Adlink cPCI-6930 User manual

Advance Technologies; Automate the World.

Manual Rev.: 2.02

Revision Date: November 13, 2014

Part No: 50-15080-1020

cPCI-6930

6U CompactPCI® Server Class Eight-Core

Intel® Xeon® E5 Processor Blade

User’s Manual

Revision History

Revision Release Date Description of Change(s)

2.00 2013/04/15 Initial release

2.01 2014/01/21 Add IPMI user’s guide

2.02 2014/11/13 Add PMC slot -12V support note

Preface iii

cPCI-6930

Preface

This document contains proprietary information protected by copy-

right. All rights are reserved. No part of this manual may be repro-

duced by any mechanical, electronic, or other means in any form

without prior written permission of the manufacturer.

Disclaimer

The information in this document is subject to change without prior

notice in order to improve reliability, design, and function and does

not represent a commitment on the part of the manufacturer.

In no event will the manufacturer be liable for direct, indirect, spe-

cial, incidental, or consequential damages arising out of the use or

inability to use the product or documentation, even if advised of

the possibility of such damages.

Environmental Responsibility

ADLINK is committed to fulfill its social responsibility to global

environmental preservation through compliance with the Euro-

pean Union's Restriction of Hazardous Substances (RoHS) direc-

tive and Waste Electrical and Electronic Equipment (WEEE)

directive. Environmental protection is a top priority for ADLINK.

We have enforced measures to ensure that our products, manu-

facturing processes, components, and raw materials have as little

impact on the environment as possible. When products are at their

end of life, our customers are encouraged to dispose of them in

accordance with the product disposal and/or recovery programs

prescribed by their nation or company.

Trademarks

Product names mentioned herein are used for identification pur-

poses only and may be trademarks and/or registered trademarks

of their respective companies.

iv Preface

Using this Manual

Audience and Scope

The cPCI-6930 User’s Manual is intended for hardware

technicians and systems operators with knowledge of installing,

configuring and operating industrial grade computer systems.

Manual Organization

This manual is organized as follows:

Chapter 1, Introduction: Introduces the cPCI-6930, its features,

block diagrams, and package contents.

Chapter 2, Specifications: Presents detailed specification infor-

mation.

Chapter 3, Functional Description: Describes the cPCI-6930

main functions.

Chapter 4, Board Interfaces: Describes the cPCI-6930 board

interfaces.

Chapter 5, Getting Started: Describes the installation of compo-

nents to the cPCI-6930 and rear transition modules.

Chapter 6, Driver Installation: Provides information on how to

install the cPCI-6930 device drivers.

Chapter 7, Utilities: Describes the utilities of the cPCI-6930.

Chapter 8, BIOS Setup: Describes basic navigation for the AMI

BIOS setup utility.

Chapter 9, Checkpoints & Beep Codes: Describes the AMI

BIOS setup utility Checkpoints & Beep Codes.

Chapter 10, IPMI User Guide: Describes the Intelligent Platform

Management Interface (IPMI) specification rev. 1.5.

Important Safety Instructions: Presents safety instructions all

users must follow for the proper setup, installation and usage of

equipment and/or software.

Getting Service: Contact information for ADLINK’s worldwide

offices.

Preface v

cPCI-6930

Conventions

Take note of the following conventions used throughout this

manual to make sure that users perform certain tasks and

instructions properly.

NOTE:

Additional information, aids, and tips that help users perform

tasks.

CAUTION:

Information to prevent minor physical injury, component dam-

age, data loss, and/or program corruption when trying to com-

plete a task.

WARNING:

Information to prevent serious physical injury, component

damage, data loss, and/or program corruption when trying to

complete a specific task.

vi Preface

This page intentionally left blank.

