51084-12N12

2.3 output

Ouput is connected with RF SAM female adapter. A buered output drives 50 Ω load

up to 5V. See Fig 3

Fig 3. AMFPD back view

3

2.4 Gain (Av )Adjustment

The responsivity of a photodiode can be dened as a rao of generated

photocurrent (IPD) to the incident light power (P) at a given wavelength:

R(λ) = Ipd / P

Gain (Av )Adjustment:

Av= Ipd x Rf

Terminal J2 shut connector posion compaered with Gain:

Rf =100

Rf = 1000

Rf =10000

Rf =100000

4

Chapter 3 Specicaons

5

Chapter 4 Mechanical Drawing

1
2
3
4
5
6
7

AGILTRON AMFPD User guide

Brand: AGILTRON

Model: AMFPD

Type: User guide

AGILTRON AMFPD is an amplified, switchable-gain InGaAs photodetector in an FC/APC connector with an operating wavelength range of 900 to 1700 nm. It features double connectors to vary gain in 10 dB steps, a buffered output for driving 50 Ω loads up to 5V, and a readable output signal from the RF SAM connector. Ideal for applications requiring high-sensitivity and precise detection of optical signals in various fields.

Download PDF

Other documents