Table of Contents vii

cPCI-6930

Table of Contents

Revision History...................................................................... ii

Preface.................................................................................... iii

List of Figures........................................................................ xi

List of Tables........................................................................ xiii

1 Introduction ........................................................................ 1

1.1 Overview.............................................................................. 1

1.2 Features............................................................................... 2

1.3 Block Diagram ..................................................................... 3

1.4 Product List.......................................................................... 4

1.5 Package Contents ............................................................... 5

2 Specifications..................................................................... 7

2.1 cPCI-6930 Blade Specifications .......................................... 7

2.2 I/O Connectivity ................................................................. 10

2.3 Power Requirements......................................................... 11

3 Functional Description .................................................... 15

3.1 Processors......................................................................... 15

3.2 Chipset............................................................................... 17

3.3 PMC/XMC Site................................................................... 17

3.4 Intel® Turbo Boost Technology......................................... 18

3.5 Intel® Hyper Threading Technology.................................. 18

3.6 TPM................................................................................... 19

3.7 Battery ............................................................................... 19

4 Board Interfaces............................................................... 21

4.1 cPCI-6930 Board Layout ................................................... 21

4.2 cPCI-6930 Assembly Layout ............................................. 22

viii Table of Contents

4.3 cPCI-6930 Front Panel ...................................................... 23

4.4 Connector Pin Assignments............................................... 24

4.5 Switches............................................................................. 37

5 Getting Started.................................................................. 39

5.1 CPU and Heatsink ............................................................. 39

5.2 2.5" SATA Drive Installation............................................... 40

5.3 CompactFlash Card Installation......................................... 47

5.4 CFast Card Installation ...................................................... 51

5.5 PMC/XMC Module Installation........................................... 54

5.6 Installing the cPCI-6930 to the Chassis............................. 59

6 Driver Installation.............................................................. 61

7 Utilities............................................................................... 63

7.1 Watchdog Timer................................................................. 63

7.2 Preboot Execution Environment (PXE).............................. 68

8 BIOS Setup........................................................................ 69

8.1 Starting the BIOS............................................................... 69

8.2 Main Setup......................................................................... 74

8.3 Advanced BIOS Setup....................................................... 75

8.4 Chipset Configuration ........................................................ 93

8.5 Boot Settings ..................................................................... 99

8.6 Security Setup.................................................................. 101

8.7 Save & Exit Menu ............................................................ 102

9 Checkpoints & Beep Codes........................................... 105

9.1 Checkpoint Ranges.......................................................... 105

9.2 Standard Checkpoints...................................................... 105

9.3 OEM-Reserved Checkpoint Ranges................................ 114

10IPMI User Guide .............................................................. 115

10.1 Introduction...................................................................... 115

10.2 Summary of Commands Supported by BMR-AVR-cPCI. 115

Table of Contents ix

cPCI-6930

10.3 OEM Commands Summary Table................................... 117

10.4 CompactPCI Address Map .............................................. 121

10.5 Communications with IPMC............................................. 122

10.6 IPMI Sensors List............................................................. 122

10.7 Relevant Documents ....................................................... 123

Important Safety Instructions............................................ 125

Getting Service.................................................................... 127

xTable of Contents

This page intentionally left blank.

List of Figures xi

cPCI-6930

List of Figures

Figure 1-1: cPCI-6930 Functional Block Diagram..............................3

Figure 4-1: cPCI-6930 Board Layout ...............................................21

Figure 4-2: cPCI-6930 Assembly Layout .........................................22

Figure 4-3: cPCI-6930 Front Panel..................................................23

xii List of Figures

This page intentionally left blank.

List of Tables xiii

cPCI-6930

List of Tables

Table 2-1: cPCI-6930 Blade Specifications ......................................7

Table 2-2: cPCI-6930 I/O Connectivity ...........................................10

Table 4-1: cPCI-6930 Front Panel Status LED Descriptions..........23

xiv List of Tables

This page intentionally left blank.

Introduction 1

cPCI-6930

1 Introduction

1.1 Overview

The cPCI-6930 is a 6U CompactPCI® single board computer fea-

turing a single 32nm Intel® Xeon® Processor E5-2400 Series with

8/6/4-cores in LGA1356 socket mated with the Intel® C604 Series

Platform Controller Hub. The cPCI-6930 supports three channels

of DDR3-1333/1600 ECC registered SDRAM in three RDIMMs

channel up to total 48GB capacity. Graphics is provided by a Sili-

con Motion SM750 2D GPU supporting up to 1920x1440 resolu-

tion. Four front panel 10/100/1000BASE-T ports are provided by

the Intel® 82580EB Gigabit Ethernet controller.

The cPCI-6930 Series supports a 64bit/66MHz CompactPCI bus

with optional PMC site with 32/64-bit 133MHz PCI bus or

PCI-Express x8 XMC site. The 8HP cPCI-6930 provides four GbE

ports, one VGA port, three USB 2.0 ports, two USB 3.0 ports, one

DB-9 RS-232 serial port on the front panel. Onboard storage capa-

bilities include 4GB of soldered SATA NAND flash and a SATA 6

Gb/s port convertible to direct connector for an onboard 2.5" SATA

drive, CFast adapter, or CompactFlash adapter, with an onboard

2.5” SAS drive supported by BOM option (only 1

SATA/CFast/CF/SAS device supported).

A selection of optional Rear Transition Modules (RTM) provides

additional I/O functionality including two GbE ports for PICMG

2.16 support, USB 2.0 ports, PS/2 keyboard/mouse port, serial

ports, High Definition Audio, SATA ports, additional VGA/ DVI

interfaces (dependent on selected RTM), and optional CF or SD

socket. Up to eight SAS ports supporting hardware RAID via two

mini-SAS x4 connectors are available when mated with the

cPCI-R6200 RTM, and signals for two SAS ports are available on

J5 by BOM option.

For dense computing requirements, the cPCI-6930 supports oper-

ation in both a system slot and in a peripheral slot as a standalone

blade. The cPCI-6930 is compliant with the PICMG 2.9 specifica-

tion and supports system management functions based on the

Intelligent Platform Management Interface (IPMI) as well as hard-

ware monitoring of physical characteristics such as CPU and sys-

tem temperature, DC voltages and power status.

2Introduction

The cPCI-6930 is ideal for server-grade applications, providing

datacom equipment providers, system integrators, robust com-

puter makers and security sectors a flexible, cost-optimized solu-

tion for mission critical applications with a reliable, smooth path for

scalability and expansion.

1.2 Features

X 6U CompactPCI® blade in 8HP width form factor

X Supports Intel® Xeon® Processor E5-2400 Series in

LGA1356 socket, up to 8-core Xeon® E5-2448L 1.8GHz,

20MB LLC

X Intel® C604 Platform Controller Hub

X Three channels of DDR3-1333/1600 ECC registered

SDRAM via three 240-pin RDIMM, up to 48GB

X 64bit/66MHz CompactPCI® Interface based on PCI specifi-

cations, universal V(I/O)

X Supports Satellite Mode operation as a standalone blade in

peripheral slots

X One 32/64-bit, 33/66/133MHz PMC or PCI-Express x8 XMC

site

X Two USB 3.0 ports via discrete controller

X 4GB SATA NAND flash soldered onboard

X SATA 6 Gb/s direct connector for onboard 2.5" drive

X Optional CFast, CompactFlash or 2.5" SAS drive support

X Eight general purpose user programmable LEDs on front

panel for (default Port 80 status)

X Dual independent RGB outputs on front panel and rear I/O

X Four Gigabit Ethernet ports on front panel

X Compliant with PICMG 2.0, 2.1, 2.9, 2.16 standards

X Infineon SLB 9635 TT1.2 TPM support upon request

Introduction 3

cPCI-6930

1.3 Block Diagram

Figure 1-1: cPCI-6930 Functional Block Diagram

DMI

PCIe x4

Pericom

PI7C9X13

PMC1 XMC 1

PCIX

64b/133M

J1/J2 J3/J5

Intel® C600 PCH

Intel® Xeon® E5 Processor Family

2x USB 2.0

PCIe x4

Pericom

PI7C9X13

USB 3.0

Intel

82580

USB 3.0

2

VGA

SSD

SATA

1

TPM

PCIe x4

LPC

COM1

2.5” HDD

SAS/

SATA

SM750

IPMC

IPMB 0/1

COM4

COM2/3

SATA 2/3/4

SAS1/2

PCI 64b/66M

BIOS

SPI

SIO

KB/MS

6x USB,

HDA,

5xGPIO,

RTC

PCIe x1

PCIe x8

GbE 1/2/3/4

CF/CFAST

PCIe x1

PCIe x8

vRAM

SATA 0

82574

2.16

RGB

DVI

RGB

vBIOS

vRAM

1x USB 2.0

Front Panel

DD3-1333/1600 RDIMM

4Introduction

1.4 Product List

Products included in the cPCI-6930 series are:

SBC

X cPCI-6930D: 8HP width (dual-slot) 6U CompactPCI blade

featuring single Intel® Xeon® processor with four/six/eight

cores in LGA1356 socket, three channel DDR3-1333/1600

ECC RDIMM, 4x GbE, 1x VGA, 3x USB 2.0, 2x USB 3.0, 1x

RS-232 COM, 4GB onboard NAND flash, SATA direct con-

nector for onboard 2.5" drive (optional CFast/CF/SAS sup-

port), PMC/XMC site

Rear Transition Module

X cPCI-R6002: 6U 4HP width RTM with DVI-I, 2x COM, 3x

USB, 2x GbE, 2x SATA

X cPCI-R6002D: 6U 8HP width RTM with DVI-I, 2x COM, 5x

USB, 2x GbE, 3x SATA, Mic-in, Line-out, PS/2 KB/MS

X cPCI-R6100: 6U 4HP width RTM with 4x GbE, 4x USB, 2x

SATA, VGA, PS/2 KB/MS, CF & SD sockets, (Supports only

3x GbE when mating with cPCI-6930)

X cPCI-R6110: 6U 4HP width RTM with 2x GbE, 4x USB, 3x

SATA, VGA, PS/2 KB/MS, CF, & SD sockets

X cPCI-R6200: 6U 8HP width RTM with 2x GbE, 2x COM, 6x

USB, DVI-I (VGA signal only), 3x SATA, Mic-in, Line-out,

PS/2 KB/MS, 8x SAS

X cPCI-R6700D: 6U 8HP width RTM with onboard ATI E4690

GPU, 2x DVI-I, 2x GbE, 2x COM, 6x USB, Mic-in, Line-in,

Line-out, onboard PS/2 KB/MS, 3x SATA

Adapter Kits

X DB-CFast: CFast socket kit for cPCI-6930, including

adapter board and mounting hardware

X DB-6920CF-H: CompactFlash socket kit for cPCI-6930,

including adapter board, card guide and mounting hardware

X DB-SAS: 2.5" SAS drive adapter kit for cPCI-6930 including

adapter board and mounting hardware (requires BOM

option)

Introduction 5

cPCI-6930

1.5 Package Contents

The cPCI-6930 is packaged with the following components. If any

of the items on the contents list are missing or damaged, retain the

shipping carton and packing material and contact the dealer for

inspection. Please obtain authorization before returning any prod-

uct to ADLINK. The packing contents of the cPCI-6930 are

non-standard configurations and may vary depending on customer

requests.

Processor Blade

X cPCI-6930

Z CPU and memory specifications will differ depending on

options selected

Z Thermal module is assembled on the board

X 2.5" SATA drive accessory pack

X ADLINK All-in-One DVD

X User’s manual

Optional Accessories

X DB-CFast: CFast socket kit for cPCI-6930, including

adapter board and mounting hardware

X DB-6920CF-H: CompactFlash socket kit for cPCI-6930,

including adapter board, card guide and mounting hardware

X DB-SAS: 2.5" SAS drive adapter kit for cPCI-6930 including

adapter board and mounting hardware (requires BOM

option)

NOTE:

The contents of non-standard cPCI-6930 configurations may

vary depending on the customer’s requirements.

CAUTION:

This product must be protected from static discharge and phys-

ical shock. Never remove any of the components except at a

static-free workstation. Use the anti-static bag shipped with the

product when putting the board on a surface. Wear an

anti-static wrist strap properly grounded on one of the system's

ESD ground jacks when installing or servicing system compo-

nents.

6Introduction

This page intentionally left blank.

Page is loading ...

Adlink cPCI-6930 User manual

Adlink cPCI-6930 User manual

Related papers

Other documents